Part Number Hot Search : 
PT100 EGP30A 7011X7 10X12 MMBT1015 BD379 28M00 AK4364
Product Description
Full Text Search
 

To Download SF1115A Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 SF1115A 199 MHz SAW Filter
* * * * * Designed For GSM BTS Receiver IF Compatible with National Semiconductor Chip Set Very Flexible Impedance Matching Unbalanced or Balanced Input or Output 9.1 x 7.1 mm Version of the SF1115A-1
Characteristic Nominal Center Frequency Passband
Insertion Loss at fc 1 dB Passband Amplitude Ripple over fc 100 kHz Group Delay Variation over fc 100 kHz Rejection fc-800 to fc-600 and fc+600 to fc+800 kHz fc-30 MHz to fc-800 kHz fc+800 kHz to fc+17 MHz fc-80 MHz to fc-30 MHz fc+17 MHz to fc+80 MHz Operating Temperature Range Impedance Matching to 50 unbalanced Impedance Matching to 200 balanced Case Style Lid Symbolization (YY = year, WW = Week) Absolute Maximum Ratings Rating Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Max Soldering Profile
Sym fc IL BW1 GDV
Min
Typ 199.000
Max 7.0
100 0.5 500 20 30 30 35 35 -35
Units MHz dB kHz dBP-P nsP-P dB
Notes 1 1, 2
1, 2, 3
TA
+85
C
1
External L-C External L-C SM9171-10 9.1 x 7.1 mm Nominal Footprint RFM SF1115A YYWW Electrical Connections Connection Terminals Port 1 Hot 10 Port 1 Return 1 Port 2 Hot 5 Port 2 Return 6 Case Ground All Others
Value Units +15 dBm 30 VDC -40 to +85 C 265C for 10 s
Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. 9. (c)Copyright 1999, RF Monolithics Inc. 10. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc.
4347 Sigma Road Dallas, Texas 75244 USA
Phone: +1(972)233-2903 Fax: +1(972)387-8148 e-mail: info@rfm.com Home page: www.rfm.com
European Sales Office
44 1963 251383 44 1963 251510
SF1115A 7/22/1999 R
SF1115A-1 199 MHz SAW Filter
0 dB -20
-40
-60
-80
-100 3 MHz/DIV 0 dB -2
-6
-8
-10 200 kHz/DIV
RF Monolithics, Inc.
4347 Sigma Road Dallas, Texas 75244 USA
Phone: +1(972)233-2903 Fax: +1(972)387-8148 e-mail: info@rfm.com Home page: www.rfm.com
European Sales Office
44 1963 251383 44 1963 251510
SF1115A1p.doc
100 ns/DIV
-4
SM9171-10 Case
10-Terminal Ceramic Surface-Mount Case 9.1 x 7.1 mm Nominal Footprint
Case Dimensions
Dimension A B C D E H P Min 8.86 6.88 mm Nom 9.09 7.11 1.91 0.99 0.79 1.0 2.54 Max 9.40 7.40 2.00 Min 0.349 0.271 Inches Nom 0.358 0.280 0.075 0.039 0.031 0.039 0.100 Max 0.370 0.291 0.079
Electrical Connections
Connection Port 1 Port 2 Input or Return Return or Input Output or Return Return or Output Ground Single Ended Operation Differential Operation Terminals 6 5 1 10 All others Return is ground Return is hot
B
3 2
C H
2
P
3
4
1
1
4
5
10
A
E (10 Places)
10
5
6
9
9
6
(10 Places) D
7 8 8 7
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo and RFM are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com http://www.rfm.com
SM9171-10 100200


▲Up To Search▲   

 
Price & Availability of SF1115A

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X