elektronische bauelemente sm5200c voltage 200v 5.0 a schottky barrier rectifiers 01-oct-2010 rev. b page 1 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. a b e g d f c h rohs compliant product a suffix of ?-c? specifies halogen & lead-free features ? high current capability ? extremely low thermal resistance ? for surface mount application ? higher temp soldering : 250c for 10 seconds at terminals ? low revise current mechanical data ? case: molded plastic ? epoxy: ul 94v-0 rate flame retardant ? lead: axial leads, solderable per mil-std-202 method 208 guaranteed ? polarity: color band denotes cathode end ? mounting position: any maximum ratings and electrical characteristics rating 25c ambient temperatur e unless otherwise specified. single phase half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. type number symbol sm5200c units peak repetitive peak reverse voltage working peak reverse voltage maximum dc blocking voltage v rrm v rwm v r 200 v average forward current @t j =25 c i f(av) 5 a peak forward current @ 8.3 ms half sine i fsm 150 a maximum instantaneous forward voltage v f @ i fm = 5.0 a, t a = 25 c v f @ i fm = 5.0 a, t a = 75 c v f @ i fm = 5.0 a, t a = 125 c v f 0.88 0.78 0.72 v maximum dc reverse current (note 3) at rated dc blocking voltage @ t j = 25 c at rated dc blocking voltage @ t j = 100 c i r 40 700 a typical junction capacitance c j 250 pf typical thermal resistance (note 2) r jl 20 c/w voltage rate of chance (rated v r ) dv/dt 1000 v/ s operating temperature range t j -50 ~ + 150 c storage temperature t stg -65 ~ + 150 c notes: 1. measured at 1mhz and applied reverse voltage of 5.0 v d.c. 2. thermal resistance junction to lead 3. pulse test pulse width = 300 s, duty cycle Q 2.0%. smc millimete r millimete r ref. min. max. ref. min. max. a 2.75 3.15 e - 0.203 b 6.60 7.11 f 7.75 8.13 c 5.59 6.22 g 0.76 1.27 d 2.00 2.62 h 0.15 0.31
elektronische bauelemente sm5200c voltage 200v 5.0 a schottky barrier rectifiers 01-oct-2010 rev. b page 2 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. ratings and characteristic curves junction capacitance (pf) revise voltage (%) typical junction capacitance 0 200 400 600 800 0.1 1 10 100 tc, case temperature ( j) a verage forward current (a) typical forward current derating curve 0 5 7 20 50 100 150 190 maximum non- repetitive forward surge current number of cycles at 60hz peak forwad surge current (a) 0 40 80 120 160 200 0 10 100 8.3ms single half sine wave jedec method tj=25 j 0.01 0.1 1 10 100 180 40 80 120 220 10 reverse voltage(v) typical reverse characteristic reverse curren t(ua) 25j 50j 125j 75j 100j 0.4 0.1 1 10 100 instantaneous forward current (a) forward voltage (v) typical forward characteristic 0.5 0.6 0.7 0.8 0.9 1.0 25j 125j 75j
|