Part Number Hot Search : 
EM91450D DS33R11 74LVX02 XJXXX BD1396S RT0302 PM6602 2833PS
Product Description
Full Text Search
 

To Download MA4SW310B-1 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Monolithic Pin Diode Switches with Integrated Bias Network
V3.00
MA4SW210B-1, MA4SW310B-1
Features
* * * * *
Chip Layout
MA4SW210B-1
Broad Bandwith Specified up to 18 GHz Usable up to 26 GHz Integrated Bias Network Low Insertion Loss / High Isolation Rugged, Fully Monolithic, Glass Encapsulated Construction
Description
The MA4SW210B-1 and MA4SW310B-1 devices are SP2T and SP3T broad band switches with integrated bias networks utilizing M/A-COM's HMIC TM (Heterolithic Microwave Integrated Circuit) Process, US Patent 5,268,310. This process allows the incorporation of silicon pedestals that form series and shunt diodes or vias by imbedding them in low loss, low dispersion glass. By using small spacing between elements, this combination of silicon and glass gives HMIC devices low loss and high isolation performance with exceptional repeatability through low millimeter frequencies. Large bond pads facilitate the use of low inductance ribbon bonds, while gold backside metalization allows for manual or automatic chip bonding via 80Au/20Sn, Sn62/Pb36/Ag2 solders or electrically conductive silver epoxy.
MA4SW310B-1
Absolute Maximum Ratings1 @TA = 25 C (unless otherwise specified)
Parameter Operating Temperature Storage Temperature RF C.W. Incident Power @ +/- 20mA D.C. Bias Current Absolute Maximum -65 C to +125 C 65 C to +150 C +30 dBm +/- 40 mA
1. Exceeding any one or combination of these limits may cause permanent damage.
Monolithic Pin Diode Switches w/Integrated Bias Network
MA4SW210B-1, MA4SW310B-1
V 3.00
MA4SW210B-1 (SP2T) Electrical Specifications @ TA = +25 C, +/ 20 mA Bias Current
Parameter Insertion Loss Frequency 6 GHz 12 GHz 18 GHz 6 GHz 12 GHz 18 GHz 6 GHz 12 GHz 18 GHz Switching Speed1 Minimum Nominal 0.60 0.80 1.25 51.4 45.1 40.4 20.5 18.2 14.0 50.0 Maximum 1.0 1.1 2.25 Units dB dB dB dB dB dB dB dB dB ns
Isolation
Input Return Loss
47.5 41.4 36.2 18.5 12.9 19.0
MA4SW310B-1 (SP3T) Electrical Specifications @ TA = +25 C, +/ 20 mA Bias Current
Parameter Insertion Loss Frequency 6 GHz 12 GHz 18 GHz 6 GHz 12 GHz 18 GHz 6 GHz 12 GHz 18 GHz Switching Speed1 Minimum Nominal 0.58 0.76 1.04 58.6 48.5 42.5 19.9 19.4 17.3 50.0 Maximum 1.16 1.38 1.81 Units dB dB dB dB dB dB dB dB dB ns
Isolation
Input Return Loss
49.0 41.4 36.0 16.3 13.0 10.9
1 Typical Switching Speed measured from 10% to 90% of detected RF signal driven by TTL compatible drivers using RC Output Spiking Network, R = 50 - 200 , C = 390 - 560 pF.
Operation of the MA4SW 210B-1 and 310B-1
Operation of the MA4SW210B-1 and MA4SW 310B-1 PIN Switches is achieved by simultaneous application of DC currents to the bias pads. The required levels for the different states are shown in the tables below. The control currents should be supplied by constant current sources. The nominal 40 - 60 pull-up resistor voltage @ J4 and J5 for -20 mA is usually -1V for +20 mA is usually +1 V.
Driver Connections MA4SW210B-1
Control Level (DC Current) at J4 -20 mA +20 mA J5 +20 mA -20 mA Condition of RF Output J1 - J2 Low Loss Isolation Condition of RF Output J1 - J3 Isolation Low Loss
2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Visit www.macom.com for additional data sheets and product information.
n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Monolithic Pin Diode Switches w/Integrated Bias Network Driver Connections MA4SW310B-1
Control Level (DC Current) at J5 -20 mA +20 mA +20 mA J6 +20 mA -20 mA +20 mA J7 +20 mA +20 mA -20 mA Condition of RF Output J1 - J2 Low Loss Isolation Isolation Condition of RF Output J1 - J3 Isolation Low Loss Isolation
MA4SW210B-1, MA4SW310B-1
V 3.00
Condition of RF Output J1 - J4 Isolation Isolation Low Loss
Handling Considerations
Cleanliness
These chips should be handled in a clean environment. Do not attempt to clean chips after installation.
Electro-Static Sensitivity
The MA4SW210B-1 and MA4SW310B-1 Series PIN Diode Switches are ESD, Class 1 sensitive. The proper ESD handling procedures should be used.
Wire Bonding
Thermosonic wedge wire bonding using 0.003" x 0.00025" ribbon or 0.001" diameter gold wire is recommended. A stage temperature of 150 oC and a force of 18 to 22 grams should be used. Ultrasonic energy should be adjusted to the minimum required. RF bonds should be as short as possible.
Mounting
These chips have TiPtAu back metal. They can be die mounted with a gold-tin eutectic solder preform or conductive epoxy. Mounting surface must be clean and flat.
Eutectic Die Attachment
An 80/20 gold-tin eutectic solder preform is recommended with a work surface temperature of 255 oC and a tool tip temperature of 265oC. When hot gas is applied, the tool tip temperature should be 290 oC. The chip should not be exposed to temperatures greater than 320 oC for more than 20 seconds. No more than three seconds should be required for attachment.
Electrically Conductive Epoxy Die Attachment
Assembly should be preheated to 125-150 oC. A minimum amount of epoxy should be used, approximately 1 to 2 mils thickness. A thin epoxy fillet should be visible around the perimeter of the chip after placement. Cure epoxy per manufacturer's schedule time-temperature schedule.
3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Visit www.macom.com for additional data sheets and product information.
n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Monolithic Pin Diode Switches w/Integrated Bias Network Typical Performance Curves - MA4SW210B-1
Isolation vs. Frequency
0 -10
RETURN LOSS, dB
MA4SW210B-1, MA4SW310B-1
V 3.00
Return Loss vs. Frequency
0 -5 -10 -15 -20 -25 -30 -35 -40
ISOLATION, dB
-20 -30 -40 -50 -60 -70 0 2 4 6 8 10 12 14 16 18 20 22 24 26 FREQUENCY, GHz
0
2
4
6
8
10
12
14
16
18
20
22
24
26
FREQUENCY, GHz
Insertion Loss vs. Frequency
2 1 INSERTION LOSS, dB 0 -1 -2 -3 -4 -5 -6 -7 -8 0 2 4 6 8 10 12 14 16 18 20 22 24 26
FREQUENCY, GHz
4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Visit www.macom.com for additional data sheets and product information.
n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Monolithic Pin Diode Switches w/Integrated Bias Network Typical Performance Curves - MA4SW310B-1
Isolation vs. Frequency
0 -10
RETURN LOSS, dB
MA4SW210B-1, MA4SW310B-1
V 3.00
Return Loss vs. Frequency
(MA4SW310B-1) 0 -5 -10 -15 -20 -25 -30 -35 -40
ISOLATION, dB
-20 -30 -40 -50 -60 -70 0 2 4 6 8 10 12 14 16 18 20 22 24 26 FREQUENCY, GHz
0
2
4
6
8
10
12
14
16
18
20
22
24
26
FREQUENCY, GHz
Insertion Loss vs. Frequency
2 1 INSERTION LOSS, dB 0 -1 -2 -3 -4 -5 -6 -7 -8 0 2 4 6 8 10 12 14 16 18 20 22 24 26 FREQUENCY, GHz
5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Visit www.macom.com for additional data sheets and product information.
n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Monolithic Pin Diode Switches w/Integrated Bias Network
MA4SW210B-1, MA4SW310B-1
V 3.00
MA4SW210B-1 Series Diode Junction Temperature vs Incident Power at 8 GHz
140 5 mA
Series Diode_5mA
120
Series Diode_10mA Series Diode_20mA Series Diode_40mA
100 Tjunction ( deg C )
10 mA
80 20 mA
60
40 mA 40
20 10.00
15.00
20.00
25.00
30.00
35.00
C.W. Incident Power ( dBm )
6 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Visit www.macom.com for additional data sheets and product information.
n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Monolithic Pin Diode Switches w/Integrated Bias Network
MA4SW210B-1, MA4SW310B-1
V 3.00
MA4SW210B-1 Compression Power vs Incident Power at 8 GHz
0.80
0.70
Series Diode_5mA Series Diode_10mA
5 mA
0.60
Series Diode_20mA Series Diode_40mA
Compression Power ( dB )
0.50
10 mA
0.40
20 mA
0.30
40 mA
0.20
0.10
0.00 10.00
15.00
20.00
25.00
30.00
35.00
C.W. Incident Power ( dBm )
7 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Visit www.macom.com for additional data sheets and product information.
n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Monolithic Pin Diode Switches w/Integrated Bias Network MA4SW210B-1
DIM. A B C D E F G H J K
MA4SW210B-1, MA4SW310B-1
V 3.00
INCHES MIN. MAX. 0.0661 0.0700 0.0484 0.0524 0.0039 0.0059 0.0035 0.0055 0.0115 0.0125 0.0289 0.0299 0.0301 0.0311 0.0288 0.0298 0.0051 REF. 0.0051 REF.
MILLIMETERS MIN. MAX. 1.68 1.78 1.23 1.33 0.100 0.150 0.090 0.140 0.292 0.317 0.735 0.760 0.766 0.791 0.732 0.757 0.129 REF. 0.129 REF.
MA4SW310B-1
DIM. A B C D E F G H J K L M N INCHES MIN. MAX. 0.0697 0.0736 0.0693 0.0732 0.0039 0.0059 0.0310 0.0319 0.0289 0.0299 0.0055 0.0075 0.0035 0.0055 0.0044 0.0064 0.0338 0.0358 0.0632 0.0652 0.0660 0.0680 0.0051 REF. 0.0046 REF. MILLIMETERS MIN. MAX. 1.77 1.87 1.76 1.86 0.100 0.150 0.787 0.812 0.734 0.759 0.140 0.190 0.089 0.139 0.113 0.163 0.859 0.909 1.61 1.66 1.68 1.73 0.129 REF. 0.118 REF.
8 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Visit www.macom.com for additional data sheets and product information.
n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Monolithic Pin Diode Switches w/Integrated Bias Network
MA4SW210B-1, MA4SW310B-1
V 3.00
Equivalent Circuit MA4SW210B-1
Equivalent Circuit MA4SW310B-1
9 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Visit www.macom.com for additional data sheets and product information.
n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020


▲Up To Search▲   

 
Price & Availability of MA4SW310B-1

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X