View GATOA0SP8I1R0_537029.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 1 / 21
Thin-Film-Transistor LCD Module With Touch Panel Model: GATOA0SP8I1R0
Acceptance
Solomon Goldentek Display Corp. 168,Fu Xiang Blvd,Di Yong Industrial Zone, Gao Bu,Dong Guan,Guang Dong 523273,China FAX: +86-769-8873-7947
Approved and Checked by
Approved by
Checked by
Made by
Product Specification Rev. No. A Rev. A Date 2008/11/21 Contents Preliminary Specification
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08 Written Sun Jin
Page. 2 / 21
Approved
Special Notes Note1. Note2. Note3. Note4. Note5.
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 3 / 21
Contents
General Description and Features....................................................................... 4 1.1 Features ................................................................................................... 4 1.2 General Specification................................................................................ 4 2 Mechanical Information ....................................................................................... 5 3 Absolute Maximum Ratings................................................................................. 6 3.1 Electrical Absolute Rating......................................................................... 6 3.2 Environment Absolute Rating ................................................................... 6 4 Input Terminal Pin Assignment ............................................................................ 7 5 Optical Characteristics......................................................................................... 8 6 Block Diagram ....................................................................................................11 6.1 TFT LCD Module .....................................................................................11 6.2 Pixel Format ............................................................................................11 7 Touch Screen Panel Specifications ................................................................... 12 7.1 electrical Characteristics......................................................................... 12 7.2 Mechanical & Reliability Characteristics ................................................. 12 8 Electrical Characteristics ................................................................................... 13 8.1 TFT LCD Module .................................................................................... 13 8.2 Switching Characteristics for LVDS Receiver ......................................... 13 8.3 Bit Mapping & Interface Defintion ........................................................... 13 8.4 Interface Timing(DE mode)..................................................................... 14 8.5 Timing Diagram of Interface Signal(DE mode) ....................................... 14 8.6 Power Sequence .................................................................................... 15 9 Reliability test items........................................................................................... 16 10 Precautions ....................................................................................................... 17 10.1 Operation................................................................................................ 17 10.2 Safety ..................................................................................................... 17 10.3 Handling ................................................................................................. 17 10.4 Static electricity ....................................................................................... 19 10.5 Storage ................................................................................................... 19 10.6 Cleaning ................................................................................................. 19 10.7 Waste...................................................................................................... 19 11 Warranty ............................................................................................................ 20 12 Outline Dimension ............................................................................................. 21 1
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 4 / 21
1 General Description and Features
GATOA0SP8I1R0 is a TM (Transmissive) type color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT-LCD module, a driver circuit ,a back-light. The resolution of a 10.0" contains 1024RGBx600dots and can display up to 256K colors. The following table described the features of GATOA0SP8I1R0. 1.1 Features Transmissive and back-light with LED are available. TN (Twisted Nematic) mode. One channel LVDS interface Touch Screen Panel 1.2 General Specification 1.2.1 LCD Module
Item Screen Size Display Resolution Dot Pitch Active Area Outline Dimension Display Mode Pixel Arrangement Surface Treatment Display Color Viewing Direction Input Interface Color Gamut(NTSC%) Specification 10.0 inches 1024 x RGB x 600 0.21525 (H) x 0.21525 (V) 220.416 (H) x 129.15 (V) 235 (W) x145.8 (H) x 7.0 (D) Normally white RGB-Stripe Anti-glare 256K 6 o'clock LVDS Interface NTSC 60% Unit Diagonal Dot mm mm mm --------
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 5 / 21
2 Mechanical Information
Item Horizontal (H) Module Size Weight Vertical (V) Thickness (T) Min. 234.5 145.3 --Typ. 235 145.8 7.0 -Max. 235.5 146.3 --Unit mm mm mm g -Note
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 6 / 21
3 Absolute Maximum Ratings
3.1 Electrical Absolute Rating 3.1.1 TFT LCD Module
Item Logic Supply voltage LED Power Supply voltage Symbol VCC VLED Min. -0.3 -0.3 Max. 6.0 6.0 Unit V V GND=0 Note
3.1.2 Touch Panel Unit
Pin No. 1 2 3 4 Symbol X1 Y1 X2 Y2 Touch Panel Left Touch Panel Down Touch Panel Right Touch Panel Up Function Remark
3.2 Environment Absolute Rating
Item Storage temperature Operating temperature Symbol TSTG TOPR Min. -30 -20 Max. 80 70 Unit C C Note -
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 7 / 21
4 Input Terminal Pin Assignment
Pin No. Symbol I/O Function Remark
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
GND VCC VCC V_EDID ADJ CLK_EDID DATA_EDID RXIN0RXIN0+ GND RXIN1RXIN1+ GND RXIN2RXIN2+ GND RXCLKINRXCLKIN+ GND NC NC GND GND VLED VLED VLED NC NC NC NC
P P P P I I I I I P I I P I I P I I P I I P P P P P -
Ground Logic power supply Logic power supply 3.3V Power for NB Adjust for LED brightness EDID Clock for NB EDID Data for NB LVDS Signal- channel0LVDS Signal+ channel0+ Ground Data input channel1Data input channel1+ Ground Data input channel2Data input channel2+ Ground Data input CLKData input CLK+ Ground NC NC Ground Ground LED Power 5V LED Power 5V LED Power 5V NC NC NC NC
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 8 / 21
5 Optical Characteristics
The following items are measured under stable conditions. The optical characteristics should be measured in a dark room or equivalent state with the methods shown in Note (1). Measuring equipment: BM-5A (Ta=252C , Vcc = VCI=3.3V, If=20mA) Item Brightness Response time Symbo l -TR TF
CR
Condition -=0 At optimized viewing angle =0 Normal Viewing Angle
Min 160 --400
Typ 200 5 20 500
Max -7 28 --
Unit cd/m2 ms ms --
Note
(1)(2)(3)(4)
(1),(2)
Contrast ratio Color Chromatic ity
(1)(4)
Wx Whit e Hor. Wy
0.260 0.310 0.360 0.280 0.330 0.380 70 70 50 60 -----(1)
60 R 60 L Viewing CR10 Angle (6H) 40 H Ver. 50 L Note : (1) Measuring surrounding : dark room (2) 15min. warm-up time (3) With touch panel (4) LED current IL=200mA
Degre e
(1)
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 9 / 21
a. Test equipment setup After stabilizing and leaving the panel alone shall be warmed up for the stable operation of LCM, the measurement should be executed. Measurement should be executed in a stable, windless, and dark room. Optical specifications are measured by Topcon BM-7(fast) with a viewing angle of 2 at a distance of 50cm and normal direction. b. Definition of response time: Tr and Tf
The response time is defined as the following figure and shall be measured by switching the input signal for "black" and "white".
c. Definition of contrast ratio: ightness measured when LCD is at "white state" Contrast Ratio (CR) = ightness measured when LCD is at "black state" d. Measured at the center area of the panel when all the input terminals of LCD panel are electrically opened. e. View Angle
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 10 / 21
f. Definition of Luminance of White: Luminance of white at the center points Light Source of Back-Light LED Type Unit g. Definition of White Uniformity Min. luminance of white among 9-points White Uniformity = Max. luminance of white among 9-points h. The definition of Color Gamut -Color Chromaticity CIE 1931 Color coordinate of white & red, green, blue at center point. Color Gamut : NTSC(%) = ( RGB Triangle Area / NTSC Triangle Area ) x 100
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 11 / 21
6 Block Diagram
6.1 TFT LCD Module
6.2 Pixel Format
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 12 / 21
7 Touch Screen Panel Specifications
7.1 electrical Characteristics
Item Linearity Terminal resistance Insulation resistance Voltage Response time Min. -1.5 400 100 10 Typ. 15 Max. 1.5 1350 600 7.0 Unit % M V ms Note Analog X and Y directions X(Glass side) Y(Film side) DC 25V DC
Transparency 80 % Non-glare Caution (1) : Do not operate it with a thing except a polyacetal pen (tip R0.8mm or less) or a finger, especially those with hard or sharp tips such as a ball point pen or a mechanical pencil.
7.2 Mechanical & Reliability Characteristics
Item Activation force Hitting Durability Sliding Durability Surface hardness Min. 1,000,000 100,000 3 Typ. Max. 80 Unit g times times H JIS K5400 Note (1) (2)
Note (1) Input : Finger or polyacetal pen 0.8R Note (2) Pit 1,000,000 times on the Film with a R8.0 (Hardness 60) silicon rubber. - Force : Force : 200g - Frequency : 3 times/sec
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 13 / 21
8 Electrical Characteristics
8.1 TFT LCD Module
Item Supply Voltage Current of power supply Symbol VCC VLED IDD Min. 3.0 4.7 Typ. 3.3 5.0 0.3 Max. 3.6 5.3 Unit V V A VCC =3.3V Note
-
Note: (1)The brightness of LCD panel could be changed by adjusting ADJ.
8.2 Switching Characteristics for LVDS Receiver
Item Differential Input High Threshold Differential Input Low Threshold Input Current Differential Input Voltage Common Mode Voltage Offset Symbol Vth Vtl |IN |VID| VCM Min. --100 -10 0.1 (|VID|/2) Typ. ----1.25 Max. 100 -+10 0.6 1.8-0.4-(|VID|/2) Unit mA mV uA V V Note VCM=1.2V
8.3 Bit Mapping & Interface Defintion
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 14 / 21
8.4 Interface Timing(DE mode)
Item Frame Frame Period Vertical Display Time Vertical Blanking Time 1Line Scanning Time Horizontal Display Time Horizontal Blanking Time Clock Rate Symbol -t1 t2 t3 t4 t5 t6 t7 Min. 55 612 600 12 1160 1024 136 39 Typ. 60 625 600 25 1200 1024 176 45 Max. 65 638 600 38 1240 1024 216 51.42 Unit Hz line line line clock clock clock MHz
8.5 Timing Diagram of Interface Signal(DE mode)
Product Specification Rev. No. A 8.6 Power Sequence
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 15 / 21
Item TP1 TP2 TP3 TP4 TP5 TP6
Min. 0.5 0 0 500 200 200
Typ. -------
Max. 10 50 50 ----
Unit msec msec msec msec msec msec
Remark
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 16 / 21
9
Reliability test items
No change on display and in operation under the following test condition. Condition: Unless otherwise specified, tests will be conducted under the following condition. Temperature: 205C. Humidity: 655%RH. Tests will be not conducted under functioning state. No. 1 2 3 4 5 Parameter High Temperature Operating Low Temperature Operating High Temperature Storage Low Temperature Storage Damp Proof Test Condition 60C2C, 120hrs (Operation state). -10C2C, 120hrs (Operation state). 70C2C, 120hrs. -20C2C, 120hrs. 40C2C, 9095%, 120hrs. Total fixed amplitude: 1.5mm. Vibration Frequency: 1055Hz. One cycle 60 seconds to 3 direction of X, Y, Z each 15 minutes. To be measured after dropping from 60cm high on the concrete surface in packing state. Notes
1 2 1,2 1,2
6
Vibration Test
3
Dropping method corner dropping:
7.
Shock Test
A corner: Once edge dropping. B, C, D edge: Once face dropping. E, F, G face: Once.
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 17 / 21
10 Precautions
10.1 Operation
Burn-in sometimes happens when the same character was displayed at along time. Therefore, to prevent Burn-in, it is recommended to set up a Screen-saver function.
10.2 Safety
The liquid crystal in the LCD is poisonous, DO NOT put it in your mouth. If the liquid crystal touches your skin or clothes, wash it off immediately using soap and water.
10.3 Handling
a. The LCD module shall be installed flat, without twisting or bending. b. COF or FPC has narrow pattern width, so easily become open circuit by external force. DO NOT apply pressure to COF or FPC especially in bending area.
c. To avoid damage in appearance or malfunction, DO NOT subject the module to mechanical shock or to excessive force on its surface.
d. The polarizer attached to the display is very easy to damage, handle it with care to avoid scratching.
e. To avoid contamination on the display surface, DO NOT touch the display surface with bare hands. f. Provide a space so that the LCD module does not come into contact with other components.
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 18 / 21
g. To protect the LCD panel from external pressure, put covering glass (acrylic board or similar board) to keep appropriate space between them.
h. Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur.
i. Property of semiconductor devices may be affected when they are exposed to light possibly resulting in malfunctioning of the ICs. To prevent such malfunctioning of the ICs, your design and mounting layout done are so that the IC is not exposed to light in actual use.
j. Strong light exposure causes degradation of color filter. It may not recover
k. DO NOT contact with water to avoid Metal corrosion. l. When it is not in use, the screen must be turned off or the pattern must be frequently changed by a screen saver. If it displays the same pattern for a long period of time, brightness down/image sticking may develop due to the LCD structure. m. Never disassemble LCD product under any circumstances. If unqualified operators or users assemble the product after disassembling it, it may not function or its operation may be seriously affected.
Product Specification Rev. No. A 10.4 Static electricity
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge.
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 19 / 21
a. The LCD module shall be installed flat, without twisting or bending. Ground soldering iron tips, tools and testers when they operate. b. Ground your body when handling the products. c. DO NOT apply voltage to the input terminal without applying power supply. d. DO NOT apply voltage that exceeds the absolute maximum rating. e. Store the products in an anti-electrostatic container. f. Peel off protect tape, attached to polarizer, slowly to minimize ESD damage.
10.5 Storage
Store the products in a dark place at +5 ~ +25 degree C, low humidity (50%RH or less). DO NOT store the products in an atmosphere containing organic solvents or corrosive gases.
10.6 Cleaning
a. DO NOT wipe the polarizer with dry cloth, as it might cause scratch. b. Wipe the polarizer with a soft cloth soaked with petroleum IPA, other chemical might damage.
10.7 Waste
When dispose of LCD module, manage it at the production waste according to the relevant laws and regulations.
Product Specification Rev. No. A
www..com
Model:
GATOA0SP8I1R0
Issued Date. NOV,21, 08
Page. 20 / 21
11 Warranty
This product has been manufactured to your company's specifications as a part for use in your company's general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in medical devices, nuclear power control equipment, aerospace equipment, fire and security systems, or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. If the product is to be used in any of the above applications, we will need to enter into a separate product liability agreement. 1. 2. 3. 4. We cannot accept responsibility for any defect, which may arise from additional manufacturing of the product (including disassembly and reassembly), after product delivery. We cannot accept responsibility for any defect, which may arise after the application of strong external force to the product. We cannot accept responsibility for any defect, which may arise due to the application of static electricity after the product has passed your company's acceptance inspection procedures. We cannot accept responsibility for industrial property, which may arise through the use of your product, with exception to those issues relating directly to the structure or method of manufacturing of our product. SGD-origin longer than one year from SGD production..
12 Outline Dimension
Model: GATOA0SP8I1R0 Rev. No. A
Product Specification
TOLERANCE VERSION 0.3 SCALE
MATERIAL NO.
FINISH UNIT
MODEL NAME TITLE
GATOA0SP8I1R0
A
DATE
2008.10.06
mm
APPROVED CHECKED DRAWN FILE NAME
NOV,21, 08
OUTLINE
293\I:\TFT\10 inch\GATOA0SP8I1R0
Issued Date. Page. 21 / 21
www..com

▲Up To Search▲

Price & Availability of GATOA0SP8I1R0

	To Download GATOA0SP8I1R0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .