original creation date: 12/03/98 last update date: 02/03/99 last major revision date: 12/03/98 mn54act3301-x rev 0a0 microcircuit data sheet crystal clock generator general description this device is a crystal controlled cmos oscillator requiring a minimum of external components. it provides selectable output divide ratio (and selectable crystal drive level). the circuit is designed to operate over a wide frequency range using fundamental model or overtone crystals. ns part numbers 54ACT3301W-QML industry part number 54act3301 prime die j3301 controlling document 5962-98621 processing mil-std-883, method 5004 quality conformance inspection mil-std-883, method 5005 subgrp description temp ( c) o 1 static tests at +25 c 2 static tests at +125 c 3 static tests at -55 c 4 dynamic tests at +25 c 5 dynamic tests at +125 c 6 dynamic tests at -55 c 7 functional tests at +25 c 8a functional tests at +125 c 8b functional tests at -55 c 9 switching tests at +25 c 10 switching tests at +125 c 11 switching tests at -55 c 1
microcircuit data sheet mn54act3301-x rev 0a0 features - programmable oscillator drive - output current drive of 48 ma for iol/ioh - fact cmos output levels - output has a high speed short circuit protection - basic oscillator type: pierce - hysteresis inputs to improve noise margin 2
microcircuit data sheet mn54act3301-x rev 0a0 (absolute maximum ratings) (note 1) supply voltage (vcc) -0.5v to +7.0v dc input diode current (iik) +9 ma dc input voltage (vi) -0.5v to vcc +7.0v dc output voltage (vo) -0.5v to vcc +0.5v dc output source or sink current (io) +70 ma storage temperature (tstg) -65 c to +150 c junction temperature (tj) 175 c note 1: absolute maximum ratings are those values beyond which damage to the device may occur. the databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. national does not recommend operation of fact tm circuits outside databook specifications. recommended operating conditions supply voltage (vcc) 4.5v to 5.5v input voltage (vi) 0v to vcc output voltage (vo) 0v to vcc operating temperture (ta) -55 c to +125 c minimum high-level input voltage (vih) 2.0v oeh, oel @ vcc=4.5v to 5.5v 3.15v diva @ vcc=4.5v 3.85v @ vcc=5.5v 4.05v divb, osc_dr @ vcc=4.5v 4.95v @ vcc=5.5v mininum low-level input voltage (vil) 0.8v oeh, oel @ vcc=4.5v to 5.5v 1.35v diva @ vcc=4.5v 1.65v @ vcc=5.5v 0.45v divb, osc_dr @ vcc=4.5v 0.55v @ vcc=5.5v minimum 1/2 level input voltage (v_1/2) 1.8v divb, osc_dr @ vcc=4.5v 2.2v @ vcc=5.5v maximum 1/2 level input voltage (v_1/2) 2.7v divb, osc_dr @ vcc=4.5v 3.3v @vcc=5.5v 3
mn54act3301-x rev 0a0 microcircuit data sheet electrical characteristics dc parameters (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp. range: -55c to 125c. symbol parameter conditions notes pin- name min max unit sub- groups iih1 high level input current vcc=5.5v, vm=5.5v 1, 2 diva, divb, osc_dr) 200 380 ua 1, 2, 3 iih2 high level input current vcc=5.5v, vm=5.5v 1, 2 oel 85 175 ua 1, 2, 3 iih3 high level input current vcc=5.5v, vm=5.5v 1, 2 oeh 6.0 ua 1, 2, 3 iih4 high level input current vcc=5.5v, vm=5.5v 1, 2 osc_in 20 125 ua 1, 2, 3 iil1 low level input current vcc=5.5v, vm=0.0v 1, 2 divb, osc_dr -200 -380 ua 1, 2, 3 iil2 low level input current vcc=5.5v, vm=0.0v 1, 2 oeh -85 -175 ua 1, 2, 3 iil3 low level input current vcc=5.5v, vm=0.0v 1, 2 diva, oel -6.0 ua 1, 2, 3 iil4 low level input current vcc=5.5v, vm=0.0v 1, 2 osc_in -20 -125 ua 1, 2, 3 vol1 low level output voltage vcc=4.5v, iol=50ua 1, 2 out .10 v 1, 2, 3 vcc=5.5v, iol=50ua 1, 2 out .10 v 1, 2, 3 vcc=4.5v, iol=48ma 1, 2 out 0.44 v 1, 2, 3 vcc=5.5v, iol=48ma 1, 2 out 0.44 v 1, 2, 3 viol dynamic output current low vcc=5.5v, iol=75.0ma 1, 2, 5 out 1.65 v 1, 2, 3 voh1 high level output voltage vcc=4.5v, ioh=-50.0ua 1, 2 out 4.40 v 1, 2, 3 vcc=5.5v, ioh=-50.0ua 1, 2 out 5.40 v 1, 2, 3 vcc=4.5v, ioh=-48.0ma 1, 2 out 3.76 v 1, 2, 3 vcc=5.5v, ioh=-48.0ma 1, 2 out 4.76 v 1, 2, 3 vioh dynamic output current high vcc=5.5v, ioh=-75.0ma 1, 2, 5 out 3.85 v 1, 2, 3 4
mn54act3301-x rev 0a0 microcircuit data sheet electrical characteristics dc parameters(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp. range: -55c to 125c. symbol parameter conditions notes pin- name min max unit sub- groups vol2 low level output voltage vcc=4.5v, iol=150ua 1, 2 osc_out 0.74 v 1, 2, 3 vcc=5.5v, iol=150ua 1, 2 osc_out 0.74 v 1, 2, 3 vcc=4.5v, iol=600 ua 1, 2 osc_out 0.74 v 1, 2, 3 vcc=5.5v, iol=600 ua 1, 2 osc_out 0.74 v 1, 2, 3 vcc=4.5v, iol=1.0 ma 1, 2 osc_out 0.74 v 1, 2, 3 vcc=5.5v, iol=1.0 ma 1, 2 osc_out 0.74 v 1, 2, 3 voh2 high level output voltage vcc=4.5v, ioh=-150ua 1, 2 osc_out 3.46 v 1, 2, 3 vcc=5.5v, ioh=-150ua 1, 2 osc_out 4.46 v 1, 2, 3 vcc=4.5v, ioh=-600ua 1, 2 osc_out 3.46 v 1, 2, 3 vcc=5.5v, ioh=-600ua 1, 2 osc_out 4.46 v 1, 2, 3 vcc=4.5v, ioh=-1.0ma 1, 2 osc_out 3.46 v 1, 2, 3 vcc=5.5v, ioh=-1.0ma 1, 2 osc_out 4.46 v 1, 2, 3 iozh maximum tri-state vcc=4.5v, vm=4.5v 1, 2 out 5.0 ua 1, 2, 3 vcc=5.5v, vm=5.5v 1, 2 out 5.0 ua 1, 2, 3 iozl maximum tri-state vcc=4.5v, vm=0.0v 1, 2 out -150 ua 1, 2, 3 vcc=5.5v, vm=0.0v 1, 2 out -180 ua 1, 2, 3 icch supply current outputs high vcc=5.5v 1, 2 vcc 45.0 ua 1, 2, 3 iccl supply current outputs low vcc=5.5v 1, 2 vcc 240 ua 1, 2, 3 iccz supply current outputs tri-state vcc=5.5v 1, 2 vcc 45.0 ua 1, 2, 3 icct supply current per input vcc=5.5v, viht=vcc-2.1v 1, 2 vcc 1.5 ma 1, 2, 3 5
mn54act3301-x rev 0a0 microcircuit data sheet electrical characteristics dc parameters(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp. range: -55c to 125c. symbol parameter conditions notes pin- name min max unit sub- groups icc3l supply current per input vcc=5.5v, 1, 2 vcc 1.5 ma 1, 2, 3 iccq6 supply current for low drive oscillator vcc=4.5v 1, 2 vcc 0.6 ma 1, 2, 3 iccq5 supply current for low drive oscillator vcc=5.5v 1, 2 vcc 6.5 ma 1, 2, 3 iccq4 supply current for medium drive oscillator vcc=4.5v 1, 2 vcc 1.7 ma 1, 2, 3 iccq3 supply current for medium drive oscillator vcc=5.5v 1, 2 vcc 12.4 ma 1, 2, 3 iccq2 supply current for high drive oscillator vcc=4.5v 1, 2 vcc 5.5 ma 1, 2, 3 iccq1 supply current for high drive oscillator vcc=5.5v 1, 2 vcc 31.5 ma 1, 2, 3 vikl negative input clamp voltage vcc=4.5v, vm=-9.0ma 1, 2 input -1.2 v 1, 2, 3 vikh positive input clamp voltage vcc=4.5v, vm=9.0ma 1, 2 input 5.7 v 1, 2, 3 ac parameters (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, trise/tfall=3.0ns, temp range: -55c to 125c. tpzh output enable vcc=4.5v 3, 4, 7 oe to out 1.0 31.5 ns 9, 10, 11 tpzl output enable vcc=4.5v 3, 4, 7 oe to out 1.0 28.0 ns 9, 10, 11 tphz output disable vcc=4.5v 3, 4, 7 oe to out 1.0 21.5 ns 9, 10, 11 tplz output disable vcc=4.5v 3, 4, 7 oe to out 1.0 16.0 ns 9, 10, 11 note 1: screen tested 100% on each device at +25c, +125c, & -55c temperature, subgroups 1, 2, 3, 7, & 8. note 2: sample tested (method 5005, table 1) on each mfg. lot at +25c, +125c, & -55c temperature, subgroups a1, 2, 3, 7, & 8. note 3: screen tested 100% on each device at +25c temperature only, subgroup a9. note 4: sample tested (method 5005, table 1) on each mfg. lot at +25c, +125c, & -55c temperature, subgroups a9, 10, & 11. note 5: transmission line driving test, guardband limits set for +25c, 2 msec duration max. note 6: guaranteed but not tested (design characterization data). note 7: +25c & +125c min limits guaranteed for 5.5v by guardbanding 4.5v minimum limits. 6
microcircuit data sheet mn54act3301-x rev 0a0 revision history rev ecn # rel date originator changes 0a0 m0003234 02/03/99 linda collins initial mds release 7
|
