features 1 of 6 optimum technology matching ? applied gaas hbt ingap hbt gaas mesfet sige bicmos si bicmos sige hbt gaas phemt si cmos si bjt gan hemt rf micro devices?, rfmd?, optimum technology matching?, enabling wireless connectivity?, powerstar?, polaris? total radio? and ultimateblue? are trademarks of rfmd, llc. bluetooth is a trade- mark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks and registered tradem arks are the property of their respective owners. ?2006, rf micro devices, inc. product description 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. inp hbt ldmos rf mems SUF-1033 dc to 20 ghz, cascadable phemt mmic amplifier the SUF-1033 is a monolithically matched broadband high ip3 gain block covering dc to 20 ghz. this phemt based amplifier uses a patented self- bias network that operates from a single 5 v supply. it offers efficient cas- cadable performance in a compact 3 mm x 3 mm ceramic qfn package. it is well suited for rf lo and if driver applications. ? broadband flat gain = 10 db ? p 1db = 14 dbm at 2 ghz ? 5 v single supply operation ? low gain variation vs. tem- perature ? 50 i/o low-noise, efficient gain block applications ? broadband communications ? test instrumentation ? military and space ? lo and if mixer applications ? high ip3 rf driver applications rev a0 ds090528 9 package: qfn, 16-pin, 3 mm x 3 mm SUF-1033dc to 20 ghz, cas- cadable phemt mmic amplifier parameter specification unit condition min. typ. max. frequency of operation dc 18 ghz small signal power gain 10.2 db freq = 3 ghz 9.5 db freq = 9 ghz 7.4 db freq = 18 ghz output power at 1 db compression 13.8 dbm freq = 3 ghz 13.7 dbm freq = 9 ghz 13.2 dbm freq = 18 ghz output third order intercept point 26.1 dbm freq = 3 ghz 24.3 dbm freq = 9 ghz 22.9 dbm freq = 18 ghz input return loss 15.8 db freq = 3 ghz 13.8 db freq = 9 ghz 7.6 db freq = 18 ghz output return loss 13.6 db freq = 3 ghz 13.7 db freq = 9 ghz 27.1 db freq = 18 ghz isolation 18.0 db freq = 3 ghz 19.2 db freq = 9 ghz 20.0 db freq = 18 ghz device operating voltage 3.4 v with 33 resistor between v d and v dd test conditions: z 0 = 50 , v s = 5 v, i d = 46 ma, r bias = 33 , t = 25c, oip 3 tone spacing = 1 mhz with p out per tone = 0 dbm. circuit board data with bias tees.
2 of 6 rev a0 ds090528 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. SUF-1033 typical performance (circuit board data with bias tees) v s = 5 v, r bias = 33 , t = 25c, z = 50 absolute maximum ratings parameter rating unit total current (l d )90ma device voltage (v d ) 4.2 v power dissipation 0.378 w rf input power +20 dbm storage temperature range -65 to +150 c operating temperature range (t l ) -45 to +85 c operating junction temperature (t j )+150 c operation of this device beyond any one of these limits may cause permanent dam- age. for reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. bias conditions should also satisfy the following expression: i d v d < (t j - t l ) / r th , j-l and t l = backside of die parameter specification unit condition min. typ. max. device operating current 47 ma noise figure 4.6 db freq = 3 ghz 4.8 db freq = 9 ghz 5.8 db freq = 18 ghz thermal resistance 146 c/w junction to backside parameter units 500 mhz 3 ghz 9 ghz 12 ghz 15 ghz 18 ghz small signal gain db 10.5 10.2 9.5 8.0 8.6 7.4 output 3rd order intercept point (see note 1) dbm 27.4 26.1 24.3 21.2 21.6 22.9 output power at 1 db compression dbm 14.3 13.8 13.7 11.2 12.1 13.2 input return loss db 26.1 15.8 13.8 7.4 25.3 7.6 output return loss db 18.8 13.6 13.7 6.1 9.5 27.1 reverse isolation db 17.6 17.9 19.0 20.2 19.1 19.5 noise figure db 5.4 4.6 4.8 4.7 4.8 5.8 note 1: 0 dbm/tone, 1 mhz tone spacing caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical perfor- mance or functional operation of the device under absolute maximum rating condi- tions is not implied. rohs status based on eu directive 2002/95/ec (at time of this document revision). the information in this publication is believed to be accurate and reliable. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice.
3 of 6 rev a0 ds090528 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. SUF-1033 typical performance (circuit board data with bias tees) v dd = 5 v, i d = 46 ma, r bias = 33
4 of 6 rev a0 ds090528 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. SUF-1033 typical performance (circuit board data with bias tees) v dd = 5 v, i d = 46 ma, r bias = 33
5 of 6 rev a0 ds090528 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. SUF-1033 package drawing notes: 1. all dimensions in millimeters. 2. backside is ground. typical circuit application ordering information pin function description 2 rfin this pad is dc coupled and matched to 50 . an external dc block is required. 11 rfout/bias this pad is dc coupled and matched to 50 . bias is applied through this pad. pkg bottom gnd package bottom must be connected to rf/dc ground. part number description SUF-1033 qfn 3 mm x 3 mm package
6 of 6 rev a0 ds090528 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. SUF-1033
|
