temperature rating ordering information standard colours operating temperature range: -55 c to +125 c minimum shrink temperature: +70 c minimum full recovery temperature: +90 c inside diameter wall thickness standard package d (min) expanded as supplied d (max) recovered after heating w (nom) recovered after heating spool quantity mm mm mm m ordering description 1.17 0.58 0.30 457 v4- 3 / 64 -0 1.6 0.79 0.30 914 v4- 1 / 16 -0 2.36 1.17 0.30 762 v4- 3 / 32 -0 3.17 1.57 0.30 762 v4- 1 / 8 -0 4.74 2.36 0.33 304 v4- 3 / 16 -0 6.35 3.17 0.36 228 v4- 1 / 4 -0 9.52 4.74 0.36 152 v4 3 / 8 -0 12.7 6.35 0.36 152 v4- 1 / 2 -0 19.05 9.52 0.43 76 v4 3 / 4 -0 25.4 12.7 0.51 76 v4-1-0 the wall thickness of the tubing will be less than specified if recovery is restricted during shrinkage. colour black code 0 d d w very thin wall rapid installation excellent flame retardancy low recovery temperature v4 very flexible, highly flame retarded, heat-shrinkable tubing v4 is a very flexible, highly flame retarded polyolefin heat-shrinkable tubing with a low recovery temperature. it has been designed as a cost-effective, environmentally friendly choice for many commercial applications. v4 tubing will electrically insulate and mechanically protect components, terminals and splices. in particular, it is used in applications where space saving is important. its thin wall allows components to be packed more closely than is possible with standard tubings. v4 tubing can shrink more than twice as fast as standard tubings, therefore reducing installation time and cost. it has a low recovery temperature (+90 c) which may help prevent the overheating of heat-sensitive components.
raychem interconnect cheney manor industrial estate swindon, wiltshire sn2 2qe tel: (44)-1793-528171 fax: (44)-1793-616652 all of the above information, including illustrations, is believed to be reliable. users, however, should independently evaluate the suitability of each product for their application. tyco electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. tyco electronics only obligations are those in the standard terms and conditions of sale for this product and in no case will tyco electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. tyco electronics specifications are subject to change without notice. in addition tyco electronics reserves the right to make changes in materials or processing, without notification to the buyer, which do not affect compliance with any applicable specification. v4 ri0043.1299 raychem and v4 are trademarks of raychem interconnect, a division of tyco electronics corporation. approvals performance specifications ul 224 125 c vw-1 file e35586 csa-oft file 31929 test test method test requirement tensile strength astm d2671 10.3 mpa ultimate elongation astm d2671 200% heat ageing: ul 224 (168h at 158c) tensile strength: ultimate elongation: 70% retention 100% (minimum) copper contact corrosion: astm d2671 (168h at 158c) ultimate elongation: 100% (minimum) dielectric strength: astm d2671 20 mv/m flame retardancy: ul 224 vw-1 for full product performance details consult raychem specification rw 3023. raychem specification rw 3023 material safety data sheet available on request. installation instructions available on request.
|
