View LPV-35-36_952933.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

35W Single Output Switching Power Supply
Features :
Constant voltage design Universal AC input / Full range
L P V- 3 5
series
Epoxy encapsulated with IP67 level Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage Fully isolated plastic case Cooling by free air convection UL1310 Class 2 power unit, pass LPS 100% full load burn-in test Low cost, high reliability Suitable for LED lighting and moving sign applications 2 years warranty
LPV-35-5 DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(max.) LEAKAGE CURRENT OVER CURRENT PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE
Note.4
SPECIFICATION
MODEL LPV-35-12 12V 3A 0 ~ 3A 36W 120mVp-p 5.0% 2.0% 5V 5A 0 ~ 6A (Note.7) 30W 6.0% 1.0% 4.0%
Note.6 500ms, 20ms / 230VAC
LPS IP67
LPV-35-24 24V 1.5A 0 ~ 1.5A 36W 150mVp-p LPV-35-36 36V 1A 0 ~ 1A 36W 150mVp-p
LPV-35-15 15V 2.4A 0 ~ 2.4A 36W 120mVp-p
RIPPLE & NOISE (max.) Note.2 80mVp-p
500ms, 20ms / 115VAC at full load
50ms/230VAC 90 ~ 264VAC 47 ~ 63Hz 77%
16ms/115VAC at full load
84%
84%
85%
85%
1.1A/115VAC 0.7A/230VAC COLD STAR 30A/115VAC 60A/230VAC 0.25mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +75 -40 ~ +80 (Refer to output load derating curve) , 10 ~ 95% RH 20 ~ 90% RH non-condensing 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes Design refer to UL1310 Class 2,TUV EN60950-1, CAN/CSA C22.2 No. 223-M91, EN61347-2-13, IP67 approved I/P-O/P:3KVAC 41.4 ~ 48.6V
SAFETY & ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING
NOTE
Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A 743.5Khrs min. MIL-HDBK-217F (25 ) 148*40*30mm (L*W*H) 0.34Kg; 40pcs/14.6Kg/0.63CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the derating curve for more details. 5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. LPV-35-5 can provide 6A of output current continuously. Based on the requirement of UL1310 class 2, the output current is only certified up to 5A for the test report of LPV-35-5.
File Name:LPV-35-SPEC 2008-10-21
35W Single Output Switching Power Supply
Mechanical Specification
L P V- 3 5
Case No.975A
series
Unit:mm
600 18AWG
148 3.5
600
40
AC/L(Brown) AC/N(Blue)
3.5
3.6
3.5
16AWG
3.6
3.5
+V(Red) -V(Black)
Block Diagram
fosc : 65KHz
I/P
EMI FILTER & RECTIFIERS
POWER SWITCHING
RECTIFIERS & FILTER
+V -V
O.L.P.
PWM CONTROL
DETECTION CIRCUIT
O.V.P.
Derating Curve
Static Characteristics
Ta=25
100
100
Others
90
80
80
60
5V
70
LOAD (%)
40
LOAD (%)
60 50 40
20
-30
0
15
30
40
50
60
70 75
80 (HORIZONTAL)
90
100
125
135
145
155 165
175
180
200
230
264
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (V) 60Hz
File Name:LPV-35-SPEC 2008-10-21
30

▲Up To Search▲

Price & Availability of LPV-35-36

	To Download LPV-35-36 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .