View 69-23BUMD-TR8_621967.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
Features
Super luminosity white LED. Built in 3 LED chips. Soldering methods: Reflow soldering. High performance. Package in 12mm tape on 7diameter reel. Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 69-23B SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Amusement equipment. Information boards. Flashlight for digital camera of cellular phone. Lighting for small size device.
Device Selection Guide
Chip Emitted Color Material InGaN White Yellow diffused Resin Color
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 1 of 13
Prepared byGiles Ni
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
Package Outline Dimensions
0.85 0.85
(1)
3.3 C L
1.5 0.3
0.85
(2)
0.6 3.3 C L
(5) (6) (3) (4)
0.3
0.6
1.05
2.1
1.05 1.05
(1) (2)
0.625 0.625
0.85
(5)
(6)
1.05
(3)
(4)
0.85 0.85
0.85
Note: The tolerances unless dimension are 0.1mm.
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 2 of 13
Prepared byGiles Ni
0.6
0.625 0.625
0.85
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Electrostatic Discharge (HBM) Power Dissipation Peak Forward Current (Duty 1/10 @ 400ms) Soldering Temperature Symbol VR IF Topr Tstg ESD Pd IFP Tsol Rating 5 30 -25 ~ +80 -40 ~ +90 1000 111 100 Unit V
mA
V mW mA
Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec.
* The value are based on the one-die performance.
Electro-Optical Characteristics (Ta=25)
Parameter Luminous Intensity*1 Viewing Angle*1
Forward Voltage*2 Reverse Current*2
Symbol Iv 21/2 VF IR
Min. 9.1 ----2.7 -----
Typ. 11.0 60 3.3 -----
Max. --------3.7 50
Unit cd deg V A
Condition IF=20mA*2 IF=20mA*2 IF=20mA*2 VR=5V*2
*1 When 3 LED dies are operated simultaneously. *2 For each die.
Note: 1. The products are sensitive to static electricity and care must be fully taken when handling products. 2. Tolerance of Luminous Intensity 11%
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 3 of 13
Prepared byGiles Ni
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
Bin Range of Luminous Intensity
Bin Code Z12 Z21 Z22 Min. 9100 11500 14400 Max. 11500 14400 18000 mcd IF=20mA*2 Unit Condition
Bin Range of Chromaticity Coordinates Rank CCT CIE_x V4 0.329 0.329 0.348 0.347 0.329 0.329 0.347 0.346 0.329 0.329 0.346 0.344 0.329 0.344 0.343 0.329
(IF=20mA*2) CIE_y 0.357 0.369 0.385 0.372 0.345 0.357 0.372 0.359 0.331 0.345 0.359 0.344 0.331 0.344 0.331 0.32
V5 5000K ~5650K V6
V7
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 4 of 13
Prepared byGiles Ni
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
Bin Range of Chromaticity Coordinates Rank CCT CIE_x W4 0.329 0.329 0.315 0.314 0.329 0.316 0.315 0.329 0.329 0.329 0.317 0.316 0.329 0.329 0.318 0.317 0.329 0.329 0.319 0.318 (IF=20mA*2) CIE_y 0.369 0.357 0.344 0.355 0.345 0.333 0.344 0.357 0.345 0.331 0.32 0.333 0.331 0.32 0.31 0.32 0.321 0.31 0.3 0.31
W5
W6
5650K ~6300K
W7
W8
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 5 of 13
Prepared byGiles Ni
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
Bin Range of Chromaticity Coordinates Rank CCT CIE_x X4 0.301 0.314 0.315 0.303 0.305 0.303 0.315 0.316 0.308 0.305 0.316 0.317 0.308 0.317 0.319 0.311 (IF=20mA*2) CIE_y 0.342 0.355 0.344 0.333 0.322 0.333 0.344 0.333 0.311 0.322 0.333 0.320 0.311 0.320 0.300 0.293
X5 6300K ~7000K X6
X7
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 6 of 13
Prepared byGiles Ni
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
*1 When 3 LED dies are operated simultaneously. *2 For each die.
*3 The C.I.E. 1931 chromaticity diagram ( Tolerance 0.01). Note: 1. The products are sensitive to static electricity and care must be fully taken when handling products. 2. Tolerance of Luminous Intensity 11%
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 7 of 13
Prepared byGiles Ni
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 8 of 13
Prepared byGiles Ni
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
Label Explanation
CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank
Pb
EVERLIGHT
RoHS
CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX CAT : XXX HUE : XXX REF : XXX
LOT NO : XXXXXXXXXX
MSL-2
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: The tolerances unless dimension are 0.1mm.
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 9 of 13
Prepared byGiles Ni
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
Carrier Tape Dimensions: Loaded Quantity 1000 pcs. Per Reel
Note: The tolerances unless dimension are 0.1mm.
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 10 of 13
Prepared byGiles Ni
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
Reliability Test Items and Conditions
The reliability of products shall be satisfied with items listed below. Confidence level: 90% LTPD: 10% Test Hours/Cycles 6 Min. 300 cycles 300 cycles 1000 hrs. 1000 hrs. 1000 hrs. 1000 hrs. Sample Qty' 22 pcs. 22 pcs. 22 pcs. 22 pcs. 22 pcs. 22 pcs. 22 pcs.
No. 1 2 3 4 5 6 7
Items Reflow Soldering Temperature Cycle Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
Test Condition Temp.: 2605 Max. 10 sec. H: +100 15min. 5 min. L: -40 15min. H: +100 5min. 10 sec. L: -10 5min. Temp.: 1005 Temp.: -405 IF = 20 mA / 25 855 / 85%RH
Ac/Re 0/1 0/1 0/1 0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 11 of 13
Prepared byGiles Ni
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
Precautions for Use
1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Don't open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment: 605 for 24 hours 3. Soldering Condition 3.1 Pb-free solder temperature profile:
1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 12 of 13
Prepared byGiles Ni
Technical Data Sheet Luminosity white Color LED
69-23BUMD/TR8
4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No.
http://www.everlight.com Prepared date08-Sep.-2009
Rev. 1
Page: 13 of 13
Prepared byGiles Ni

▲Up To Search▲

Price & Availability of 69-23BUMD-TR8

	To Download 69-23BUMD-TR8 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .