View PYF08A-E_458169.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Miniature Inductive Prox
Cylindrical Inductive Sensors with Separate Amplifiers Provide Variable Detecting Capabilities
s Separate amplifier allows sensor to fit in space-confined sites, providing easy access for monitoring and remote adjustments s Detecting distance and differential travel can be adjusted to meet specific application requirements s Adjustable differential travel to set switching trigger point available on some amplifiers
E2C
Ordering Information
s SENSORS
Miniature Sizes Sensor type Size Nominal detecting distance Part number Standard Sizes Sensor type Size Nominal detecting distance Part number Shielded M8 1.5 mm (0.06 in) E2C-X1R5A Unshielded 40 mm dia. 20 mm (0.79 in) E2C-C20MA Shielded 2.0 mm dia. 0.5 mm (0.02 in) E2C-CR5B
3.5 mm dia. 0.8 mm (0.03 in) E2C-CR8A
3.8 mm dia. 0.8 mm (0.03 in) E2C-CR8B
M5 1 mm (0.04 in) E2C-X1A
5.4 mm dia. 1 mm (0.04 in) E2C-C1A
M12 2 mm (0.08 in) E2C-X2A
M18 5 mm (0.20 in) E2C-X5A
M30 10 mm (0.39 in) E2C-X10A
s AMPLIFIERS
Socket-Mount Types Size Applicable sensors Supply voltage Output type Part number 1/16 DIN All models 90 to 264 VAC, 50/60 Hz Transistor and relay E2C-AK4A 10 to 30 VDC Open collector NPN and PNP E2C-AM4A Miniature E2C-CR8A, E2C-CR8B, E2C-X1A, E2C-C1A, E2C-X1R5A 10 to 30 VDC NPN E2C-GE4A PNP E2C-GF4A NPN E2C-GE4B
E2C-CR5B
PNP E2C-GF4B www..com
www..com
www..com
E2C
s AMPLIFIERS
Track-Mount Types Size Applicable sensors Supply voltage Output type Part number Prewired E2C-CR8A, E2C-X1A, E2C-C1A E2C-X1R5A, E2C-X2A 10 to 30 VDC, NPN with alarm output E2C-JC4AP Screw terminal E2C-CR8A, E2C-X1A, E2C-C1A, E2C-X1R5A Open collector NPN and PNP E2C-WH4AF
E2C
s ACCESSORIES
Description Mounting brackets for sensors Fits 3.5 mm and 3.8 mm dia. unthreaded sensor Fits M8 size threaded sensor Fits M12 size threaded sensor Fits M18 size threaded sensor Fits M30 size threaded sensor Bottom surface or track mounting, top screw terminals Panel mounting, bottom solder terminal Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals Bottom surface or track mounting, top screw terminals Panel mounting, bottom solder terminals Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals Bottom surface or track mounting, top screw terminals Panel mounting, bottom solder terminals Bottom surface mounting, bottom screw terminals Fits behind panel; ideal for side by side installation. Use P2CF- sockets. Installs through panel front; amplifier face fits bezel, rear of amplifier clips to adapter. Use P3G- sockets. Charcoal gray. Hard plastic cover; not for use with Y92F-70 panel adapter Soft plastic cover; not for use with Y92F-70 panel adapter DIN rail, 50 cm (1.64 ft) length DIN rail, 1 m (3.28 ft) length End plate Spacer Part number Y92E-F3R5 Y92E-B8 Y92E-B12 Y92E-B18 Y92E-B30 P2CF-11 PL11 P3G-11 P2CF-08 PL08 P3G-08 PYF08A-E PY08 PYF08M Y92F-30 Y92F-70 Y92A-48 Y92A-48D PFP-50N PFP-100N PFP-M PFP-S
Sockets for amplifiers
E2C-AK4A amplifier E2C-AM4A amplifier E2C-G4 amplifiers
Panel mounting adapters for E2C-A4A amplifiers
Protective covers for E2C-A4A amplifiers Mounting track
s REPLACEMENT PARTS
Description Mounting hardware includes one pair of metal nuts and washers Fits M5 size sensors (supplied with each sensor) Fits M8 size sensors (supplied with each sensor) Fits M12 size sensors (supplied with each sensor) Fits M18 size sensors (supplied with each sensor) Fits M30 size sensors (supplied with each sensor) Part number M5-MHWS M8-MHWS M12-MHWS M18-MHWS M30-MHWS
2
E2C
E2C
Specifications
s MINIATURE SENSORS
Part number Sensor type Body E2C-CR5B E2C-CR8A E2C-CR8B E2C-X1A Inductive Size 2.0 mm dia. 3.5 mm dia. 3.8 mm dia. M5 Type Shielded Required amplifier E2C-AK4A, E2C-AK4A, E2C-AM4A, E2C-GE4A, E2C-AM4A, E2C-GF4A, E2C-JC4AP or E2C-WH4AF E2C-GE4B or E2C-GF4B Detectable object type Metallic objects Usable setting distance at 0 to 0.5 mm 0 to 0.8 mm 0 to 1.0 mm ambient (with standard target) (0 to 0.02 in) (0 to 0.03 in) (0 to 0.04 in) Usable setting distance at 0 to 0.7 mm 0 to 1.2 mm 0 to 1.5 mm 0 to 40C (with standard target) (0 to 0.028 in) (0 to 0.047 in) (0 to 0.059 in) Standard target size 5 x 5 x 1 mm (mild steel, L x W x H) (0.20 x 0.20 x 0.04 in) Differential travel See "Differential Travel" tables Response frequency 1 kHz Materials Housing 304 stainless steel Sensing face ABS Cable sheath Polyethylene Mounting -- Optional mounting strap Two lock washers Y92E-F3R5, order separately and M5 nuts included Connections Prewired Two-conductor cable, 3 m (9.8 ft) length Weight with cable 10 g (0.4 oz.) 40 g (1.4 oz.) 45 g (1.6 oz.) Enclosure UL -- ratings NEMA 1,2 1, 3, 4, 6, 12, 13 IEC 144 IP64 IP67 Approvals UL -- CSA -- Ambient operating temperature -25 to 70C (-13 to 158F) Vibration 10 to 55 Hz, 1.5 mm (0.06 in) double amplitude, 2 hours each, X and Y directions Shock 50 G's, 3 times each, X and Y directions E2C-C1A 5.4 mm dia.
Nickel-plated brass
--
3
E2C
s STANDARD SIZE SENSORS
E2C-X1R5A E2C-X2A E2C-X5A E2C-X10A Inductive Size M8 M12 M18 M30 Type Shielded Required amplifier E2C-JC4AP, E2C-AK4A or E2C-AM4A E2C-AK4A or E2C-AM4A Detectable object type Metallic objects Usable setting distance at 0 to 1.5 mm 0 to 2 mm 0 to 5 mm 0 to 10 mm ambient (with standard target) (0 to 0.06 in) (0 to 0.08 in) (0 to 0.20 in) (0 to 0.39 in) Usable setting distance 0 to 2 mm 0 to 2.5 mm 0 to 7 mm 0 to 15 mm 0 to 40C (with standard target) (0 to 0.079 in) (0 to 0.098 in) (0 to 0.276 in) (0 to 0.591 in) Standard target size 8 x 8 x 1 mm 12 x 12 x 1 mm 18 x 18 x 1 mm 30 x 30 x 1 mm (mild steel, L x W x H) (0.32 x 0.32 (0.47 x 0.47 (0.71 x 0.71 (1.18 x 1.18 x 0.04 in) x 0.04 in) x 0.04 in) x 0.04 in) Differential travel See "Differential Travel" tables Response frequency 800 Hz 350 Hz 100 Hz Materials Housing Nickel-plated brass Sensing face ABS Cable sheath Polyethylene Mounting Two lock washers Two lock washers Two lock washers Two lock washers and M8 nuts and M12 nuts and M18 nuts and M30 nuts included. Bracket included. Bracket included. Bracket included. Bracket Y92E-B8 optional. Y92E-B12 optional. Y92E-B18 optional. Y92E-B30 optional. Connections Prewired Two-conductor cable, 3 m (9.8 ft) length Weight with cable 50 g (1.8 oz.) 60 g (2.1 oz.) 140 g (4.9 oz.) 270 g (9.5 oz.) UL -- Enclosure ratings NEMA 1, 3, 4, 6, 12, 13 IEC 144 IP67 Approvals UL -- CSA -- Ambient operating temperature -25 to 70C (-13 to 158F) Vibration 10 to 55 Hz, 1.5 mm (0.06 in) double amplitude, 2 hours each, X and Y directions Shock 50 G's, 3 times each, X and Y directions Part number Sensor type Body
E2C
E2C-C20MA 40 mm dia. Unshielded
0 to 20 mm (0 to 0.79 in) 0 to 28 mm (0 to 1.102 in) 50 x 50 x 1 mm (1.97 x 1.97 x 0.04 in) 50 Hz
--
300 g (10.6 oz.)
4
E2C
s AMPLIFIERS
Socket-Mount Type Part number Supply voltage Current consumption Differential travel Control Relay Type output Max. load Min. load Type E2C-AK4A E2C-AM4A 90 to 264 VAC, 10 to 30 VDC 50/60 Hz 55 mA max. 25 mA max. See "Differential Travel" tables SPDT -- 2 A, 250 VAC -- (p.f. = 1) 1 mA, 5 VDC -- Transistor, One NPN open SPST collector, one PNP open collector 50 mA, 40 VDC 200 mA 2 VDC 1.5 VDC E2C-GE4A E2C-GF4A E2C-GE4B
E2C
E2C-GF4B
DC solidstate
NPN open collector with pull-up 100 mA
PNP open collector with pull-down
NPN open collector with pull-up
PNP open collector with pull-down
Max. load Max. on-state voltage drop Indicators Materials Mounting Case
Connections Weight (not including socket) Enclosure UL ratings NEMA IEC 144 Approvals UL CSA Ambient operating temperature Vibration Shock
Output Operation (red LED) and Output Operation (red LED) Output Stability (red LED) Plastic Requires Requires Requires PYF08A-E, PY08 or PYF08M socket P2CF-11, P2CF-08, (not included). Order separately from Accessories. PL11 or P3G-11 PL08 or P3G-08 socket (not socket (not included). Order included). Order separately from separately from Accessories. Accessories. Plated steel screw terminals or solder terminals, refer to sockets in Accessories section. 250 g (8.8 oz.) 140 g (4.9 oz.) 20 g (0.7 oz.) -- 1 IP 40 -- -- -10 to 55C (14 to 131F) 10 to 25 Hz, 2 mm (0.08 in) double amplitude, 2 hours each, X and Y directions 10 G's, 3 times each, X and Y directions
5
E2C
s AMPLIFIERS
Track-Mount Type Part number Supply voltage Current consumption Differential travel Control DC Type output solid- Max. load state Max. on-state voltage drop Alarm output Type Max. load Indicators Materials Mounting Connections Weight Enclosure ratings Case E2C-JC4AP 10 to 30 VDC 45 mA See "Differential Travel" tables NPN open collector 100 mA 1 VDC NPN open collector 50 mA Output Operation (red LED), Output Stability (green LED) Plastic DIN rail track, E39-L48 mounting bracket, or two side through holes Prewired, 4-conductor cable, 2 m (6.56 ft) length E2C-WH4AF 25 mA
E2C
One NPN open collector, one PNP open collector 200 mA 0.7 VDC Not provided -- Output Operation (red LED)
UL NEMA IEC 144 Approvals UL CSA Ambient operating temperature Vibration Shock
80 g (2.8 oz.) with cable -- 1 IP 40 -- -- -10 to 55C (14 to 131F) 10 to 25 Hz, 2 mm (0.08 in) double amplitude, 2 hours each, X and Y directions 10 G's, 3 times each, X and Y directions
DIN rail track or bottom surface with two through holes Terminal screws or direct connection to S308 sensor controller with E99-C connector (included). 80 g (2.8 oz.) with cable
s DIFFERENTIAL TRAVEL
E2C-AK4A and E2C-AM4A amplifiers Amplifier part number Sensor part number Differential travel (% of detecting distance) At minimum At maximum detecting detecting distance distance 1 to 5%, 1 to 5%, adjustable adjustable E2C-G4A, E2C-G4B and E2C-WH4AF amplifiers Amplifier part number Sensor part number Differential travel (% of detecting distance) At minimum At maximum detecting detecting distance distance 2.0 to 4.7%, 3.8 to 6.0%, fixed fixed 0.9 to 1.9%, 0.4 to 3.8%, fixed fixed 0.5 to 2.6%, 0.1 to 4.3%, fixed fixed 1.7 to 4.2%, 2.7 to 6.0%, fixed fixed 1.6 to 17.6%, 4.4 to 19.2%, fixed fixed 2.0 to 4.7%, 3.8 to 6.0%, fixed fixed 0.9 to 1.9%, 0.4 to 3.8%, fixed fixed 0.5 to 2.6%, 0.1 to 4.3%, fixed fixed 1.7 to 4.2%, 2.7 to 6.0%, fixed fixed
E2C-AK4A
E2C-AM4A
E2C-CR5B E2C-CR8A E2C-CR8B E2C-X1A E2C-C1A E2C-X1R5A E2C-X2A E2C-X5A E2C-X10A E2C-C20MA E2C-CR5B E2C-CR8A E2C-CR8B E2C-X1A E2C-C1A E2C-X1R5A E2C-X2A E2C-X5A E2C-X10A E2C-C20MA
E2C-G4A
E2C-CR8A,8B E2C-X1A E2C-C1A E2C-X1R5A
E2C-G4B 1 to 5%, adjustable 1 to 5%, adjustable
E2C-CR5B
E2C-JC4AP, E2C-CR8A E2C-WH4AF E2C-X1A E2C-C1A E2C-X1R5A
6
E2C
E2C
Operation
s OUTPUT CIRCUIT DIAGRAMS E2C-AK4A Amplifier
AC input, transistor and relay outputs
50 mA max. 2.2
5
E2C-AM4A Amplifier
DC input, open collector NPN and PNP outputs
8
+12 to 24 VDC Output 1 (PNP) Output 2 (NPN) 0V
Output (+) 47 V Main circuit Output (-)
Main circuit
2
47 V
200 mA max. 2.2
1
47 V
7
6
E2C-GE4 Amplifiers
DC input, NPN or PNP outputs
13
E2C-GF4 Amplifiers
DC input, NPN and PNP outputs
13
+12 to 24 VDC 47 V
+12 to 24 VDC
3.9k Main circuit 100 mA max.
2.2
9
Output (+) 0V
Main circuit 3.9k
2.2
9
Output 0V
47 V
14
100 mA max.
14
E2C-WH4AF Amplifier
DC input, open collector NPN and PNP outputs
6
E2C-JC4AP Amplifier
DC input, open collector NPN output with alarm
Red DC 10 to 30 VDC Load White Main circuit 2.2 3.9 ZD ZD Black 0V Alarm output 50 mA max. Yellow 100 mA max. output
+12 to 24 VDC Output 2 (PNP) Output 1 (NPN) 0V
47 V Main circuit 200 mA 2.2 max. 8 47 V 2.2
5 7
200 mA max. 47 V 2.2 Output when connected to S3D8 sensor controllers
ZD: VZ = 40 V
7
E2C
E2C
Engineering Data
s OPERATING RANGE
Shielded 2 mm dia. sensor E2C-CR5B
X Detecting distance (variable): 0.2 to 0.5 mm Y 100%
Shielded 3.5 mm & 3.8 mm dia. sensor E2C-CR8A, E2C-CR8B
1.6 X
Shielded M5 and 5.4 mm dia. sensors E2C-X1A, E2C-C1A
1.6 X
Detecting distance X (mm)
Detecting distance X (mm)
Y Detecting distance (variable): 0.16 to 0.8 mm 100%
Detecting distance X (mm)
1.4 1.2 1.0 0.8 0.6 0.4 0.2
1.4 1.2 1.0 0.8 0.6 0.4 0.2
Detecting distance (variable): 0.2 to 1 mm Y
0.5 0.4 0.3
100%
50% 0.2 0.1 20%
50%
50% 20%
20%
-1.0
-0.8
-0.4
0
0.4
0.8
1.0
/
E2C-CR5B Y (mm) / detecting head 2 dia.
-3.0
-2.0
-1.0
0
1.0
2.0
3.0
-3.0
-2.0
-1.0
0 0.5 1.0 1.5 2.0 2.5 3.0
/ detecting head /
E2C-CR8A
Y (mm)
/ E2C-X1A detecting head / Y / E2C-C1A detecting head / (mm)
Shielded M8 sensor E2C-X1R5A
2.5
Shielded M12 sensor E2C-X2A
3.0 X Detecting distance (variable): 0.4 to 2 mm Y 100%
Shielded M18 sensor E2C-X5A
8 X Detecting distance (variable): 1 to 5 mm Y
Detecting distance X (mm)
2.0
Y 100%
Detecting distance X (mm)
X
Detecting distance X (mm)
Detecting distance (variable): 0.3 to 1.5 mm
7 6 5 4 3 2 1 0
2.0
100%
1.5
1.0 50% 0.5
1.0
50%
50%
20% 0
20%
20%
0
-4
-3
-2
-1
0
1
2
3
4
-6
-4
-2
0
2
4
6
-10 -8
-6 -4
-2
0
2
4
6
8
10
/
E2C-X1R5A detecting head
/ Y (mm)
/E2C-X2A detecting head /
Y (mm)
/E2C-X5A detecting head Y (mm) /
Shielded M30 sensor E2C-X10A
16 X Detecting distance (variable): 2 to 10 mm
Unshielded 40 mm dia. sensor E2C-C20MA
30 X Y Detecting distance (variable): 4 to 20 mm 100%
Detecting distance X (mm)
14 Y 12 10 8 6 4 2 0 -15 -10 -5 0
Detecting distance X (mm)
100%
20
50%
10
50%
20% 0 5 10 15 -20 -15 -10 -5 0 5 10 15
20%
20
25
/
E2C-X10A detecting head
/ Y (mm)
/
E2C-C20MA detecting head
/ Y (mm)
8
E2C
s DETECTING DISTANCE vs. SIZE AND MATERIAL OF TARGET
Shielded 2 mm dia. sensor E2C-CR5B
X t = 1 mm
E2C
Shielded 3.5 mm & 3.8 mm dia. sensor E2C-CR8A, E2C-CR8B
1.6
Shielded M5 and 5.4 mm dia. sensors E2C-X1A, E2C-C1A
1.6
1.2
Detecting distance X (mm)
Detecting distance X (mm)
1.0 0.8 0.6 0.4 0.2
Detecting distance X (mm)
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 2 4 6
X
t = 1 mm 1.4 1.2 1.0
X
t = 1 mm
Mild steel 0.8 0.6 0.4 0.2 0
Mild steel
Mild steel
0
4
8
12
16
20
24
8
10
12 14 16 18 20 22
2
4
6
8
10
12 14 16 18 20 22
Size of target
(mm)
Size of target
(mm)
Size of target
(mm)
Shielded M8 sensor E2C-X1R5A
2.5
Shielded M12 sensor E2C-X2A
3.5
Shielded M18 sensor E2C-X5A
8.0 X t = 1 mm 6.0 5.0 4.0 3.0 Brass 2.0 Aluminum 1.0 0 Mild steel
Detecting distance X (mm)
X 3.0 2.5 2.0 1.5 1.0 0.5
t = 1 mm
Detecting distance X (mm)
X 2.0
t = 1 mm Mild steel
1.5 Stainless steel 1.0 Brass 0.5 Aluminum 0
Mild steel
Detecting distance X (mm)
7.0
Stainless steel
Stainless steel
Brass Aluminum
0 2 4 6 8 10 12 14 16 18 20 2 4 6 8 10 12 14 16 18 20 22
5
10
15
20
25
30
35
40
45
Size of target
(mm)
Size of target
(mm)
Size of target
(mm)
Shielded M30 sensor E2C-X10A
16.0
Unshielded 40 mm dia. sensor E2C-C20MA
35 X 30 25 Mild steel 20 15 10 5 0 Stainless steel Brass Aluminum t = 1 mm
Detecting distance X (mm)
14.0 12.0 10.0 8.0 6.0
X
t = 1 mm Mild steel
Stainless steel
Brass 4.0 Aluminum 2.0 0
5
10
15
20
25
30
35
40
45
Detecting distance X (mm)
10
20 30 40 50 60 70 80 90 100 110
Size of target
(mm)
Size of target
(mm)
Note: If the target is a nonferrous metal, the operating distance of the proximity sensor decreases. However, with a piece of foil measuring about 0.01 mm (0.0004 inch) in thickness, the detecting distance is equivalent to that with a ferrous metal. Note that the proximity sensor cannot detect extremely thin evaporated films and non-conductive targets.
9
E2C
E2C
Dimensions
Unit: mm (inch)
s SENSORS Miniature Sizes
E2C-CR5B
2 (0.079) dia. 15 (0.59) 3,000 (118.1)
E2C-CR8A, E2C-CR8B
A (See Note.) 15 (0.59) 3,000 (118.1)
1.2 (0.047) dia.
Shielded cable
2.5 (0.098) Coaxial cable dia. Note: For E2C-CR8A, A= 3.5 mm (0.14 in) For E2C-CR8B, A=3.8 mm (0.15 in)
E2C-X1A
8 (0.32) across flats 18 (0.71) 15 (0.59) 3,000 (118.1) 2.5 (0.098)dia.
E2C-C1A
5.4 (0.21) dia.
18 (0.71)
3,000 (118.1)
5.5 (0.22) dia.
M5 x 0.5
Coaxial cable
2.5 (0.098) Coaxial cable dia.
Standard Sizes
E2C-X1R5A
13 (0.51) across flats
E2C-X2A
17 (0.67) across flats 18 (0.71) 15 (0.59) 3,000 (118.1) 2.5 (0.098) dia.
18 (0.71)
3 (0.118)
3,000 (118.1)
8.5 (0.33) dia.
2.5 (0.098) Coaxial cable M8 x 1 dia.
Coaxial cable 12.5 (0.492) dia. M12 x 1
E2C-X5A
24 (0.94) across flats 30 (1.18) 27 (1.06) 3,000 (118.1) 4 (0.16) dia.
E2C-X10A
36 (1.42) across flats 40 (1.57) 37 (1.46) 3,000 (118.1)
5.4 (0.21) dia.
Coaxial cable 18.5 (0.73) dia. M18 x 1 30.5 (1.2) dia. M30 x 1.5
Coaxial cable
E2C-C20MA
40 (1.57) dia. 50 (1.96) 25 22 (0.984) (0.86) 3,000 (118.1)
5.4 (0.21) dia.
Coaxial cable M18 x 1 40 (1.57) dia.
10
E2C
s SOCKET-MOUNT AMPLIFIERS 1/16 DIN Size
E2C-AK4A AC type, fits 11-pin sockets E2C-AM4A DC type, fits 8-pin sockets
48 (1.89) 84.7 (3.33) 63.5 (2.5) 14.2 (0.56)
E2C
Miniature
E2C-G4
20.7 (0.81) 35.5 (1.39) 5.4 (0.21)
[7(0.28)]
27.2 (1.07)
44.8 (1.76)
3.5 (0.14) 6 (0.24)
s TRACK-MOUNT AMPLIFIERS
E2C-JC4AP
Stability indicator M2.6 Operation indicator 40 ms OFF-delay selector switch NO/NC mode switch
Sensitivity adjuster 2-o3.3 (0.13) 10 (0.39) 5 (0.19) 50 (1.97)
Apply protective sticker here
4.5 (0.18)mm dia. cable, 2 m (6.56 ft) length 30 (1.18) 3.5 (0.14) 12 (0.47)
2.5 (0.10)
14 0.55
10 (0.39)
43 (1.69) 60 (2.36) Mounting bracket E39-L48
E2C-WH4AF
22.5 (0.89) M3.5 80 (3.15)
Connector on either side for connection to sensor controller
Mounting holes
Slot for track mounting
Two M4 holes
75 (2.95)
66 (2.6)
66 (2.6)
Two 4.5 (0.18) dia. mounting holes
12.5 (0.49)
Note: When E2C-WH4AF amplifier is connected to S3D8 sensor controller, using the E99-C connector supplied, the amplifier is powered by the controller and the output is connected to the sensor controller.
11
E2C
s OPTIONAL MOUNTING BRACKETS FOR STANDARD SIZE THREADED SENSORS
A
E2C
B E F C D
Part number Y92E-B8 Y92E-B12 Y92E-B18 Y92E-B30
Drawing dimensions A 18 (0.71) 0.2 24 (0.94) 0.2 32 (1.26) 0.2 45 (1.77) 0.2 B 10 (0.39) max. C 18 (0.71) D 8 (0.31) dia. E 28 (1.10) max. F M4 x 20 bolt M4 x 25 bolt M5 x 32 bolt M5 x 50 bolt
Applicable sensor models E2C-X1R5A E2C-X2A E2C-X5A E2C-X10A
12.5 (0.49) max. 20 (0.79) 17 (0.67) max. 17 (0.67) max. 30 (1.18) 50 (1.97)
12 (0.47) dia. 37 (1.46) max. 18 (0.71) dia. 47 (1.85) max. 30 (1.18) dia. 60 (2.36) max.
s SOCKETS FOR AMPLIFIERS 11-Pin Sockets for E2C-AK4A Amplifier
P2CF-11 Bottom surface or track mounting socket
Eleven M3.5 x 7.5 sems 7.8 (0.31) 3 (0.12) 4.5 (0.18)
Terminal arrangement
Mounting holes
Two 4.5 (0.18) dia. socket mounting holes 70 (2.75) max. 35.4 (1.39) Two 4.5 (0.18) dia. mounting holes 50 (1.97) max. 31 (1.22) max. 40 (1.57) 0.2
4
(Top view)
PL11 Panel mounting socket
3.5 (0.14) 4 (0.16) 1 (0.04) Two 2 dia. holes
Terminal arrangement
Mounting holes
Two 3.5 (0.14) dia. or two M3 socket mounting holes
51 (2.00) 40 max. (1.57)
30 (1.18) dia.
3.9 (0.15)
31 dia. hole
40 (1.57) 0.3
35 (1.38) max.
Approx. 20.5 (0.80)
(Bottom view)
P3G-11 Back mounting socket
27(1.06) dia.
7 (0.28) 9 (0.35)
Terminal arrangement
26.6 45 (1.05) (1.77)
8 (0.31)
45 (1.77)
17.5 4.5 (0.69) 5 (0.20) (0.18)
(Bottom view)
8-Pin Sockets for E2C-AM4A Amplifier
P2CF-08 Bottom surface or track mounting socket
Eight M3.5 x 7.5 sems 3 (0.12) 7.8 (0.31) 4.5 (0.18) Two 4.5 (0.18) dia. or two M4 socket mounting holes 70 (2.76) max. 35.4 (1.39) Two 4.5 (0.18) dia. mounting holes 40 (1.57)
0.2
Terminal arrangement
Mounting holes
4 (0.16)
50 (1.97) max.
(Top view)
20 (0.79) max.
12
E2C
8-Pin Sockets for E2C-AM4A Amplifier (continued)
PL08 Panel mounting socket
16 (0.63)
E2C
Terminal arrangement
Two 2 (0.08) dia. holes
Mounting holes
Two 3.5 (0.14) dia. or two M3 socket mounting holes
50.5 (1.99) 40 max. (1.57)
30 (1.18)dia. 3.9 (0.15) 3.5 (0.14) 35 (1.38) max. Approx. 20.5 (0.81)
31 dia. hole
40 (1.57) 0.3
(Bottom view)
P3G-08 Back mounting socket
45 (1.77) 27 (1.06) dia. 4.5 17.5 (0.17) (0.69) 7 (0.28) 9 (0.35) 45 (1.77) 8 (0.32)
Terminal arrangement
(Bottom view)
Sockets for E2C-G4 Amplifiers
PYF08A-E Bottom surface or track mounting socket
6 Two 4.2 dia. x 5 mounting (0.24) Eight holes M3 x 8 sems 3.4 (0.13)
Terminal arrangement
Mounting holes
Two M3 or M4 or 4.5 (0.18) dia. socket mounting holes
59 (2.32) 0.3 72 (2.83) max. 35.4 (1.39)
15 (0.59) 0.2 4 (0.16) 23 (0.91) max. 6 (0.24) 15.5 (0.61)
(Bottom view)
30 (1.18) max.
PY08 Panel mounting socket
Eight-3 x 1.2 elliptic holes
Terminal arrangement
Panel cutout
0.2 25.8 (1.02) + 0
Eight-3 x 1.2 elliptic holes 25.5 (1.00) max. 29.5 (1.16)max.
21.4 (0.84) + 0.2 0
(Bottom view)
2.7 (0.11) 7.7 (0.30) 2.6 (0.10) 24 (0.94) max. 20 (0.79)max.
PYF08M Bottom surface mounting socket
Eight M3.5 sems 7 (0.28) 40 (1.57) max. 3 (0.12)dia.
Terminal arrangement
Mounting holes
3.5 (0.14) dia. socket mounting hole 20 (0.78) 0.1 3.5 (0.14) dia. or M3 socket mounting hole
44.5 (1.75) max. 3.5 (0.14) dia. mounting hole 6.5 (0.26) dia. spot facing Depth: 11.5 (0.45)
1.5 (0.06) 18 (0.71)max.
(Top view)
13
E2C
s PANEL MOUNTING ADAPTERS For E2C-A4A Amplifiers
Y92F-30 Mounting adapter Adapter installs behind the panel. It is ideal for side by side installation. Use P2CF- sockets Panel cutout
Back mounting socket P3G- 0.5 (0.02) R max.
0.5 45 (1.77) 0
E2C
15 (0.59)
Mounting panel Y92F-30 adapter for flush mounting
45 (1.77)
0.5 0
58 (2.28)
48 (1.89)
Note: Recommended panel thickness is 1 to 3.2 mm. 6 (0.24) 91.4 (3.60)
Y92F-70 Mounting adapter Charcoal gray panel adapter installs through panel front. Amplifier face fits bezel, rear of amplifier clips to adapter. Use P3G- sockets.
Mounting panel Back mounting socket P3G- 0.5 (0.02) R max. 76 (2.99) 0.2 Note: Recommended panel thickness is 1 to 3.2 mm.
Panel cutout
52 (2.05) to 53 (2.09)
88 (3.46) 45 (1.77)
0.15
65 (2.56) to 66 (2.6)
45 (1.77) 0.15 58(2.28) 16 (0.63)
85.4 (3.36)
Two 4.5 (0.18) dia. mounting holes for panel adapter
Note: With Type H3BF-8, dimension * should read as 16.7 mm (.657").
s PROTECTIVE COVERS For E2C-A4A Amplifiers
Y92A-48 Hard plastic cover, Y92A-48D Soft plastic cover Hard plastic cover Y92A-48 and soft plastic cover Y92A-48D snap onto the front of the amplifier to protect it from dust, dirt and water drip. The Y92A-48
50.5 (1.99)
hard plastic cover projects 4 mm from the front of the amplifier. Y92A-48D soft plastic cover fits snugly over the front.
50.5 (1.99) 11 (0.43) overall depth
s MOUNTING TRACK AND ACCESSORIES
PFP-100N/PFP-50N DIN Rail PFP-M End Plate
6.2 (0.24) 4.5 (0.18) 24 27(1.06) 0.15 (0.94) 35(1.37) 0.3 25 10(0.39) 10(0.39) 25 1.5 (0.06) (0.98) (0.98) 15(0.59) 1000 (39.37) 7.3(0.29) 0.15 [500 (19.68)] 50 (1.97) 11.5 (0.45) 10 (0.39) 4.8 (0.19) 10 (0.39) 1.8 (0.07) 35.3 (1.39) 37.3 (1.47) 1.8 (0.07) 1.3 (0.05)
PFP-S Spacer
44.3 (1.74) 12 (0.47) 16 (0.63) 34.8 (1.37) 16.5 (0.65) 5 (0.20)
15 (0.59)
14
E2C
E2C
NOTE: DIMENSIONS ARE SHOWN IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
OMRON ELECTRONICS, INC.
One East Commerce Drive Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue Scarborough, Ontario M1B 5V8
1-800-55-OMRON
Cat. No. CEDSAX3 10/99 Specifications subject to change without notice.
416-286-6465
Printed in the U.S.A.
15

▲Up To Search▲

Price & Availability of PYF08A-E

	To Download PYF08A-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .