 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Features Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain with RoHS compliant version Descriptions The 57-21series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications OA Equipment Backlighting of Full Color LCD Replacement of Conventional Light Bulbs and Fluorescent Lamps Device Selection Guide Chip Lens Color Material AlGaInP Emitted Color Brilliant Red Water Clear Everlight Electronics Co., Ltd. Device No. : DSE-0000692 http://www.everlight.com Prepared date:05-Jan-2009 Rev. 1 Page:1 of 10 Prepared by: Ryan Chen Revision :1 Release Date:2009-05-11 22:09:23.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Package Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000692 http://www.everlight.com Prepared date:05-Jan-2009 Rev. 1 Page:2 of 10 Prepared by: Ryan Chen Revision :1 Release Date:2009-05-11 22:09:23.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Absolute Maximum Ratings (Ta=25 Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature ) Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 60 60 2000 -40 ~ +85 -40 ~+100 Reflow Soldering : 260 Hand Soldering : 350 for 10 sec. for 3 sec. Unit V mA mA mW V Electro-Optical Characteristics (Ta=25 Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current ) Min. 45 --------Typ. ----120 632 ----20 --------Max. 112 --------633.5 ----2.35 10 Unit mcd deg nm nm nm V A Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Symbol Iv 21/2 p d VF IR 617.5 ----1.75 ----- Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0000692 http://www.everlight.com Prepared date:05-Jan-2009 Rev. 1 Page:3 of 10 Prepared by: Ryan Chen Revision :1 Release Date:2009-05-11 22:09:23.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Bin Range of Dominant Wavelength Group Bin Code E4 A E5 E6 E7 Min. 617.5 621.5 625.5 629.5 Max. 621.5 625.5 629.5 633.5 nm IF=20mA Unit Condition Bin Range of Luminous Intensity Bin P1 P2 Q1 Q2 Min 45 57 72 90 Max 57 72 90 112 mcd IF=20mA Unit Condition Bin Range of Forward Voltage Group Bin 0 B 1 2 Min 1.75 1.95 2.15 Max 1.95 2.15 2.35 V IF=20mA Unit Condition Notes: 1. Tolerance of Dominant Wavelength 1nm 2. Tolerance of Luminous Intensity 10% 3.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0000692 http://www.everlight.com Prepared date:05-Jan-2009 Rev. 1 Page:4 of 10 Prepared by: Ryan Chen Revision :1 Release Date:2009-05-11 22:09:23.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Typical Electro-Optical Characteristics Curves Spectrum Distribution Relative luminous intensity (%) 100 75 Ta=25C Forward Current I F (mA) 50 40 30 20 10 Forward Current vs. Forward Voltage Ta=25C 50 25 0 550 600 650 700 Wavelength (nm) 750 0 1.2 1.6 2.0 2.4 2.8 3.0 Forward Voltage VF (V) Relative Luminous Intensity vs. Forward Current Ta=25C Relative luminous intensity (%) 1000 f=1KHz Duty=1/10 Relative Luminous Intensity vs. Ambient Temperature Relative luminous intensity (%) 1000 100 100 10 10 1 -60 -40 -20 0 20 40 60 80 100 10 10 Ambient Temperature T a (C) Forward Current Derating Curve 40 Forward Current IF (mA) 30 1.0 20 10 0.7 0 0 20 40 60 80 100 0.9 0.8 10 10 Forward Current I F (mA) Radiation Diagram 0 10 1 2 10 3 Ta=25C 20 30 40 50 60 70 80 90 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature T a (C) Everlight Electronics Co., Ltd. Device No. : DSE-0000692 http://www.everlight.com Prepared date:05-Jan-2009 Rev. 1 Page:5 of 10 Prepared by: Ryan Chen Revision :1 Release Date:2009-05-11 22:09:23.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT RoHS CAT : XXX HUE : XXX REF : XXX CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000692 http://www.everlight.com Prepared date:05-Jan-2009 Rev. 1 Page:6 of 10 Prepared by: Ryan Chen Revision :1 Release Date:2009-05-11 22:09:23.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Carrier Tape Dimensions: Loaded Quantity 500 pcs Per Reel. Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-0000692 http://www.everlight.com Prepared date:05-Jan-2009 Rev. 1 Page:7 of 10 Prepared by: Ryan Chen Revision :1 Release Date:2009-05-11 22:09:23.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10% No. Items Test Condition 5 Temp. : 260 Min. 5sec. 15min H : +100 5 min 15min L : -40 5min H : +100 10 sec 5min L : -10 Temp. : 100 Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 1 Reflow Soldering 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 0/1 4 1000 Hrs. 22 PCS. 0/1 5 Temp. : -40 1000 Hrs. 22 PCS. 0/1 6 IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 85 / 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-0000692 http://www.everlight.com Prepared date:05-Jan-2009 Rev. 1 Page:8 of 10 Prepared by: Ryan Chen Revision :1 Release Date:2009-05-11 22:09:23.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. or less and 90%RH or less. or less and 60% RH or less. If 2.2 Before opening the package: The LEDs should be kept at 30 2.3 After opening the package: The LED's floor life is 48 hours under 30 unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-0000692 http://www.everlight.com Prepared date:05-Jan-2009 Rev. 1 Page:9 of 10 Prepared by: Ryan Chen Revision :1 Release Date:2009-05-11 22:09:23.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-0000692 http://www.everlight.com Prepared date:05-Jan-2009 Rev. 1 Page:10 of 10 Prepared by: Ryan Chen Revision :1 Release Date:2009-05-11 22:09:23.0 Expired Period: Forever LifecyclePhase: |
Price & Availability of 57-21-R6C-AP1Q2B-BF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |