|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ultrasonic Sensors Compact 18 mm Diameter Digital FEATURES Sensing distance up to 1,5 meters 18 mm diameter housing ORDER GUIDE Sensor Package Style 18 mm dia. PBTB Plastic Sensing Range* mm (in.) 200 - 1500 (7.87 - 59.05) Digital Output PNP, N.O. NPN, N.O. PNP, N.O. NPN, N.O. 150 - 700 (5.9 - 27.5) PNP, N.O. NPN, N.O. PNP, N.O. NPN, N.O. * Standard target is 120 mm square of mild steel perpendicular to ultrasonic beam. 940 Series High power transducer Microprocessor controlled IP 67 sealing High output current Termination Cable Cable Connector cable Connector cable Cable Cable Connector cable Connector cable Catalog Listing 940-F4Y-2D-001-180E 940-F4Y-2D-002-180E 940-F4X-2D-001-180E 940-F4X-2D-002-180E 940-F4Y-2D-001-300E 940-F4Y-2D-002-300E 940-F4X-2D-001-300E 940-F4X-2D-002-300E SPECIFICATIONS www..com940-F4Y-2D-002-180E Max. Sensing Distance Min. Sensing Distance Beam Angle POWER SUPPLY Supply Voltage Supply Current Circuit Protection OUTPUT CHARACTERISTICS Load Current Switching Frequency Hysteresis Repeatability Setpoint Adjustment Circuit Protection ENVIRONMENTAL Operating Temperature Storage Temperature Sealing SPECIAL FEATURES Hold Input Synchronization Input LED Indicator 8 Hz 2% of setpoint <25 mA without load 1500 mm (59.05 in.) 200 mm (7.87 in.) 8 Catalog Listings 940-F4Y-2D-001-180E 940-F4X-2D-001-180E 940-F4X-2D-002-180E 940-F4Y-2D-001-300E 940-F4Y-2D-002-300E 940-F4X-2D-001-300E 940-F4X-2D-002-300E 700 mm (27.5 in.) 150 mm (5.91 in.) 8 19 - 30 VDC <35 mA without load Reverse polarity 0 - 500 mA 25 Hz 2.5% of setpoint 1 mm 4-turn potentiometer Short circuit - 15 to 70C (5 to 158F) - 25 to 85C (- 13 to 185F) IP 67 Stops transmission and reception when input is connected to 0 VDC. Last output will be stored until input is disconnected Avoids mutual interference from several sensors by interconnecting the hold input from each sensor. Illuminates when sensor detects target B82 Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Sensors Compact 18 mm Diameter Digital WIRING DIAGRAM 940 Series 940-F4X/Y-20-001/2-300E Versions only 4-pin DC Micro (M12 x 1) Pin Color 1 BRN 2 PINK 3 BLU 4 BLK *Normal operation with no connection MOUNTING DIMENSIONS (For reference only) 940-F4X/Y-20-001/2-180E 940-F4X/Y-2D-001/2-300E ACCESSORIES www..com Catalog Listing Mounting clamp Beam deflector Focusing beam deflector Straight connector w/o cable Right angle connector w/o cable 24 VDC Power supply, Relay output, 110 VAC input 24 VDC POwer supply, On/Off delay, 110 VAC input 43178389-018 43192871-003 43192871-004 66195044-001 66195045-001 FF-MADB24RB FF-MADC24RB Feature Allows mounting to a flat surface Allows right angle mounting (Approx. dim. 50 x 170 mm) Reduces beam angle by approximately 1/2 (Approx. dim. 35 x 52 mm) Connector has screw terminals for wiring connection Connector has screw terminals for wiring connection See page B102 for more information See page B102 for more information Proximity Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada B83 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Sensors 30 mm Diameter Analog FEATURES Measuring range up to 2000 mm (78.74 in.) High repeatability ORDER GUIDE Sensor Package Style 30 mm dia. Stainless Steel Sensing Range* mm (in.) 300 - 2000 (11.81 - 78.74) 150 - 1200 (5.90 - 47.24) Analog Output 1.5 - 10 V 1.25 - 10 V Termination Cable Cable Connector Catalog Listing 940-A4Y-AD-1C0-130E 940-A4Y-AD-1C0 940-A4V-AD-1C0 940 Series * Standard target is 120 mm square of mild steel perpendicular to ultrasonic beam. SPECIFICATIONS Catalog Listings www..com Max. Sensing Distance Min. Sensing Distance Beam Angle POWER SUPPLY Supply Voltage Supply Current Circuit Protection 940-A4Y-AD-1C0-130E Max. Rate 1000 mm (39.37 in.) 300 mm (11.8 in.) 8 940-A4Y-AD-1C0 940-A4V-AD-1C0 Max. Range 1200 mm (47.2 in.) Max. Rate 600 mm (23.6 in.) 150 mm (5.91 in.) 10 19 - 30 VDC <20 mA without load Reverse polarity 10 mA max. 6 Hz 2 mm <0.2% 4 Turn Potentiometer Max. Range or Max. Rate selected by wiring terminal connection Short Circuit 0 to 50C (32 to 122F) 0 to 70C (32 to 158F) IP 65 11 Hz 1 mm Max. Range 2000 mm (78.74 in.) OUTPUT CHARACTERISTICS Load Current Switching Frequency Repeatability Linearity Output Adjustment Output Mode Circuit Protection ENVIRONMENTAL Operating Temperature Storage Temperature Sealing SPECIAL FEATURES Hold Input Synchronization Input LED Indicator Stops transmission and reception of sensor when input is connected to 0 VDC. Analog output would be zero. Avoids mutual interference from several ultrasonic sensors (external synchronization unit required; see Accessories) Illuminates when sensor detects a target B84 Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Sensors 30 mm Diameter Analog WIRING DIAGRAM 940 Series CONNECTOR VERSION ONLY Pin 1 2 3 4 5 Color BRN WHT BLU BLK GRAY *Normal operation with connection +19-30 VDC MOUNTING DIMENSIONS (For reference only) 940-A4V-AD-1C0 940-A4Y-AD-1C0-130E 940-A4Y-AD-1C0 www..com Proximity ACCESSORIES Catalog Listing Mounting clamp, 30 mm sensor Beam deflector Focusing beam deflector Compact deflector 2 meter cable, Straight connector 5 meter cable, Straight connector 2 meter cable, Right angle connector 5 meter cable, Right angle connector Synchronization unit 43178389-030 43192871-001 43192871-002 66195116-001 RKT5-612/2M RKT5-612/5M RKWT5-612/2M RKWT5-612/5M 55000001 Feature Allows mounting to a flat surface Allows right angle mounting (Approx. dim. 50 x 170 mm) Reduces beam angle by approximately 1/2 Allows right angle mounting (Approx. dim. 35 x 52 mm) Used for wiring to connector version Used for wiring to connector version Used for wiring to connector version Used for wiring to connector version Controls up to 100 sensors Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada B85 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Sensors Compact 30 mm Diameter Analog and Digital, RS232/RS485 Interface FEATURES Programmable RS232 or RS485 interface ORDER GUIDE Sensor Package Style 30 mm dia. Stainless Steel Sensing Range* mm (in.) 300 - 3000 (11.8 - 118) Analog Output 0 - 10 V 4 - 20 mA 0 - 10 V 4 - 20 mA 150 - 1500 (5.9 - 59.1) 0 - 10 V 4 - 20 mA 0 - 10 V 4 - 20 mA 272,1g (9.6 oz) 100 - 600 (3.94 - 23.6) 0 - 10 V Digital Output PNP, N.O./N.C. PNP, N.O./N.C. PNP, N.O./N.C. PNP, N.O./N.C. PNP, N.O./N.C. PNP, N.O./N.C. PNP, N.O./N.C. PNP, N.O./N.C. PNP, N.O./N.C. Catalog Listing 942 Series 0 - 10 VDC/4 - 20 mA output Two N.O. PNP outputs or one N.O. PNP/one N.C. PNP output Interface RS232 RS232 RS485 RS485 RS232 RS232 RS485 RS485 RS232 942-A4N-2D-1C1-130E 942-A4N-2D-1D1-130E 942-A4N-2D-1E1-130E 942-A4N-2D-1F1-130E 942-A4N-2D-1C1-220S 942-A4N-2D-1D1-220S 942-A4N-2D-1E1-220S 942-A4N-2D-1F1-220S 942-A4N-2D-1C1-300E * Standard target is 120 mm square of mild steel perpendicular to ultrasonic beam. www..com SPECIFICATIONS Catalog Listings 942-A4N-2D-1C1-130E 942-A4N-2D-1D1-130E 942-A4N-2D-1E1-130E 942-A4N-2D-1F1-130E 3000 mm (118 in.) 300 mm (11.8 in.) 8 942-A4N-2D-1C1-220S 942-A4N-2D-1D1-220S 942-A4N-2D-1E1-220S 942-A4N-2D-1F1-220S 1500 mm (59.1 in.) 150 mm (5.91 in.) 10 19 - 30 VDC < 30 mA without load Reverse Polarity 0 - 100 mA Programmable (0 - 255 mm) Programmable 5-30 Hz Programmable 5-30 Hz 2 mm or 0.4% of reading Programmable within sensing range Short circuit Programmable 5-30 Hz Programmable 5-30 Hz 2 mm or 0.4% of reading 3 mm or 0.5% Programmable Short circuit - 15 to 70C (5 to 150F - 25 to 85C (- 13 to 185F) IP 65 Stops transmission and reception when input is connected to 0 VDC. Analog output would be zero. Avoids mutual interference from several sensors by interconnecting the Hold input from each sensor. Illuminates when sensor detects target Analog Output: Span, Offset, Positive or Negative slope Digital Output: Hysteresis, N.O./N.C. Programmable 5-50 Hz Programmable 5-50 Hz 942-A4N-2D-1C1-300E 600 mm (23.6 in.) 100 mm (3.94 in.) 8 Max. Sensing Distance Min. Sensing Distance Beam Angle POWER SUPPLY Supply Voltage Supply Current Circuit Protection OUTPUT CHARACTERISTICS (DIGITAL) Load Current Hysteresis Switching Frequency Repeatability Setpoint Adjust Circuit Protection OUTPUT CHARACTERISTICS (ANALOG) Switching Frequency Repeatability Linearity Output Adjust Circuit Protection ENVIRONMENTAL Operating Temperature Storage Temperature Sealing SPECIAL FEATURES Hold Input Synchronization input LED Indicator Programmable Parameters B86 Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Sensors Compact 30 mm Diameter Analog and Digital, RS232/RS485 Interface WIRING DIAGRAM 942 Series *Normal operation with no connection MOUNTING DIMENSIONS (For reference only) www..com Proximity ACCESSORIES Catalog Listing Mounting clamp Beam deflector Focusing beam deflector Compact deflector Programming adapter RS232/RS485 converter 24 VDC Power supply, relay output, 110 VAC input 24 VDC Power supply, On/Off delay, 110 VAC input Software package (disk, manual, cable + 1 sub min D9 connector) Software package (disk, manual, cable + 2 sub min D9 connectors) Straight connector 2 meter cable with straight connector 43178389-030 43192871-001 43192871-002 66195116-001 55000005-002 55000003-001 FF-MADB24RB FF-MADC24RB 55195101-101 55195101-102 66195126-001 55195126-001 Features Allows mounting to flat surface Allows right angle mounting (approx. dim. 50 x 170 mm) Reduces beam angle by approximately 50% Allows right angle mounting (approx. dim. 35 x 52 mm) Allows sensor programming via RS232 interface Converts RS232 interface to RS485 interface See page B102 more information See page B102 more information Allows programming of sensor Allows programming of sensor Used for wiring to connector Used for wiring to connector Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada B87 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Sensors 2-Piece 30 mm Diameter Precision Switching, Analog, Digital BCD, Hexadecimal Outputs FEATURES Background suppression Sensor sealed to IP 65 Amplifier sealed to IP 54 DIN rail mounting ORDER GUIDE Sensor Package Style 30 mm (1.18 in.) Stainless steel sensor head Sensing Range* mm (in.) 150 - 1500 (5.9 - 59.0) Digital Output** Two PNP N.O. or N.C. Multiplex Digital Output BCD/HEX Analog Output 0 - 10 VDC 4 - 20 mA Catalog Listing*** 942 Series Compensated over 0 to 50C (32 to 120F) Amplifier provides analog, digital switching, BCD or hexadecimal outputs 942-M3A-2D-1G1-220S *Standard target: 120 mm thick square of mild steel perpendicular to ultrasonic beam. **N.O./N.C. output selectable ***Includes stainless steel sensor head, cable, straight connector and amplifier. 272g (9.6 oz) www..com SPECIFICATIONS Max. Sensing Distance Min. Sensing Distance Beam Angle POWER SUPPLY Supply Voltage Supply Current Circuit Protection OUTPUT CHARACTERISTICS (DIGITAL) Load Current Hysteresis Switching Frequency Repeatability Setpoint Adjustment Output Adjustment Circuit Protection OUTPUT CHRACTERISTICS (MULTIPLEX DIGITAL) Resolution Information Output Setpoint Adjustment OUTPUT CHARACTERISTICS (ANALOG) Switching Frequency Repeatability Linearity Output Range Adjustment Output Adjustment Min. Load Resistance (VDC) Max. Load Resistance (mA) Slope of Output ENVIRONMENTAL Operating Temperature Storage Temperature Sealing SPECIAL FEATURES LED Indicators Hold Input Synchronization Input RED - Under Range/ RED - Over Range: illumination dependent on analog range chosen and target position with respect to sensor YELLOW - Setpoint: illuminates when target reaches setpoint 1 or setpoint 2 Stops transmission and reception when input is connected to 0 VDC. Last output stored until input is disconnected Avoids mutual interference from several sensors by interconnecting the hold input from each sensor Sensor head: 0 to 70C (32 to 158F)/Amplifier: 0 to 50C (32 to 122F) Sensor head/Amplifier: - 25 to 85C (- 13 to 185F) Sensor Head: IP 65/Amplifier: IP 54 8 Hz 1 mm or 0.2% of reading 2 mm or 0.3% Digital switches Beam angle 10 w/max. sensitivity or beam angle 5 w/min. sensitivity 1000 Ohms (0-10 VDC output) 250 Ohms (4-20 mA output) Positive or Negative via switch 1 mm Bit Parallel/Word Serial Beam angle 10 w/max. sensitivity or beam angle 5 w/min. sensitivity 0-100 mA 1% of setpoint 8 Hz 1 mm or 0.2% of reading Digital switches Beam angle 10 w/max. sensitivity or beam angle 5 w/min. sensitivity Short circuit 19-30 VDC <130 mA without load Reverse polarity 1500 mm (59.1 in.) 150 mm (5.91 in.) 10/5 B88 Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Sensors 2-Piece 30 mm Diameter Precision Switching, Analog, Digital BCD, Hexadecimal Outputs WIRING DIAGRAM PWS 1 19-30 V 2 GND Sensor head 3 19-30 V 4 GND 5 STA 6 STO 942 Series 7 SEN 8 TEM RM CO 9 GND 10 HLD Outputs 11 GND 12 ORA 13 URA 14 SP1 15 SP2 Analog out 16 V 17 GND 18 I Digital out 23 24 25 26 27 28 29 30 103 102 101 100 23 22 21 20 www..com External supply terminals MOUNTING DIMENSIONS (For reference only) 19-30 V supply 0 V line Sensor head terminals +Vs supply voltage 0 V line Signal transmit command Stop signal, echo received Receive sensitivity Temperature sensor Transmit control 0 V line Transmit inhibit, synchronize Switching outputs 0 V line No echo, out of range Under range, target too close Switching output 1 Switching output 2 Analog outputs V out, 0-10 V 0 V line Current out, 4-20 mA Multiplexed digital outputs 1000 decade strobe 100 decade strobe 10 decade strobe 1 decade strobe 8 BCD/HEX 4 BCD/HEX 2 BCD/HEX 1 BCD/HEX Proximity ACCESSORIES Catalog Listing Mounting clamp Beam deflector Focusing beam deflector Compact deflector 43178389-030 43192871-001 43192871-002 66195116-001 Features Allows mounting to flat surface Allows right angle mounting (approx. dim. 50 x 170 mm) Reduces beam angle by approximately 50% Allows right angle mounting (approx. dim. 35 x 52 mm) REPLACEMENT LISTINGS Sensor Head Amplifier Straight Connector (cable not included) 942A4M-2D-K220S 942-M0A-2D-1G1-220S 66195074-001 942 SERIES ULTRASONIC CROSS REFERENCE Obsolete Listing 942-M88 942-M88-LF 942-M3A-2D-1G1 Replacement Listing 942-M96 942-M0A-2D-1G1-220S Comments Sensor head, includes connector Amplifier Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada B89 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Temperature Sensors Platinum RTDs FEATURES Resistance interchangeable Accurate Linear Fast Laser trimmed Bolt, cement-on or strap-on models TYPICAL APPLICATIONS HVAC - room, duct and refrigerant equipment OEM assemblies Electronic assemblies - semiconductor protection, temperature compensation Process control - temperature regulation HRTS Series The HRTS is designed to measure surface temperatures from -200 to +480C (-320 to +900F) in printed circuit, temperature probe, or other applications. HRTS surface temperature sensors are fully assembled elements, ready to use, without the need for fragile splices to extension leads. A thin layer of platinum is deposited on an alumina substrate and laser trimmed to a resistance interchangeability of 0.2% with 0.5C accuracy or 0.1% with 0.3C accuracy. The sensor chip is then glassed, wired and potted or ceramic fired to result in a cylindrical alumina package with either Teflon or fiber glass insulated lead wires. Fig. 1: Wheatstone Bridge 2-Wire Interface www..com ORDER GUIDE HRTS-5760-B HRTS-61 Miniature, ceramic body, 28 ga TFE Teflon insulated leads (2-wire only) Bolt-on, nickel plated copper alloy body, 24 ga fiberglass insulated leads, SST braid, TFE overwrap, spiral armor -T -U 100 , 0.00385 / /C, 3-wire leads, DIN specification 1000 , 0.00375 / /C, 2-wire leads -0 -1 0.2% Resistance Trim (Standard) 0.1% Resistance Trim (Optional) -12 -24 Standard length, HRTS-5760-B Standard length, HRTS-61 Fig. 2: Linear Output Voltage MOUNTING DIMENSIONS (for reference only) HRTS-5760-B Temperature HRTS-61 Fig. 3: Adjustable Point (Comparator) Interface Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada 93 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Temperature Sensors Platinum RTDs FUNCTIONAL BEHAVIOR RT R0(1+AT+BT2-100CT3+CT4) RT Resistance ( ) at temperature T (C) R0 Resistance ( ) at 0C T Temperature in C A + B - CT<0 100 1002 CONSTANTS Alpha, (C-1) 0.00375 0.000029 1.605 0.009 0.16 3.81x10 -3 HRTS Series ACCURACY VS TEMPERATURE HRTS platinum RTDs are available in two base resistance trim tolerances: 0.2% or 0.1%. The corresponding resistance interchangeability and temperature accuracy for these tolerances are: Tolerance Temperature (C) -200 0.003850 0.000010 1.4999 0.007 0.10863 3.908x10 -3 - 1004 Standard 0.2% R* () 6.8 2.9 2.0 2.9 5.6 8.2 11.0 12.5 15.1 T (C) 1.6 0.8 0.5 0.8 1.6 2.4 3.2 4.0 4.8 RTD. Optional 0.1% R* () 5.1 2.4 1.0 2.2 4.3 6.2 8.3 9.6 10.4 T (C) 1.2 0.6 0.3 0.6 1.2 1.8 2.5 3.0 3.3 -100 0 100 200 300 400 500 600 *1000 -12 Delta, (C) Beta, A (C ) -1 (C) B (C-2) C (C ) -4 -6.02x10-7 -6.0x10 -12 -5.775x10-7 -4.183x10 Both 0 and C 0 for www..com T>0C RESISTANCE VS TEMPERATURE CURVE RTD. Divide R by 10 for 100 CAUTION PRODUCT DAMAGE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take normal ESD precautions when handling this product. SPECIFICATIONS Sensor Type Temperature Range Temperature Accuracy Time Constant, 1/e Operating Current Self-Heating Lead Material Thin film platinum RTD: Ro 1000 @ 0C; alpha 0.00375 / /C Ro 100 @ 0C; alpha 0.00385 / /C HRTS-5760-B: -200 to +260C (-320 to +500F) HRTS-61: -75 to +425C (-100 to +800F) 0.5C or 0.8% of temperature @ 0.2% Ro Trim 0.3C or 0.6% of temperature @ 0.1% Ro Trim Optional HRTS-5760-B: Typically 0.6 sec. on metal surfaces HRTS-61: Typically 20 sec. On metal surfaces 2 mA max. for self-heating errors of 1C 1 mA recommended 0.3 mW/C Nickel coated stranded copper, Teflon or Fiberglass insulated 94 Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Sensors Precision Digital 18 mm Diameter FEATURES Background suppression Sealed to IP 65 Fixed or adjustable setpoint control ORDER GUIDE Sensor Package Style 18 mm dia. Plastic Sensing Range* mm (in.) 100 - 500 (3.9 - 19.68) 100 - 200 (3.9 - 7.87) 200 - 500 (7.87 - 19.68) 90,7 g (3.2 oz.) 18 mm dia. Stainless Steel 70 - 180 (2.76 - 7.09) 100 - 500 (3.9 - 19.68) 100 - 200 Setpoint adjustment within sensing range (3.9 - 7.87) Setpoint adjustment within sensing range Setpoint adjustment within sensing range Setpoint adjustment within sensing range Fixed @ 200 mm (7.87 in.) 20 mm** Output Type PNP, N.O. NPN, N.O. PNP, N.O. NPN, N.O. PNP, N.O. PNP, N.O. PNP, N.O. NPN, N.O. PNP, N.O. NPN, N.O. Catalog Listing 945 Series Temperature compensation over 0 to 50C (32 to 122F) Inhibit/synchronization input Stainless steel or plastic housings Setpoint Fixed @ 400 mm (15.75 in.) 20 mm** 945-F4Y-AD-001 945-F4Y-AD-002 945-N4Y-AD-001 945-N4Y-AD-002 945-F4Y-AD-001-180E 945-F4Y-AD-001-300E 945-L4Y-AD-001 945-L4Y-AD-002 945-S4Y-AD-001 945-S4Y-AD-002 www..com 136 g (4.8 oz.) * Standard target is 120 mm square of mild steel perpendicular to ultrasonic beam. **External setpoint adjustment wiring possible. SPECIFICATIONS SENSING CHARACTERISTICS Catalog Listings 945-F4Y-AD-001 945-F4Y-AD-002 945-L4Y-AD-001 945-L4Y-AD-002 500 mm (19.66 in.) 100 mm (3.9 in.) 10 945-N4Y-AD-001 945-N4Y-AD-002 945-S4Y-AD-001 945-S4Y-AD-002 200 mm (7.87 in.) 100 mm (3.9 in.) 10 945-F4Y-AD-001-180E 945-F4Y-AD-001-300E Max. Sensing Distance Min. Sensing Distance Beam Angle POWER SUPPLY Supply Voltage Supply Current Circuit Protection 500 mm (19.66 in.) 200 mm (7.87 in.) 8 19 - 30 VDC 180 mm (7.09 in.) 70 mm (2.76 in.) 8 <30 mA without load <25 mA without load Reverse polarity 0 - 100 mA 10 mm OUTPUT CHARACTERISTICS Load Current Hysteresis Switching Frequency Repeatability Setpoint Adjustment Circuit Protection ENVIRONMENTAL Operating Temperature Storage Temperature Sealing SPECIAL FEATURES Hold Input Synchronization Input LED Indicator Stops transmission and reception when input is connected to 0 VDC. Last output will be stored until input is disconnected Avoids mutual interference from several sensors. (External synchronization unit is required. See Accessories) Illuminates when sensor detects target 0 to 50C (32 to 122F) 0 to 70C (32 to 150F) IP 65 30 Hz 0.5 mm or 0.3% or reading (Fixed or External Circuit) or 4 Turn Potentiometer Short Circuit 60 Hz 25 Hz 60 Hz 0.2 mm or 0.2% or reading B90 Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Sensors Precision Digital 18 mm Diameter WIRING DIAGRAMS 945-F/N Series 945-L/S Series 945 Series *Normal operation with no connection MOUNTING DIMENSIONS (For reference only) 945-F/N Series plastic Housing *Normal operation with no connection 945-L/S Series Stainless Steel Housing www..com Proximity ACCESSORIES Catalog Listing 24 VDC Power supply, relay output, 110 VAC input 24 VDC Power supply, ON/OFF delay, 110 VAC input Synchronization unit Mounting clamp, 18 mm housing Beam deflector Focusing beam deflector FF-MADB24RB FF-MADC24RB 55000001 43178389-018 43192871-003 43192871-004 Features See page B102 for more information See page B102 for more information Controls up to 100 sensors Allows mounting to a flat surface Allows right angle mounting (approx. dim. 50 x 170 mm) Reduces beam angle by approximately 50% Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada B91 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Sensors Precision Analog 18 mm Diameter FEATURES Background suppression Sealed to IP 65 Adjustable sensitivity ORDER GUIDE Sensor Package Style 18 mm dia. Plastic Sensing Range* mm (in.) 150 - 600 (5.9 - 23.6) 60 - 200 (2.36 - 7.87) Analog Output 1.5 - 6 V 1.8 - 6 V Catalog Listing 945 Series Temperature compensation over 0 to 50C (32 to 122F) Inhibit/synchronization input Stainless steel or plastic housings 945-F4Y-AD-1C0-180E 945-F4Y-AD-1C0-300E 90,7 g (3.2 oz.) 18 mm dia. Stainless Steel 100 - 600 (3.9 - 23.6) 1-6V 945-L4Y-AD-1C0 www..com 136 g (4.8 oz.) 18 mm dia. Plastic with Stainless Steel or Plastic External Head 150 - 600 (5.9 - 23.6) 30 - 150 (1.18 - 5.9) 1.5 - 6 V 945-E3Y-AD-1C0-180E (M18 x 1 stainless steel sensor head) 945-G3Y-AD-1C0-300E (M12 x 1 plastic sensor head) 0.9 - 4.5 V SPECIFICATIONS Catalog Listings Min. Sensing Distance Beam Angle POWER SUPPLY Supply Voltage Supply Current Circuit Protection OUTPUT CHARACTERISTICS Load Current Switching Frequency Repeatability Linearity Output Adjustment Circuit Protection ENVIRONMENTAL Operating Temperature Storage Temperature Sealing SPECIAL FEATURES Hold Input Synchronous Input LED Indicator Stops transmission and reception of sensor when input is connected to 0 VDC. Analog output would be zero VDC Avoids mutual interference from several ultrasonic sensors (external synchronization unit is required; see accessories) Illuminates when sensor detects a target 0 to 50C (32 to 122F) 0 to 70C (32 to 158F) IP 65 10 Hz 20 Hz 10 Hz < 0.3% of reading <0.2% 4 turn potentiometer Short Circuit 10 mA max. 10 Hz 20Hz 19 - 30 VDC <20 mA without load Reverse polarity 945-F4Y-AD-1C0-180E 945-F4Y-AD-1C0-300E 945-L4Y-AD-1C0 200 mm (7.87 in.) 60 mm (2.36 in.) 8 600 mm (23.6 in.) 100 mm (3.9 in.) 10 150 mm (5.9 in.) 8 945-E3Y-AD-1C0-180E 945-G3Y-AD-1C0-300E 600 mm (23.6 in.) 150 mm (5.9 in.) 8 150 mm (5.9 in.) 30 mm (1.18 in.) 8 Max. Sensing Distance 600 mm (23.6 in.) B92 Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Sensors Precision Analog 18 mm Diameter WIRING DIAGRAMS 945-F/L, 945-E/G Series 945 Series *Normal operation with connection to 19-30 VDC MOUNTING DIMENSIONS (For reference only) 945-F/L Series Housing 945-E/G Series with External Head www..com Proximity ACCESSORIES Catalog Listing Synchronization unit Mounting clamp, 18 mm housing Beam deflector Focusing beam deflector 55000001 43178389-018 43192871-003 43192871-004 Features Controls up to 100 sensors Allows mounting to flat surface Allows right angle mounting (approx. dim. 50 x 170 mm) Reduces beam angle by approximately 50% Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada B93 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 94X Series (942-O4N-2D-1A1/1A2-80E, 943-O4V-2D-001/002/1C0/1D0-80E, 947-O4V-2D-1C0/1D0-80E) www..com Ultrasonic Distance Sensors DESCRIPTION This collection of ultrasonic devices offers enhanced sensing range capability in a square plastic housing. Available sensor types include programmable, Teach-In, and analogue and fixed output versions. FEATURES * * * * Non contact distance sensing for use in non invasive measurement Reduced sensitivity to light intensity/reflectivity/opacity of target for enhanced flexibility and certainty of measurement Detects over much longer distance than other detection methods reducing the need for close proximity to the target Extremely long sensing distance (up to 6 m [19.65 ft]) reducing the need for close proximity measurement which can be critical for some applications * * * POTENTIAL APPLICATIONS Level measurement Presence/absence detection Distance measurement Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 943 Series (942-O4N-2D-1A1/1A2-80E, 943-O4V-2D-001/002/1C0/1D0-80E, 947-O4V-2D-1C0/1D0-80E) Specifications Parameter Max. sensing distance Min. sensing distance Expected response time 90% of final value Beam angle Switching frequency Linearity error Hysteresis Repeatability of measured distance Temperature range Temperature compensation Operating voltage Expected current consumption Analogue output www..com by Analogue output selection load Switching outputs Expected output current Adjustment Alignment LED Status switching output 1 Status switching output 2 Control input Inhibit connect to: Synchronisation connect to: Enable connect to: Interface Plastic housing Sealing* Connector 942-O4N-2D1A1-80E 942-O4N-2D1A2-80E 943-O4V-2D001-80E 943-O4V-2D002-80E 943-O4V-2D1C0-80E 943-O4V-2D1D0-80E 6000 mm [236.22 in] 600 mm [23.62 in] - 8 0.5 Hz - ~1% - 947-O4V-2D947-O4V-2D1C0-80E 1D0-80E 5000 mm [196.85 in] 500 mm [19.69 in] 400 ms 10 7 Hz/prog <0.5 % - 0.2% 2 mm [0.08 in] 0.2% 250 ms/prog 700 ms 7 Hz/prog <0.3% prog 0.2% 15 Vdc to 30 Vdc 100 mA 0 V to 10 V/4 mA to 20 mA load >2 kOhm Uout load <500 Ohm Iout 2 PNP NO/NC 2 NPN NO/NC 2 PNP NO/NC 2 NPN NO/NC 100 mA max. 500 mA max. programming Teach-In green (1) yellow (2) yellow (3) - Pin 6 0 V Pin 6 Pin 6 Pin 6 NC RS232 PBPT IP65 8 pin M16x0.75 -15 C to 70 C [-5 F to 158 F] yes 12 Vdc to 30 Vdc 15 Vdc to 30 Vdc <80 mA <35 mA - 0 V to 10 V 4 mA to 20 mA - - - - 24 Vdc 20% <40 mA 0 V to 10 V 4 mA to 20 mA - - Pin 2 0 V Pin 2 Pin 2 Pin 2 NC - 5 pin M12x1 *Attention! Do not expose sensor head to hot water >50 C or steam vapour. Accessories: 942-O4N-2D-1A1/1A2-80E Catalog Listing Description 66195126-001 Mating connector straight 55000005-002 Programming adaptor 55000010-001 Software programming adaptor and PC connection cable 55000018-001 Programming cable Accessories: 943-O4V-2D-001/002-80E, 943-O4V-2D-1C0/1D0-80E, 947-O4V-2D-1C0/1D0-80E Catalog Listing Description 66195044-001 Mating connector straight 66195045-001 Mating connector angled 66195214-001 Straight cable/connector 2 m 66195216-001 Right-angle cable/connector 2 m 2 www.honeywell.com/sensing Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Distance Sensors Mounting Dimensions (For reference only. mm/[in]) 942-O4N-2D-1A1/1A2-80E 943-O4V-2D-001/002/1C0/1D0-80E, 947-O4V-2D-1C0/1D0-80E www..com Wiring P42-O4N-2D-1A1/1A2-80E View to solder pins of connector Pin 1: + 24 Vdc 5 3 7 2 8 6 4 1 943-O4V-2D-001-80E Pin 1 Pin 5 Pin 4 Pin 2 Switching output SP1 Switching output SP2 +24 Vdc Teach-In Pin 2: GND Pin 3: U/I Pin 4: SP1 Pin 5: SP2 Pin 6: Hld/Sync Pin 7: RxD Pin 8: TxD 4 5 R R 1 3 2 Pin 3 0V 943-O4V-2D-002-80E Pin 1 Pin 2 Pin 4 Pin 5 Switching output 2 Switching output 1 Teach-In Load Load 943-O4V-2D-1C0/1D0-80E +24 Vdc Pin 1 +24 V Analogue 4 5 1 3 2 4 5 1 3 2 Pin 4 Pin 5 Pin 3 Teach-In 0 V/GND Pin 3 0V 947-O4V-2D-1C0/1D0-80E Pin 1 Pin 4 +24 Vdc 947-O4V-2D-1C0-80E 10 V 947-O4V-2D-1D0-80E 20 mA Analogue output 4 Pin 2 Enable Synchronisation Inhibit 3 2 0V 500 mm 5000 mm 4 mA 500 mm 5000 mm 1 Pin 3 0V Honeywell Sensing and Control 3 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Detection Range 942-O4N-2D-1A1/1A2-80E, 943-04V-2D-001/002/1C0/1D0-80E +1000 mm -1000 0 600 mm 6000 947-04V-2D-1C0/1D0-80E +600 mm -600 0 500 mm 5000 Enhanced detection of a target 100 mm x 100 mm Possible detection of a large target Enhanced detection of a target 100 mm x 100 mm Possible detection of a large target WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply www..com with these instructions could result in death or serious injury. * WARNING MISUSE OF DOCUMENTATION The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. * Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Phone and Fax: Asia Pacific Europe +65 6355-2828 +65 6445-3033 Fax +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: info.sc@honeywell.com Internet: www.honeywell.com/sensing Automation and Control Solutions Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 www.honeywell.com/sensing 004451-1-EN IL50 GLO Printed in USA February 2006 Copyright (c) 2006 Honeywell International Inc. All rights reserved. Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 943 Series Ultrasonic Distance Sensors The new 943 series industrial sensors are the latest addition to our product range. They have improved scanning ranges, remote teach in of the switching or analog outputs, as well as new advanced features, such as window and hysteresis modes. OPTIONS AND ORDER GUIDE 2 switching outputs PNP NO and NPN NO Beam angle: Supply voltage: Sealing: 8 12 to 30 V IP67 Analogue voltage output 0-10 V and 4-20 mA Beam angle: Supply voltage: Sealing: 8 15 to 30 V IP67 M30 CONNECTOR M30 11,2 M30 Housing: M30 x 1,5 mm plastic (PBTB) Max. sensing distance: 3500 mm Min. sensing distance: 300 mm Response time: 400 ms Repeatability: 0,2 % or 2 mm OUTPUT 0-10 V 0-10 V 4-10 mA 4-20 mA TERMINATION Connector Cable Connector Cable REFERENCE 943-T4V-2D-1C0-130E 943-T4Y-2D-1C0-130E 943-T4V-2D-1D0-130E 943-T4Y-2D-1D0-130E www..com 5,0 M30 x 1,5 Housing: M30 x 1,5 mm plastic (PBTB) Max. sensing distance: 3500 mm Min. sensing distance: 300 mm Switching frequency: 1.0 Hz Repeatability: 0,2 % or 2 mm OUTPUT PNP, 2 NO/NC PNP, 2 NO/NC NPN, 2 NO/NC NPN, 2 NO/NC TERMINATION Connector Cable Connector Cable REFERENCE 943-T4V-2D-001-130E 943-T4Y-2D-001-130E 943-T4V-2D-002-130E 943-T4Y-2D-002-130E CABLE 123,5 0,5 90 0,5 5,0 M30 x 1,5 2000 100 M18 M18 CONNECTOR M18 Housing: M18 x 1,0 mm plastic (PBTB) Max. sensing distance: 2000 mm Min. sensing distance: 200 mm Switching frequency: 250 ms Repeatability: 0,2 % or 2 mm OUTPUT 0-10 V 0-10 V 4-10 mA 4-20 mA TERMINATION Connector Cable Connector Cable REFERENCE 943-F4V-2D-1C0-180E 943-F4Y-2D-1C0-180E 943-F4V-2D-1D0-180E 943-F4Y-2D-1D0-180E Housing: M18 x 1,0 mm plastic (PBTB) Max. sensing distance: 2000 mm Min. sensing distance: 200 mm Switching frequency: 1.2 Hz Repeatability: 0,2 % or 2 mm OUTPUT PNP, 2 NO/NC PNP, 2 NO/NC NPN, 2 NO/NC NPN, 2 NO/NC TERMINATION Connector Cable Connector Cable REFERENCE 943-F4V-2D-001-180E 943-F4Y-2D-001-180E 943-F4V-2D-002-180E 943-F4Y-2D-002-180E 3,5 CABLE Max. sensing distance: Min. sensing distance: Switching frequency: Repeatability: OUTPUT PNP, 2 NO/NC PNP, 2 NO/NC NPN, 2 NO/NC NPN, 2 NO/NC TERMINATION Connector Cable Connector Cable 800 mm 100 mm 4.7 Hz 0,2 % or 1 mm REFERENCE 943-F4V-2D-001-300E 943-F4Y-2D-001-300E 943-F4V-2D-002-300E 943-F4Y-2D-002-300E Max. sensing distance: Min. sensing distance: Switching frequency: Repeatability: OUTPUT 0-10 V 0-10 V 4-10 mA 4-20 mA TERMINATION Connector Cable Connector Cable 800 mm 100 mm 100 ms 0,2 % or 1 mm REFERENCE 943-F4V-2D-1C0-300E 943-F4Y-2D-1C0-300E 943-F4V-2D-1D0-300E 943-F4Y-2D-1D0-300E M18/M30 Termination: Connector Cable M12 x 1 Preleaded 2 m Max. sensing distance: Min. sensing distance: Switching frequency: Repeatability: OUTPUT PNP, 2 NO/NC PNP, 2 NO/NC NPN, 2 NO/NC NPN, 2 NO/NC TERMINATION Connector Cable Connector Cable 500 mm 60 mm 4.7 Hz 0,2 % or 1 mm REFERENCE 943-F4V-2D-001-330E 943-F4Y-2D-001-330E 943-F4V-2D-002-330E 943-F4Y-2D-002-330E Max. sensing distance: Min. sensing distance: Switching frequency: Repeatability: OUTPUT 0-10 V 0-10 V 4-10 mA 4-20 mA TERMINATION Connector Cable Connector Cable 500 mm 60 mm 100 ms 0,2 % or 1 mm REFERENCE 943-F4V-2D-1C0-330E 943-F4Y-2D-1C0-330E 943-F4V-2D-1D0-330E 943-F4Y-2D-1D0-330E ! WARNING MISUSE OF DOCUMENTATION * The information presented in this product sheet (or catalogue) is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. ! WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Sales and Service Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorised Distributor, contact your local sales office or: INTERNET: www.honeywell.com/sensing E-mail: info.sc@honeywell.com ASIA PACIFIC Control Products Asia Pacific Headquarters Phone: +(65) 6355-2828 FAX: +(65) 6445-3033 Australia Honeywell Limited Phone: +(61) 2-9370-4500 FAX: +(61) 2-9370-4525 Toll Free 1300-36-39-36 Toll Free Fax: 1300-36-04-70 China - PRC - Beijing Honeywell China Inc. Phone: +(86-10) 8458-3280 FAX: +(86-10) 8458-3102 China - PRC - Shanghai Honeywell China Inc. Phone: (86-21) 6237-0237 FAX: (86-21) 6237-1237 China - Hong Kong S.A.R. Honeywell Ltd. Phone: +(852) 2953-6412 FAX: +(852) 2953-6767 Indonesia Honeywell Indonesia Pte Ltd. Phone: +(62) 21-535-8833 FAX: +(62) 21-5367 1008 India TATA Honeywell Ltd. Phone: +(91) 20 6870 445/446 FAX: +(91) 20 681 2243/ 687 5992 Japan Honeywell Inc Phone: +(81) 3 5440 1425 FAX: +(81) 3 5440 1368 South Korea Honeywell Korea Co Ltd Phone: +(822) 799-6167 FAX: +(822) 792-9013 Malaysia Honeywell Engineering Sdn Bhd Phone: +(60-3) 7958-4988 FAX: +(60-3) 7958-8922 New Zealand Honeywell Limited Phone: +(64-9) 623-5050 FAX: +(64-9) 623-5060 Toll Free (0800) 202-088 Philippines Honeywell Systems (Philippines) Inc. Phone: +(63-2) 636-1661/1662 FAX: +(63-2) 638-4013 Singapore Honeywell South East Asia Phone: +(65) 6355-2828 FAX: +(65) 6445-3033 Thailand Honeywell Systems (Thailand) Ltd. Phone: +(662) 693-3099 FAX: +(662) 693-3085 Taiwan R.O.C. Honeywell Taiwan Ltd. Phone: +(886-2) 2245-1000 FAX: +(886-2) 2245-3241 EUROPE Austria Honeywell Austria GmbH Phone: +(43) 1 727 80 366/246 FAX: +(43) 1 727 80 337 Belgium Honeywell SA/NV Phone: +(32) 2 728 2522 FAX: +(32) 2 728 2502 Bulgaria Honeywell EOOD Phone: +(359) 2 979 00 23 FAX: +(359) 2 979 00 24 Czech Republic Honeywell spol. s.r.o. Phone: +(420) 242 442 111 FAX: +(420) 242 442 182 Denmark Honeywell A/S Phone: +(45) 39 55 55 55 FAX: +(45) 39 55 55 58 Finland Honeywell OY Phone: +(358) 9 3480101 FAX: +(358) 9 34801375 France Honeywell SA Phone: +(33) 1 60 19 80 40 FAX: +(33) 1 60 19 81 73 Germany Honeywell AG Phone: +(49) 69 8064 444 FAX: +(49) 69 8064 442 Hungary Honeywell Kft. Phone: +(361) 451 43 00 FAX: +(361) 451 43 43 Italy Honeywell S.p.A. Phone: +(39) 02 92146 450/456 FAX: +(39) 02 92146 490 The Netherlands Honeywell B.V. Phone: +(31) 20 565 69 11 FAX: +(31) 20 565 66 00 Norway Honeywell A/S Phone: +(47) 66 76 20 00 FAX: +(47) 66 76 20 90 Poland Honeywell Sp. zo.o Phone: +(48) 606 09 64 FAX: +(48) 606 09 01 Portugal Honeywell Portugal Lda Phone: +(351 21) 424 50 00 FAX: +(351 21) 424 50 99 Romania Honeywell Bucharest Phone: +(40) 21 231 64 37/38 FAX: +(40) 21 231 6439 Commonwealth of Independent States (CIS) Z.A.O. Honeywell Phone: +(7 095) 796 98 36 FAX: +(7 095) 797 99 06 Slovak Republic Honeywell s.r.o. Phone: +(421 2) 58 247 403 FAX: +(421 2) 58 247 415 South Africa (Republic of) Honeywell Southern Africa Honeywell S.A. Pty. Ltd Phone: +(27) 11 695 8000 FAX +(27) 11 805 1504 Spain Honeywell S.A. Phone: +(34) 91 313 6100 FAX: +(34) 91 313 6129 Sweden Honeywell AB Phone: +(46) 8 775 55 00 FAX: +(46) 8 775 56 00 Switzerland Honeywell AG Phone: +(41) 1 855 24 40 FAX: +(41) 1 855 24 45 Turkey Honeywell Turkey A.S. Phone: +(90) 216 5756620 FAX: +(90) 216 5756637 Ukraine Honeywell Phone: +(380) 44 201 44 74 FAX: +(380) 44 201 44 75 United Kingdom Honeywell Control Systems Ltd Phone: +(44) 1698 481481 FAX: +(44) 1698 481676 Mediterranean & African Distributors Honeywell SpA Phone: +(39) 2 921 46 232 FAX: +(39) 2 921 46 233 Middle East Headquarters Honeywell Middle East Ltd. Phone: +(9712) 443 2119 FAX +(9712) 443 2536 NORTH AMERICA USA/Canada Honeywell Sensing and Control Phone: 1-800-537-6945 1-815-235-6847 FAX: 1-815-235-6545 E-mail: info.sc@honeywell.com www..com LATIN AMERICA Honeywell Latin America Headquarters Phone: 1-305-805-8188 FAX: 1-305-883-8257 Argentina Honeywell S.A.I.C. Phone: +(54-11) 4383-3627 FAX: +(54-11) 4325-6470 Brazil Honeywell Do Brasil & Cia Phone: +(55-11) 4166-1900 FAX: +(55-11) 4166-1901 Chile Honeywell Chile, S.A. Phone: +(56-2) 425-8400 FAX: +(56-2) 425-8410 Mexico Honeywell S.A. de C.V. Phone: +(52) 55 5081-0200 FAX: +(52) 55 5081-0202 Puerto Rico, Caribbean Honeywell Inc. Phone: +(787) 792-7075 FAX: +(787) 792-0053 Venezuela Honeywell C.A. Phone: +(58-212) 273-0511 FAX: +(58-212) 273-0599 This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is the customer's responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are available on request. Copyright 2004 Honeywell International Inc. All Rights Reserved. Sensing and Control www.honeywell.com/sensing Honeywell Control Systems Ltd Newhouse Industrial Estate Motherwell, Lanarkshire ML1 5SB Scotland, UK 100464-EN Issue 1 02/04 UK07 GLO Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com www..com 943 Series (943F4V/F4Y-2D001/002/1C0/1D0-360E) Ultrasonic Distance Sensors DESCRIPTION The new 943-F4V (connector) and 943-F4Y (cable) Series industrial sensors are the latest additions to our range of ultrasonic distance sensors. They offer improved scanning ranges and remote Teach-In of the switching or analog outputs, in addition to new, advanced features, such as Window and Hysteresis modes. The devices are Teach-In compatible and have an M18 plastic housing. FEATURES * * * * Non contact distance sensing for use in non invasive measurement Reduced sensitivity to light intensity/reflectivity/opacity of target for enhanced flexibility and certainty of measurement Detects over much longer distance than other detection methods reducing the need for close proximity to the target Presence absence, tank fill level and diameter measurement provides an extremely robust and flexible measurement method * * * * * * POTENTIAL APPLICATIONS Reel diameter measurement Tank level measurement Presence/absence of an object Loop control Product height measurement Tire manufacturing * Short distance (in ultrasonic terms) for enhanced accuracy, repeatability (material independent) measurement to 30 mm [1.18 in]. * Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 943 Series (943-F4V/F4Y-2D-001/002/1C0/1D0-360E) Specifications Parameter 943-F4V-2D001-360E 943-F4V-2D002-360E 943-F4V-2D1C0-360E Max. sensing distance Min. sensing distance Expected response - 60 ms time 90% of final value Beam angle 8 Switching frequency 15 Hz - 15 Hz - Linearity error - <0.5% - <0.5% Hysteresis 1% - 1% - Repeatability of 1 mm [0.039 in] 0.2% measured distance Temperature range -15 C to 70 C [-5 F to 158 F] Temperature yes compensation Operating voltage 12 Vdc to 30 Vdc 15 Vdc to 30 Vdc 12 Vdc to 30 Vdc 15 Vdc to 30 Vdc Possible min. supply - 12 Vdc - 12 Vdc Expected current <80 mA <40 mA <80 mA <40 mA www..com consumption Output 2X PNP NO/NC 2X NPN NO/NC 0 V to 10 V 4 mA to 20 mA 2X PNP NO/NC 2X NPN NO/NC 0 V to 10 V 4 mA to 20 mA Expected output 500 mA max. - 500 mA max. - current Adjustment set point Teach-In - Teach-In - Teach-In input pin 5 pink wire - Teach-In - Teach-In Sensitivity Teach-In: P1/P2 determines output position Plastic housing PBPT M18x1 Sealing* IP65 Connector M12x1 - Cable connection - 2 m [6.56 ft] 943-F4V-2D943-F4Y-2D- 943-F4Y-2D1D0-360E 001-360E 002-360E 400 mm [15.75 in] 30 mm [1.18 in] 60 ms - 943-F4Y-2D1C0-360E 943-F4Y-2D1D0-360E *Attention! Do not expose sensor head to hot water >50 C or steam vapour. Accessories: 943-F4V-2D-001/002/1CO/1DO-360E Catalog Listing Description 66195044-001 Mating connector straight 66195045-001 Mating connector angled 66195214-001 Straight cable/connector 2 m 66195216-001 Right-angle cable/connector 2 m 43178389-018 Mounting clamp 43192871-003 Beam deflector 43192871-004 Focusing beam deflector Accessories: 943-F4Y-2D-001/002/1CO/1DO-360E Catalog Listing Description 43178389-018 Mounting clamp 43192871-003 Beam deflector 43192871-004 Focusing beam deflector 2 www.honeywell.com/sensing Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Distance Sensors Mounting Dimensions Continued (For reference only. mm/[in]) 943-F4V-2D-001/002/1C0/1D0-360E 943-F4Y-2D-001/002/1C0/1D0-360E www..com Wiring 943-F4V-2D-001-360E Pin 1 Pin 5 Pin 4 Pin 2 Switching output SP1 Switching output SP2 943-F4V-2D-002-360E +24 Vdc Teach-In Pin 1 +24 Vdc R Pin 4 Switching output SP1 R 4 5 1 3 2 4 5 R R 1 3 2 Pin 2 Pin 5 Switching output SP2 Teach-In 0V Pin 3 0V Pin 3 943-F4V-2D-1C0/1D0-360E Pin 1 Pin 4 Pin 5 Pin 3 +24 V Analogue 943-F4Y-2D-001/002-360E Brown +24 Vdc 4 5 1 3 2 Black SP1 RR Teach-In 0 V/GND Grey SP2 Pink Blue Teach-In 0V 943-F4Y-2D-1C0/1D0-360E Brown Black Pink Blue Detection Range +24 V Analogue Teach-In 0 V/GND +130 mm -130 0 30 mm 400 Enhanced detection of a target 100 mm x 100 mm Possible detection of a large target Honeywell Sensing and Control 3 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. * * WARNING MISUSE OF DOCUMENTATION The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: info.sc@honeywell.com Internet: www.honeywell.com/sensing Phone and Fax: Asia Pacific Europe +65 6355-2828 +65 6445-3033 Fax +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax www..com sole remedy and is in lieu of all other foregoing is buyer's Automation and Control Solutions Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 61032 www.honeywell.com/sensing 004452-1-1-EN IL50 GLO Printed in USA February 2006 Copyright (c) 2006 Honeywell International Inc. All rights reserved. Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 943 Series (943-G4V2G-001/002-400E) Ultrasonic Distance Sensors www..com DESCRIPTION The new 943-G4V series industrial sensors are the latest addition to our range of ultrasonic distance sensors. They offer improved scanning ranges and remote Teach-In of the switching or analogue outputs, in addition to new, advanced features, such as Window and Hysteresis modes. The devices are Teach-In compatible and have an M12 stainless steel housing for the 943 G4V. FEATURES * * * * Non contact distance sensing for use in non invasive measurement Reduced sensitivity to light intensity/reflectivity/opacity of target for enhanced flexibility and certainty of measurement Detects over much longer distance than other detection methods reducing the need for close proximity to the target Short distance (in ultrasonic terms) for accuracy, repeatability (material independent) measurement to 25 mm [0.98 in]. * * * * * * POTENTIAL APPLICATIONS Reel diameter measurement Tank level measurement Presence/absence of an object Loop control Product height measurement Tire manufacturing Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 943 Series (943-G4V-2G-001/002-400E) Specifications Parameter 943-G4V-2G-001-400E 943-G4V-2G-002-400E Max. sensing distance 250 mm [9.84 in] Min. sensing distance 25 mm [0.98 in] Switching frequency 30 Hz Hysteresis 1% Beam angle 8 Repeatability 0,3 mm [0.012 in] Temperature range -20 C to 70 C [-4 F to 158 F] Operating voltage 10 Vdc to 30 Vdc Expected current consumption <100 mA Output PNP NO/NC NPN NO/NC Expected output current 100 mA max. www..com Adjustment set point Teach-In Stainless steel housing M12x1 Sealing* IP65 Connector M12x1 *Attention! Do not expose sensor head to hot water >50 C or water vapour. Accessories Catalog Listing 66195044-001 66195045-001 Description Mating connector straight Mating connector angled Mounting Dimensions (For reference only. mm/[in]) 2 www.honeywell.com/sensing Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Distance Sensors Wiring Pin 1 R Pin 4 +24 V 4 3 Pin 2 www..com Teach-In 1 2 Pin 3 0V Detection Range +15 mm - 15 0 25 mm 200 Enhanced detection of a target 100 mm x 100 mm Possible detection of a large target Honeywell Sensing and Control 3 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. * * WARNING MISUSE OF DOCUMENTATION The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: info.sc@honeywell.com Internet: www.honeywell.com/sensing Phone and Fax: Asia Pacific Europe +65 6355-2828 +65 6445-3033 Fax +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax www..com sole remedy and is in lieu of all other foregoing is buyer's Automation and Control Solutions Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 www.honeywell.com/sensing 004449-1-EN IL50 GLO Printed in USA February 2006 Copyright (c) 2006 Honeywell International Inc. All rights reserved. Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 943 Series (943-K4U2G-001/002/1C0-400E) Ultrasonic Distance Sensors www..com DESCRIPTION The new 943-K4U series industrial sensors are the latest addition to our range of ultrasonic distance sensors. They offer improved scanning ranges and remote Teach-In of the switching or analogue outputs, in addition to new, advanced features, such as Window and Hysteresis modes. The devices are Teach-In compatible and have a plastic housing. FEATURES * * * * Non contact distance sensing for use in non invasive measurement Reduced sensitivity to light intensity/reflectivity/opacity of target for enhanced flexibility and certainty of measurement Detects over much longer distance than other detection methods reducing the need for close proximity to the target Presence absence, tank fill level and diameter measurement provide an extremely robust and flexible measurement method * * Miniature form factor device fits into the smallest mounting positions Two mounting methods provide flexibility of mounting options to suit the application * * * * * * POTENTIAL APPLICATIONS Level measurement in small containers/test tubes Small object detection in narrow environments Presence detection Winding/unwinding control Height/thickness measurement Parts counting Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 943 Series (943-K4U-2G-001/002/1C0-400E) Specifications Parameter Max. sensing distance Min. sensing distance Switching frequency Linearity error Hysteresis Repeatability of measured distance 943-K4U-2G-001-400E 943-K4U-2G-002-400E 250 mm [9.84 in] 25 mm [0.98 in] 25 Hz - 2% 943-K4U-2G-1C0-400E - <0.3% - 0.2 mm [0.008 in] 0.2% Beam angle 8 Temperature range -25 C to 70 C [-13 F to 158 F] Temperature compensation yes Operating voltage 10 Vdc to 30 Vdc 12 Vdc to 30 Vdc www..com Expected current consumption <100 mA Output PNP NO/NC NPN NO/NC 0 V to 10 V Expected output current 100 mA max. - Adjustment set point Teach-In - Adjustment - Teach-In Housing material plastic Sealing* IP67 Connector M8 *Attention! Do not expose sensor head to hot water >50 C or steam vapour. Mounting Dimensions (For reference only. mm/[in]) 2 www.honeywell.com/sensing Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Distance Sensors Wiring 943-K4U-2G-001-400E Pin 1 Pin 2 Pin 4 R Pin 3 0V +24 V Teach-In 1 24 3 Pin 4 Pin 2 Teach-In 0V 943-K4U-2G-002-400E Pin 1 R +24 V 1 24 3 943-K4U-2G-1C0-400E Pin 1 R Pin 4 Pin 2 Pin 3 Teach-In 0V +24 V 1 24 3 Switching output Pin 3 Detection Range www..com +15 mm - 15 0 25 mm 250 Enhanced detection of a target 100 mm x 100 mm Possible detection of a large target Honeywell Sensing and Control 3 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. * * WARNING MISUSE OF DOCUMENTATION The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: info.sc@honeywell.com Internet: www.honeywell.com/sensing Phone and Fax: Asia Pacific Europe +65 6355-2828 +65 6445-3033 Fax +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax www..com sole remedy and is in lieu of all other foregoing is buyer's Automation and Control Solutions Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 www.honeywell.com/sensing 004450-1-EN IL50 GLO Printed in USA February 2006 Copyright (c) 2006 Honeywell International Inc. All rights reserved. Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com www..com 948 Series (948-ISY2D-001/002/003/004180E) Ultrasonic Distance Sensors DESCRIPTION The 948 Series is one of the smallest ultrasonic scan through devices in the world. Its small, rectangular, IP67-rated plastic housing makes it easy to install in limited space applications. The sensor consists of two parts, a transmitter and a receiver. It is especially suited for food and beverage applications, in particular bottle counting. FEATURES * Thru-scan detection regardless of the object material for enhanced detection Non contact distance sensing for use in non invasive measurement Reduced sensitivity to light intensity/reflectivity/opacity of target for enhanced flexibility and certainty of measurement Detects over much longer distance than other detection methods reducing the need for close proximity to the target Presence absence, tank fill level and diameter measurement provides an extremely robust and flexible measurement method * * * POTENTIAL APPLICATIONS Food and beverage machinery and equipment Rapid presence/absence detection: bottle counting Loop control * * * * Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 948 Series (948-ISY-2D-001/002/003/004-180E) Specifications Parameter Sensing distance Response time on/off Beam angle Output Expected output current Switching frequency Temperature range Operating voltage Expected current consumption Housing Sealing Cable connection 948-ISY-2D-001-180E 948-ISY-2D-002-180E 948-ISY-2D-003-180E 1100 mm [3.61 ft] 3 ms 15 NO NPN NC PNP 500 mA 150 Hz -15 C to 60 C [-5 F to140 F] 18 Vdc to 30 Vdc <40 mA plastic IP67 2 m [6.56 ft] 948-ISY-2D-004-180E NO PNP NC NPN Sensor consists of 2 www..com parts: 1 transmitter and 1 receiver. With flat targets best results may be achieved with an angle 30 object-ultrasonic beam. 2 www.honeywell.com/sensing Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Ultrasonic Distance Sensors Mounting Dimensions (For reference only. mm/[in]) Transmitter Brown: Vdc Blue: 0 V Receiver www..com Brown: Vdc Blue: 0 V Black: O/P Honeywell Sensing and Control 3 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. * * WARNING MISUSE OF DOCUMENTATION The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: info.sc@honeywell.com Internet: www.honeywell.com/sensing Phone and Fax: Asia Pacific Europe +65 6355-2828 +65 6445-3033 Fax +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax www..com sole remedy and is in lieu of all other foregoing is buyer's Automation and Control Solutions Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 www.honeywell.com/sensing 004448-1-EN IL50 GLO Printed in USA February 2006 Copyright (c) 2006 Honeywell International Inc. All rights reserved. Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com |
Price & Availability of 945-F4X-2D-00X |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |