View Z80-250_666790.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

high reliability connectors 2mm pitch datamate connectors
1 north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg wire to board connectors tabs & terminals component assembly systems spacers ic packaging loose board sockets global interco manuf from to harwin plc fitzherbert road, farlington, portsmouth, hampshire, po6 1rt, uk tel: (sales) +44 (0) 23 9237 0451 tel: (admin) +44 (0) 23 9231 4545 fax: +44 (0) 23 9231 4590 e-mail: mis@harwin.co.uk harwin inc p.o. box 319, new albany in 47151 usa tel: +1 812 285 0055 fax: +1 812 285 0056 e-mail: mis@harwin.com harwin pte block 71 ayer rajah crescent #04-01/02 ayer rajah industrial estate singapore 0513 tel: +65 779 4909 fax: +65 779 3868 e-mail: mis@harwin.com.sg % % % from conception to connection harwin produce an extensive range of standard items available from stock, but in addition also specialise in custom design. a major part of manufacturing is designed to specific customer requirements starting from original concept through to mass production within a matter of weeks. with over 50 years experience in the industry harwin has grown and developed into a vast number of product fields, showing expertise in stamping, moulding, precision turning, cable assembly and automatic and semiautomatic assembly methods. if you have a special requirement, please contact your nearest harwin office. specifications harwin operate an ongoing development program. this may result in changes to the product specifications shown in this catalogue. dimensions dimensions are in millimetres and are nominal unless otherwise stated. l integarted manufacturing company l quality products to international standards - iso 9001 (no: fm1093) l free of charge samples l extensive distribution network l technical support for the latest product our website: sales, service &
2 north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg high rel connectors board to board connectors surface mount connectors power connectors custom connectors packaging nnect acturers conception connection m22250/2-01 19 m80-003 5 m80-040 8 m80-011 8 m80-013 11 m80-015 9,11 m80-023 9 m80-646 7 m80-647 7 m80-648 7 m80-697 12 m80-700 15 m80-702 15 m80-704 16 m80-705 17 m80-706 18 m80-707 16 m80-708 17 m80-709 18 m80-710 15 m80-712 15 m80-714 16 m80-715 17 m80-716 18 m80-717 16 m80-718 17 m80-719 18 m80-804 6 m80-805 5 m80-812 8 m80-813 8 m80-814 6 m80-815 5 m80-816 8 m80-817 8 m80-866 6 m80-867 5 m80-868 6 m80-869 5 m80-876 6 m80-877 5 m80-878 6 m80-879 5 m80-880 13 m80-887 9 m80-888 11 m80-889 11 m80-891 10 m80-894 10 m80-897 9 m80-898 11 m80-899 11 t5746 19 t5747 19 t5748-19 19 z80-058 19 Z80-250 19 z80-wa22 19 z80-wa22ap 19 z80-kap778-1 19 l special labelling l tool design and manufacture capability l custom design and manufacturing capability l packaging options include tape and reel, radial tape and other special packaging options information bookmark www.harwin.com specification 3 - 4 contents female connectors pc tail 9 flexi-circuit tail 10 crimp tail 11 smt 12 power signal connectors male 15 female 16 female crimp 17 - 18 hoods 13 overmoulded male & female crimp 14 tooling 19 component selector chart 20 - 22 manufacturing part number index male connectors vertical 5 horizontal 6 smt 7 crimp 8
3 2mm pitch datamate specification this catalogue details a range of plug and socket connectors for interconnecting board to board, board to wire and cable to cable in data transmission applications. l available in discrete sizes 2 to 63 ways, 1, 2 or 3 rows. l polarisation prevents mis-mating of connectors. l fully shrouded contacts. l latching, if required. l pc board strain relief. l four leaf beryllium copper contact suitable for high speed data transmission. applications male connectors female vertical horizontal smt crimp vertical p.c. tail crimp tail smt female vertical p.c. tail female crimp m80-898 m80-899 m80-877 m80-879 m80-805 m80-894 m80-897 7.23 8.5 m80-877 m80-879 m80-805 m80-887 m80-891 m80-867 m80-869 m80-815 m80-876 m80-878 m80-804 m80-894 m80-897 m80-866 m80-868 m80-814 m80-714 m80-704 m80-717 m80-707 m80-710 m80-700 m80-717 m80-702 m80-888 m80-889 m80-876 m80-878 m80-804 m80-866 m80-868 m80-814 m80-888 m80-889 m80-898 m80-899 m80-700 m80-710 m80-702 m80-712 m80-867 m80-869 m80-815 9.98 13.1 max. 11.1 max. 10.2 max. 10.2 max. 11.9 max. 10.1 max.* 7.98 m80-705* m80-715 m80-706* m80-716 m80-708* m80-718 m80-709* m80-719 7.23 m80-887 m80-891 north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg applications vertical 3 row applications vertical 3 row 7.43 m80-676 m80-647 m80-648 m80-887 m80-891 10.94 max m80-897 m80-891 m80-812,m80-813 m80-816,m80-817 10.35 max m80-888 m80-889 m80-646 m80-647 m80-648 13.60 max m80-812 m80-813 m80-816 m80-817 m80-888 m80-887 7.50 m80-867 m80-869 m80-815 m80-897 10.25 m80-897 m80-866 m80-868 m80-814 7.70 m80-697 m80-646 m80-647 m80-648 11.10 max m80-812, m80-813 m80-816, m80-817 m80-697
4 2mm pitch datamate specification specification this connector range is designed to conform to the requirements of british standard 9525-f0033 with high reliability contacts for signal transmission without loss of data. to order connectors to the british standard specification see table below. materials housings: glass-filled thermoplastic ul94v-0 female contacts: brass shell, with beryllium copper inner contact. male contacts: phosphor bronze plating finish: female contact gold shell/gold contact tin/lead shell/gold contact (pc tail only) male contacts: gold contact, tin/lead tail electrical current individual contacts: at 25 c 3.3a max (in isolation) at 85 c 2.6a max all contacts simultaneously: at 25 c 3.0a max at 85 c 2.2a max working voltage (at sea level 1013 mbar) 120v d.c. or a.c. peak proof voltage (at sea level 1013 mbar) 360v d.c. or a.c. peak contact resistance (initially) 20 miliohms max. contact resistance (after conditioning) 25 miliohms max. insulation resistance (intially): 1000 megohms min at 500v d.c. insulation resistance (after conditioning): 100 megohms min at 500v d.c. mechanical mechanical endurance: 500 operations engaging and separating force (per contact pair): 2.8n max 0.2n min. contact retention in moulding: 10n min. contact holding force: 0.2n min. crimp barrel accommodation: 22 a.w.g. to 28 a.w.g. bs g 210 type a. (16 a.w.g. to 18 a.w.g. for power contacts). environmental environmental classification: 55/125/56 days at 95% rh vibration severity general: 10hz to 2000hz 0.75mm/ 98mm/s 2 (10g). duration 6h bump severity 390m/s 2 (40g), 4000 10 bumps shock severity: 981m/s 2 (100g) for 6ms acceleration severity: 490m/s 2 (50g) polarising features 1 and 2 row 3 row contact arrangement the first digit indicates number of rows of contacts i.e. 1 - single row, 2 - double row. the second and third digits indicate total number of contacts i.e. 107 - single row seven contact connectors, 220 - double row twenty contact connector. contact gender f - female contact m - male contact termination style n - throughboard solder (straight) short t - throughboard solder (straight) l - throughboard solder (90 ) male only c - crimp 24-28 awg (see clause 8.3 of specification bs9525f0033) female only. d - crimp 22 awg (see clause 8.3 of specification bs9525f0033) female only variant 0 - unlatched connector tin alloy plated pc tail 1 - latch connector (male only) tin alloy plated pc tail 2 - unlatched connector gold flashed termination pc tail 3 - latched connector (male only) gold flashed pc tail x - users special requirement example reference no: b5740-216-f-c-2 order codes b5xxx xxx x x x iiiii style contact contact termination variant number arrangement style style style number b5740 - female connector types c and d b5741 - female connector types n and t b5743 - male connector types l and t harwin datamate to british standard 9525f0033 if certification to bs9525f0033 is required, please use the order codes shown below description of connector, intended application and order codes. multi-contact, two part rectangular connectors, unsealed with parallel and perpendicular mounting for printed boards up to 1.6mm thickness. female connector styles are also available having insertable crimp contacts accommodating wire bs g210 (type a) from 22 to 28 awg. the connector is intended for use as a low voltage connector in high board packing density equipment. all contact faces are gold finish. north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg polarising feature polarising feature
5 2mm pitch no. of ways ab datamate male connectors - vertical pc tail a range of high reliability miniature vertical male connectors, for use with female connectors shown on pages 9-12. by using retaining straps, strain on the pc board soldered joints can be eliminated. l polarised mouldings. l fully shrouded contacts l gold plating on contact area, tin/lead on tails. l choice of friction lock, latched or unlatched connectors. gold/tin gold/tin gold/tin unlatched latched with friction lock no. of ways ab gold/tin gold/tin gold/tin unlatched latched with friction lock single row double row separator tool (for latched connector only). see page 19 for further information. order code t5746 recommended pc board pattern strain relief straps are optional. located at the end of each connector. to order use the following order code (supplied loose). order code m80-0030006 2.0 4.75 hole 0.80 max. 4.75 2.0 2.25 b strain relief strap holes (optional) 0.90 min. pad 1.5 double row single row 3.0 5.6 max. 3.5 max. 0.4 2.0 a max. no. 1 contact b 0.50 friction lock or latch (when fitted) adds 0.5mm to overall length a friction lock or latch (when fitted) adds 0.5mm to overall length a a max. no. 1 contact 5.5 max. 0.4 5.6 max. 3.0 2.0 2.0 0.5 b 2 7.6 2.0 m80-8790222 m80-8770222 m80-8050222 3 9.6 4.0 m80-8790322 m80-8770322 m80-8050322 4 11.6 6.0 m80-8790422 m80-8770422 m80-8050422 5 13.6 8.0 m80-8790522 m80-8770522 m80-8050522 6 15.6 10.0 m80-8790622 m80-8770622 m80-8050622 7 17.6 12.0 m80-8790722 m80-8770722 m80-8050722 17 37.6 32.0 m80-8791722 m80-8771722 m80-8051722 22 47.6 42.0 m80-8792222 m80-8772222 m80-8052222 2+2 7.6 2.0 m80-8690422 m80-8670422 m80-8150422 3+3 9.6 4.0 m80-8690622 m80-8670622 m80-8150622 4+4 11.6 6.0 m80-8690822 m80-8670822 m80-8150822 5+5 13.6 8.0 m80-8691022 m80-8671022 m80-8151022 6+6 15.6 10.0 m80-8691222 m80-8671222 m80-8151222 7+7 17.6 12.0 m80-8691422 m80-8671422 m80-8151422 8+8 19.6 14.0 m80-8691622 m80-8671622 m80-8151622 9+9 21.6 16.0 m80-8691822 m80-8671822 m80-8151822 10+10 23.6 18.0 m80-8692022 m80-8672022 m80-8152022 13+13 29.6 24.0 m80-8692622 m80-8672622 m80-8152622 17+17 37.6 32.0 m80-8693422 m80-8673422 m80-8153422 22+22 47.6 42.0 m80-8694422 m80-8674422 m80-8154422 north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg
6 2mm pitch gold/tin gold/tin gold/tin unlatched latched with friction lock gold/tin gold/tin gold/tin unlatched latched with friction lock no. of ways ab datamate male connectors - horizontal pc tail a range of high reliability miniature horizontal pc tail male connectors, for use with female connectors shown on pages 9-12. by using retaining straps, strain on the pc board soldered joints can be eliminated. l polarised mouldings. l fully shrouded contacts. l gold plating on contact area, tin/lead on tails. l choice of friction lock, latched or unlatched connectors. no. of ways ab single row double row separator tool (for latched connector only) see page 19 for further information order code t5746 recommended pc board pattern strain reliefs are supplied with all horizontal pc tail connectors. there is no need to order separately. straps are located at the end of each connector. 4.75 2.0 hole 0.80 max. 4.75 0.5 2.25 b strain relief strap holes 0.90 min. pad 1.5 0.5 double row single row friction lock or latch (when fitted) adds 0.5mm to overall length ? friction lock or latch (when fitted) adds 0.5mm to overall length ? a max. no. 1 contact b 0.5 2.0 0.4 6.15 max. 3.5 5.5 max. 6.15 max. 2.0 2.0 0.5 a max. b 0.4 no. 1 contact 2 7.6 2.0 m80-8780222 m80-8760222 m80-8040222 3 9.6 4.0 m80-8780322 m80-8760322 m80-8040322 4 11.6 6.0 m80-8780422 m80-8760422 m80-8040422 5 13.6 8.0 m80-8780522 m80-8760522 m80-8040522 6 15.6 10.0 m80-8780622 m80-8760622 m80-8040622 7 17.6 12.0 m80-8780722 m80-8760722 m80-8040722 17 37.6 32.0 m80-8781722 m80-8761722 m80-8041722 22 47.6 42.0 m80-8782222 m80-8762222 m80-8042222 2+2 7.6 2.0 m80-8680422 m80-8660422 m80-8140422 3+3 9.6 4.0 m80-8680622 m80-8660622 m80-8140622 4+4 11.6 6.0 m80-8680822 m80-8660822 m80-8140822 5+5 13.6 8.0 m80-8681022 m80-8661022 m80-8141022 6+6 15.6 10.0 m80-8681222 m80-8661222 m80-8141222 7+7 17.6 12.0 m80-8681422 m80-8661422 m80-8141422 8+8 19.6 14.0 m80-8681622 m80-8661622 m80-8141622 9+9 21.6 16.0 m80-8681822 m80-8661822 m80-8141822 10+10 23.6 18.0 m80-8682022 m80-8662022 m80-8142022 13+13 29.6 24.0 m80-8682622 m80-8662622 m80-8142622 17+17 37.6 32.0 m80-8683422 m80-8663422 m80-8143422 22+22 47.6 42.0 m80-8684422 m80-8664422 m80-8144422 north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg
7 2mm pitch order code tin gold no. of ways ab datamat e su r face mount male connectors - vertical l with pick and place pad. l locating pegs to facilitate location on pcb. l packed in tubes. l for tape and reel options, contact technical sales. 2+ 2 7. 6 2. 0 m80-646040 6 p m80-6460405 p 3+ 3 9. 6 4. 0 m80-646060 6p m80-6460605 p 4+ 4 11. 6 6. 0 m80-646080 6 p m80-6460805 p 5+ 5 13. 6 8. 0 m80-646100 6 p m80-6461005 p 6+ 6 15. 6 10. 0 m80-646120 6 p m80-6461205 p 7+ 7 17. 6 12. 0 m80-646140 6 p m80-6461405 p 8+ 8 19. 6 14. 0 m80-646160 6 p m80-6461605 p 9+ 9 21. 6 16. 0 m80-646180 6 p m80-6461805 p 10+1 0 23. 6 18. 0 m80-646200 6 p m80-6462005 p 13+1 3 29. 6 24. 0 m80-646260 6 p m80-6462605 p 17+1 7 37. 6 32. 0 m80-646340 6 p m80-6463405 p 22+2 2 47. 6 42. 0 m80-646440 6 p m80-6464405 p order code tin gold no. of ways ab 2+ 2 8. 1 2. 0 m80-64704 06 p m80-6470405 p 3+ 3 10. 1 4. 0 m80-647060 6 p m80-6470605 p 4+ 4 12. 1 6. 0 m80-647080 6 p m80-6470805 p 5+ 5 14. 1 8. 0 m80-647100 6 p m80-6471005 p 6+ 6 16. 1 10. 0 m80-647120 6 p m80-6471205 p 7+ 7 18. 1 12. 0 m80-647140 6 p m80-6471405 p 8+ 8 20. 1 14. 0 m80-647160 6 p m80-6471605 p 9+ 9 22. 1 16. 0 m80-647180 6 p m80-6471805 p 10+1 0 24. 1 18. 0 m80-647200 6 p m80-6472005 p 13+1 3 30. 1 24. 0 m80-647260 6 p m80-6472605 p 17+1 7 38. 1 32. 0 m80-647340 6 p m80-6473405 p 22+2 2 48. 1 42. 0 m80-647440 6 p m80-6474405 p order code tin gold no. of ways ab 2+ 2 8. 1 2. 0 m80-648040 6 p m80-6480405 p 3+ 3 10. 1 4. 0 m80-648060 6 p m80-6480605 p 4+ 4 12. 1 6. 0 m80-648080 6 p m80-6480805 p 5+ 5 14. 1 8. 0 m80-648100 6 p m80-6481005 p 6+ 6 16. 1 10. 0 m80-648120 6 p m80-6481205 p 7+ 7 18. 1 12. 0 m80-648140 6 p m80-6481405 p 8+ 8 20. 1 14. 0 m80-648160 6 p m8 0-6481605p 9+ 9 22. 1 16. 0 m80-648180 6 p m 8 0-6481805p 10+1 0 24. 1 18. 0 m80-648200 6 p m80-6482005 p 13+1 3 30. 1 24. 0 m80-648260 6 p m80-6482605 p 17+1 7 38. 1 32. 0 m80-648340 6 p m80-6483405 p 22+2 2 48. 1 42. 0 m80-648440 6 p m80-6484405 p unlatched latched with friction lock recommended pc board pattern north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg a 6 .00 2 .00 b 2 .00 0. 7 0 5 . 7 5 n o . 1 contact 2 .00 b 2 .00 0. 7 0 5 . 7 5 a n o . 1 contact 2 .00 b 0. 7 0 7 5 6 .00 a 2 .00 2 x 1 . 85 2 x 0. 85 - 0. 8 0 2 .00 ?b? 1 . 4 0
8 2mm pitch datamate male crimp connector for cable-to-cable applications l polarised housings. l locking or friction latch for strain relief. l contacts rear insertable (replaceable). l part numbers are for housings and the equivalent number of contacts. l fully shrouded contacts. double row crimp type wire size stranding crimp pull-off force (awg) (mm) tool setting (newtons) small bore 28 7/0.125 6 12.5 small bore 26 19/0.1 6 25.0 small bore 24 7/0.2 6 44.0 large bore 22 19/0.15 6 50.0 wire specification: 22 awg to 28 awg bs 3g 210 type a wire stripping details recommended crimp tool m22520/2-01, positioner t5747, contact insertion/removal tool - Z80-250. see page 19. crimp barrel size 2.0 nominal ? 1.1 max. spare replacement contacts can be obtained separately. please contact technical sales for other size availability. order code m80-0410005 (small bore) m80-0400005 (large bore) small bore, large bore, small bore, with large bore, with latched latched friction lock friction lock no. of ways ab 2+2 8.1 2.0 m80-8120405 m80-8130405 m80-8160405 m80-8170405 4+4 12.1 6.0 m80-8120805 m80-8130805 m80-8160805 m80-8170805 5+5 14.1 8.0 m80-8121005 m80-8131005 m80-8161005 m80-8171005 6+6 16.1 10.0 m80-8121205 m80-8131205 m80-8161205 m80-8171205 north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg a b 2.0 9 .0 m a x 2.0 6 . 1 m a x mates with m80-888 and m80-889. see page 11. for overmoulding, see page 14.
9 2mm pitch recommended pc board pattern double row single row outer shell gold outer shell inner contact tin/lead gold inner contact gold no. of ways ab datamate female connectors - pc tail a range of high reliabilty miniature vertical pc tail female connectors for use with male connectors. l fully shrouded contacts. l polarised mouldings. 2 7.3 2.0 3 9.3 4.0 4 11.3 6.0 5 13.3 8.0 6 15.3 10.0 7 17.3 12.0 17 37.3 32.0 m80-8970305 m80-8970301 m80-8970405 m80-8970401 m80-8970505 m80-8970501 m80-8970605 m80-8970601 m80-8970705 m80-8970701 m80-8971705 m80-8971701 22 47.3 42.0 m80-8972205 m80-8972201 m80-8970205 m80-8970201 no. of ways ab 2+2 7.3 2.0 3+3 9.3 4.0 4+4 11.3 6.0 5+5 13.3 8.0 6+6 15.3 10.0 7+7 17.3 12.0 8+8 19.3 14.0 m80-8870605 m80-8870601 m80-8870805 m80-8870801 m80-8871005 m80-8871001 m80-8871205 m80-8871201 m80-8871405 m80-8871401 m80-8871605 m80-8871601 9+9 21.3 16.0 m80-8871805 m80-8871801 10+10 23.3 18.0 m80-8872005 m80-8872001 13+13 29.3 24.0 m80-8872605 m80-8872601 17+17 37.3 32.0 m80-8873405 m80-8873401 22+22 47.3 42.0 m80-8874405 m80-8874401 m80-8870405 m80-8870401 outer shell gold outer shell inner contact tin/lead gold inner contact gold single row double row dummy contact for additional polarisation (packs of 100). front loading. order code m80-023 b 2.0 pad 1.5 hole 0.80 max 2.0 3.0 5.3 max. 3.1 max. 0.50 5.5 max. a max. b 2.0 2.0 a max. b 2.0 3.0 5.3 max. 3.1 max. 0.50 3.5 max. north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg
10 2mm pitch single row double row recommended pc board pattern double row single row b 2.0 pad 1.5 hole 0.80 max 2.0 outer shell gold outer shell inner contact tin/lead gold inner contact gold no. of ways ab no. of ways ab outer shell gold outer shell inner contact tin/lead gold inner contact gold datamate female connectors - flexi-circuit tail a range of high reliabilty miniature female connectors suitable for flexi-circuit applications. l 1.3mm pc tail length. l fully shrouded contacts. l polarised mouldings. l choice of plating finishes. 2 7.2 2.0 m80-8940205 m80-8940201 3 9.2 4.0 m80-8940305 m80-8940301 4 11.2 6.0 m80-8940405 m80-8940401 5 13.2 8.0 m80-8940505 m80-8940501 6 15.2 10.0 m80-8940605 m80-8940601 7 17.2 12.0 m80-8940705 m80-8940701 17 37.2 32.0 m80-8941705 m80-8941701 22 47.2 42.0 m80-8942205 m80-8942201 2+2 7.2 2.0 m80-8910405 m80-8910401 3+3 9.2 4.0 m80-8910605 m80-8910601 4+4 11.2 6.0 m80-8910805 m80-8910801 5+5 13.2 8.0 m80-8911005 m80-8911001 6+6 15.2 10.0 m80-8911205 m80-8911201 7+7 17.2 12.0 m80-8911405 m80-8911401 8+8 19.2 14.0 m80-8911605 m80-8911601 9+9 21.2 16.0 m80-8911805 m80-8911801 10+10 23.2 18.0 m80-8912005 m80-8912001 13+13 29.2 24.0 m80-8912605 m80-8912601 17+17 37.2 32.0 m80-8913405 m80-8913401 22+22 47.2 42.0 m80-8914405 m80-8914401 north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg 5 . 5 3 . 1 1 . 3 0 .5 2 . 0 2 . 0 a b 5 . 2 2 . 0 a b 3 . 1 0 . 5 1 . 3 5 . 2 3 . 5
11 2mm pitch dummy contact for additional polarisation (packs of 100). crimp type wire size stranding crimp pull-off force (awg) (mm) tool setting (newtons) small bore 28 7/0.125 6 12.5 small bore 26 19/0.1 6 25.0 small bore 24 7/0.2 6 44.0 large bore 22 19/0.15 6 50.0 datamate female connectors - crimp tail a range of high reliabilty miniature female connectors for use with male connectors. l polarised mouldings. l fully shrouded contacts. l part numbers are for housings and the equivalent number of contacts. l contacts are rear insertable. large bore small bore crimp crimp gold gold no. of ways ab no. of ways ab large bore small bore crimp crimp gold gold single row double row wire stripping details recommended crimp tool m22520/2-01, positioner t5747, contact insertion tool - t5748-19. see page 19. crimp barrel size 7.65 max. a max. b 2.0 2.0 5.45 max. 3.5 max. 7.65 max. a max. b 2.0 2.0 nominal ? 1.1 max. order code m80-023 spare contact for replacement can be obtained separately. order code m80-0130005 (small bore) m80-0110005 (large bore) 2 7.3 2.0 m80-8990205 m80-8980205 3 9.3 4.0 m80-8990305 m80-8980305 4 11.3 6.0 m80-8990405 m80-8980405 5 13.3 8.0 m80-8990505 m80-8980505 6 15.3 10.0 m80-8990605 m80-8980605 7 17.3 12.0 m80-8990705 m80-8980705 17 37.3 32.0 m80-8991705 m80-8981705 2+2 7.3 2.0 m80-8890405 m80-8880405 3+3 9.3 4.0 m80-8890605 m80-8880605 4+4 11.3 6.0 m80-8890805 m80-8880805 5+5 13.3 8.0 m80-8891005 m80-8881005 6+6 15.3 10.0 m80-8891205 m80-8881205 7+7 17.3 12.0 m80-8891405 m80-8881405 8+8 19.3 14.0 m80-8891605 m80-8881605 9+9 21.3 16.0 m80-8891805 m80-8881805 10+10 23.3 18.0 m80-8892005 m80-8882005 13+13 29.3 24.0 m80-8892605 m80-8882605 17+17 37.3 32.0 m80-8893405 m80-8883405 north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg
12 2mm pitch unlatched order code tin gold no. of ways ab datamate surface mount female connectors l with pick and place pad. l locating pegs to facilitate location on pcb. l packed in tubes. l contact technical sales for tape and reel packaging. 2+ 2 7. 3 2. 0 m80-697040 6 p m80-6970405 p 3+ 3 9. 3 4. 0 m80-697060 6 p m80-6970605 p 4+ 4 11. 3 6. 0 m80-697080 6 p m80-6970805 p 5+ 5 13. 3 8. 0 m80-697100 6 p m80-6971005 p 6+ 6 15. 3 10. 0 m80-697120 6 p m80-6971205 p 7+ 7 17. 3 12. 0 m80-697140 6 p m80-6971405 p 8+ 8 19. 3 14. 0 m80-697160 6 p m80-6971605 p 9+ 9 21. 3 16. 0 m80-697180 6 p m80-6971805 p 10+1 0 23. 3 18. 0 m80-697200 6 p m80-697200 5 p 13+1 3 29. 3 24. 0 m80-697260 6 p m80-6972605 p 17+1 7 37. 3 32. 0 m80-697340 6 p m80-6973405 p 22+2 2 47. 3 42. 0 m80-697440 6 p m80-6974405 p recommended pc board pattern north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg 2 x 2 x 0.85-0.80 ?b? 1 . 6 2 .0 2 .0 4 .0 2 .5 m i n ho l es re q uire d f or use w i t h l atc h e d ma l e c o nn e ct ors 0 . 7 5 . 3 5 . 5 2 . 0 a
17 2mm pitch datamate hoods this range is for use with the datamate crimp connectors m80-888 and m80-889 series (see page 11) to give cable strain relief . they can be used with unlatched connectors only. size dim l 5+5 17.0 6+6 7+7 21.0 8+8 23.0 9+9 24.0 10+10 26.0 13+13 33.0 19.0 m80-8801298 m80-8801498 m80-8801698 m80-8801898 m80-8802098 m80-8802698 17+17 41.0 m80-8803498 m80-8801098 order code l sizes 10, 12, 14, 16, 18, 20, 26 and 34 ways. l top entry moulding,with internal strain relief. l supplied as a kit parts, including screws. l hoods available for large diameter multi-core shielded cable up to 5.6mm. l 20.0 6.5 north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg
14 2mm pitch north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg a 7.5 b 8.5 b 8.5 a 7.5 datamate overmoulded male and female crimp harwin can provide datamate crimp connectors fully assembled with cabling incoporating our new overmoulding capabilities. overmoulding provides additional strain relief and seals the rear face of the crimp housing, whilst assisting with connector engagement and disengagement. overmoulding is available for sil/dil female and dil male datamate crimp connectors. please contact harwin with your requirement for a quotation. order code no. of ways ab 2 6.0 20.8 3 8.0 20.8 4 8.0 20.8 please 5 12.0 20.8 contact 6 14.0 20.8 technical 7 16.0 20.8 sales 17 36.0 28.8 female - single row order code no. of ways ab 2+2 12.25 22.0 please 4+4 12.25 22.0 contact 5+5 12.25 22.0 technical 6+6 12.25 22.0 sales male - double row order code no. of ways ab 2+2 6.0 20.8 3+3 8.0 20.8 4+4 10.0 20.8 please 5+5 12.0 20.8 6+6 14.0 20.8 contact 7+7 16.0 20.8 8+8 18.0 23.8 technical 9+9 20.0 23.8 10+10 22.0 23.8 sales 13+13 28.0 25.8 17+17 36.0 28.8 female - double row 5.5 8.5 17 way only 5.5 a 6.5 b
13 2mm pitch without with jackscrews jackscrews gold/tin gold/tin no. of ways abc datamate power signal connectors male pc tail a range of high reliability miniature male connectors. l fully shrouded contacts, standard and high power. l with or without jackscrews. l polarised mouldings. l 10a power contacts. l full specifications on page 3. l for horizontal 3 row, please contact technical sales. 27 31.1 25.0 16.0 36 37.1 31.0 22.0 45 43.1 37.0 28.0 51 47.1 41.0 32.0 63 55.1 49.0 40.0 m80-7023622 m80-7003622 m80-7024522 m80-7004522 m80-7025122 m80-7005122 m80-7026322 m80-7006322 m80-7022722 m80-7002722 male vertical pc tail without with jackscrews jackscrews gold/tin gold/tin no. of ways abc 6+2 31.1 25.0 2.0 15+2 37.1 31.0 8.0 24+2 43.1 37.0 14.0 30+2 47.1 41.0 18.0 42+2 55.1 47.0 26.0 m80-7121522 m80-7101522 m80-7122422 m80-7102422 m80-7123022 m80-7103022 m80-7124222 m80-7104222 m80-7120622 m80-7100622 male vertical pc tail with power contacts hole 0.8 max hole 1.3 max hole 3.8 requested when jackscrews are fitted. otherwise optional to suit fixing chosen 4.5 c 6.0 4.0 b 2.0 2.0 recommended pc board pattern recommended pc board pattern a b c 4.5 2.0 2.0 3.0 0.5 m2.5 thread 4.1 jackscrew + nut (when fitted) 5.7 5.8 6.2 9.1 no.1 contact 3.0 m2.5 thread 0.5 1.0 4.1 5.7 5.8 6.2 jackscrew + nut (when fitted) no.1 contact 2.0 2.0 4.5 c 6.0 4.0 a b 9.1 4.5 c b 2.0 2.0 hole 3.8 required when jacksrews are fitted. otherwise optional to suit fixing chosen to operate jackscrews, use a 2mm across flat hexagon key. operate each jackscrew alternately 1.5 turns each end, until fully mated or unmated. north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg
14 2mm pitch datamate power signal connectors female pc tail a range of high reliability miniature female connectors. l fully shrouded contacts, standard and high power. l with or without jackscrews. l polarised mouldings. l 10a power contacts. l full specifications on page 3. l full horizontal 3 row, please contact technical sales. without with jackscrews jackscrews gold gold no. of ways abc 27 31.1 25.0 16.0 36 37.1 31.0 22.0 45 43.1 37.0 28.0 51 47.1 41.0 32.0 63 55.1 49.0 40.0 m80-7073605 m80-7043605 m80-7074505 m80-7044505 m80-7075105 m80-7045105 m80-7076305 m80-7046305 m80-7072705 m80-7042705 female vertical pc tail without with jackscrews jackscrews gold gold no. of ways abc 6+2 31.1 25.0 2.0 15+2 37.1 31.0 8.0 24+2 43.1 37.0 14.0 30+2 47.1 41.0 18.0 42+2 55.1 47.0 26.0 m80-7171505 m80-7141505 m80-7172405 m80-7142405 m80-7173005 m80-7143005 m80-7174205 m80-7144205 m80-7170605 m80-7140605 female vertical pc tail with power contacts to operate jackscrews, use a 2mm across flat hexagon key. operate each jackscrew alternately 1.5 turns each end, until fully mated or unmated. a b 4.5 c 6.0 4.0 8.5 2.0 2.0 6.2 9.4 2.5 2.0 jackscrew + nut (when fitted) no.1 contact 3.0 4.5 c b 2.0 2.0 hole 4.7 required to clear jacksrews when fitted. otherwise optional to suit fixing chosen hole 0.8 max recommended pc board pattern recommended pc board pattern 4.5 c b 6.0 4.0 2.0 2.0 hole 0.8 max hole 1.3 max hole 4.7 required to clear jacksrews when fitted. otherwise optional to suit fixing chosen a b c 4.5 2.0 2.0 8.5 2.5 2.0 6.2 3.0 jackscrew + nut (when fitted) no.1 contact north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg
15 2mm pitch without with jackscrews jackscrews gold gold no. of ways abc datamate power signal connectors female crimp a range of high reliability miniature male and female connectors. l fully shrouded contacts, standard and high power. l with or without jackscrews. l polarised mouldings. l 10a power contacts. l full specifications on page 3. 27 31.1 25.0 16.0 36 37.1 31.0 22.0 45 43.1 37.0 28.0 51 47.1 41.0 32.0 63 55.1 49.0 40.0 m80-7083605 m80-7053605 m80-7084505 m80-7054505 m80-7085105 m80-7055105 m80-7086305 m80-7056305 m80-7082705 m80-7052705 crimp tail small bore without with jackscrews jackscrews gold/tin gold no. of ways abc 6+2 31.1 25.0 2.0 15+2 37.1 31.0 8.0 24+2 43.1 37.0 14.0 30+2 47.1 41.0 18.0 42+2 55.1 49.0 26.0 m80-7181505 m80-7151505 m80-7182405 m80-7152405 m80-7183005 m80-7153005 m80-7184205 m80-7154205 m80-7180605 m80-7150605 crimp tail small bore with power contacts a b c 4.5 2.0 2.0 8.5 9.4 2.5 2.0 6.2 jackscrew when fitted potting wall no. 1 contact crimp type wire size stranding crimp pull-off (awg) (mm) tool setting force (newtons) small bore 28 7/0.125 6 12.5 small bore 26 19/0.1 6 25.0 small bore 24 7/0.2 6 44.0 large bore 22 19/0.15 6 50.0 power crimp 20 19/0.2 8 85.0 power crimp 18 19/0.26 8 140.0 recommended crimp tool m22520/2-01, positioner t5747, contact insertion tool - t5748-19. see page 19. crimp barrel accommodation wire stripping details 2.0 nominal ? 1.1 max. a b 4.5 c 6.0 4.0 8.5 2.0 2.0 potting wall no. 1 contact 6.2 9.4 2.5 2.0 jackscrew when fitted north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg
16 2mm pitch datamate power signal connectors female crimp a range of high reliability miniature male and female connectors. l fully shrouded contacts, standard and high power. l with or without jackscrews. l polarised mouldings. l 10a power contacts. l full specifications on page 3. crimp type wire size stranding crimp pull-off (awg) (mm) tool setting force (newtons) small bore 28 7/0.125 6 12.5 small bore 26 19/0.1 6 25.0 small bore 24 7/0.2 6 44.0 large bore 22 19/0.15 6 50.0 power crimp 20 19/0.2 8 85.0 power crimp 18 19/0.26 8 140.0 crimp barrel accommodation recommended crimp tool m22520/2-01, positioner t5747, contact insertion tool - t5748-19. see page 19. wire stripping details 2.0 nominal ? 1.1 max. without with jackscrews jackscrews gold gold no. of ways abc 27 31.1 25.0 16.0 36 37.1 31.0 22.0 45 43.1 37.0 28.0 51 47.1 41.0 32.0 63 55.1 49.0 40.0 m80-7093605 m80-7063605 m80-7094505 m80-7064505 m80-7095105 m80-7065105 m80-7096305 m80-7066305 m80-7092705 m80-7062705 crimp tail large bore without with jackscrews jackscrews gold gold no. of ways abc 6+2 31.1 25.0 2.0 15+2 37.1 31.0 8.0 24+2 43.1 37.0 14.0 30+2 47.1 41.0 18.0 42+2 55.1 47.0 26.0 m80-7191505 m80-7161505 m80-7192405 m80-7162405 m80-7193005 m80-7163005 m80-7194205 m80-7164205 m80-7190605 m80-7160605 crimp tail large bore with power contacts a b c 4.5 2.0 2.0 8.5 9.4 2.5 2.0 6.2 potting wall no. 1 contact jackscrew when fitted a b 4.5 c 6.0 4.0 8.5 2.0 2.0 potting wall no. 1 contact 6.2 9.4 2.5 2.0 jackscrew when fitted north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg
19 2mm pitch datamate tooling standard circular crimp tool bs5210-3a-300 and mil specification m22520/2-01. precision tool with ratchet mechanism and 8-indent form. must be used with positioner opposite. instruction sheet available. pneumatically operated crimp machine used with hand crimp tool shown opposite. for inserting crimped socket contacts into the rear of mouldings. instruction sheet available. hand crimp tool insertion/removal tool positioner separator tool pneumatic datamate crimp machine order code m22520/2-01 order code t5748-19 (complete with tool bits) Z80-250 (male crimp contacts only) order code crimp machine z80-wa22ap order code positioner z80-kap778-1 order code t5747 (small and large bore crimp) order code z80-058 (power crimp) order code t5746 l typical crimp rate is 600 per hour. l meets the requirements of bs5210-3a-300 and mil m22520/2-01. l instruction sheet available. recommended for unplugging latched connectors (tool releases the latches prior to disengagement). can also be used with unlatched and friction lock connectors. suitable for all sizes. north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg
20 2mm pitch selector chart pitch series features product style board to board - through board through board 1.27mm m50 connectors l polarised with locating pegs. l shrouded contacts on pin headers. l single and double row. l vertical and horizontal styles. 2.00mm m22 connectors l high reliability connectors with four finger beryllium copper contacts. l one, two and three row styles. 2.00mm m80 connectors datamate l single and double row. l up to 36 ways. l vertical and horizontal styles. 2.54mm 025 connectors 4.20mm kf connectors pitch series features product style board to board - surface mount 0.5mm f05 connectors 0.8mm m60 connectors 1.0mm m40 connectors 1.0mm f10 connectors l variable stacking height of between 5mm-9mm. l locating pegs. l zero insertion force. l actuator cover. l 4.3mm stacking height. l available with or without tape. l locating pegs. l compact. l zero insertion force. l surface mount. 1.25mm m30 connectors l smt or through hole plug. l plug latches onto housing. l metal solder down tabs. north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg the charts on the next three pages details other product ranges available from harwin. l current rating up to 9 amperes per circuit. l compatible with existing standards. l natural or black mouldings. l fully shrouded with plastic locking. l secure polarisation of male and female connectors.
21 2mm pitch selector chart 1.27mm m50 connectors 2.00mm m22 connectors 2.00mm m80 connectors datamate l polarised with locating pegs. l shrouded contacts. l with or without pick and place pad. l low profile design socket. l 4 to 44 positions double row. l pick and place pad for automatic placement. l optional latched provides additional strain relief. 2.54mm 025 connectors l single and double row. l with or without pick and place pad. pitch series features product style wire to board 1.25mm m30 connectors l smt or through hole plug. l plug latches onto housing. l metal solder down tabs. l single and double row. l polarising optional. l twin leaf contacts. l one, two and three row styles. l high reliability connectors with four finger beryllium copper contacts. 2.00mm 2.00mm m22 connectors datamate l single and double row. l polarising optional. l tapered entry for pin insertion l latched pin headers. 2.54mm 025 connectors l current rating up to 9 amperes per circuit. l compatible with existing standards. l natural or black mouldings. l fully shrouded with plastic locking. 4.20mm kf connectors pitch series features product style board to board - surface mount (continued) north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg
22 2mm pitch pitch series features product style flexi to board 1.00mm f10 connectors l compact. l zero insertion force. l surface mount. 0.5mm f05 connectors l zero insertion force. l actuator cover. l surface mount design. l low insertion force. l vertical and horizontal. 1.25mm f25 connectors l low insertion force. l vertical and horizontal. 2.54mm f20 connections selector chart range features product style sockets pcb sockets l for pins, ?0.5, ?0.6, ?0.8, ?1.0 and ?2.00mm l high reliability four finger contact. l available with rtv sealing. l available loose or reeled. l ic socketsChigh reliability four finger contact. l choice of styles. l choice of finishes. sockets range features product style hardware spacers l clearance and threaded. l metric and imperial sizes. l hexagonal and circular. l plastic and metal. l 0.635mm square terminal pins. l 1mm terminals. l pcb spade terminals. l terminal blocks. l insulated plugs. l uninsulated plugs. terminals probes l head styles for various applications. l different travels for specific applications. l wide range of sizes from 0.82 to 4.20 mm centres. north/south america tel: +1 812 285 0055 e-mail: mis@harwin.com europe/middle east tel: +44 (0) 23 9237 0451 e-mail: mis@harwin.co.uk asia/pacific tel: +65 779 4909 e-mail: mis@harwin.com.sg new pic to come
component assembly catalogue high speed systems for inserting sockets, tabs, pins and other oddform components into printed circuit boards, bobbins and housings. also available on cd rom . cd catalogue if you prefer electronic media, then we have our full line catalogue available on cd rom. it contains technical data, specifications and catalogue pages in pdf format. plus details of distributors, new products and other useful information. web site bookmark harwin.com for the latest new product releases, distributor listings, product information and other useful information. you will find an extensive searchable database of our products including technical drawings, specifications and catalogue pages in pdf format. harwin inc p.o. box 319 new albany in 47151 usa tel: +1 812 285 0055 fax: +1 812 285 0056 e-mail: mis@harwin.com harwin plc fitzherbert road farlington, portsmouth hants po6 1rt uk tel: (sales) +44 (0) 23 9237 0451 fax: +44 (0) 23 9231 4590 e-mail: mis@harwin.co.uk harwin pte block 71 ayer rajah crescent #04-01/02 ayer rajah ind. est. singapore 0513 tel: (sales) +65 779 4909 fax: +65 779 3868 e-mail: mis@harwin.com.sg visit our website: http://www.harwin.com catalogue no: 01-2401 telephone calls direct onto our sales desk for immediate response. technical engineers on-hand to advise you on your problem. ship-to-stock or ship-to-line with qualified accounts. iso 9001 approval certificate no. fm10993. integrated cad drawing facility for quick response to your queries. customised labels for your own production. selective electroplating can be offered from our own plating facility. free of charge samples on standard products. customer services harwin literature

▲Up To Search▲

Price & Availability of Z80-250

	To Download Z80-250 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .