![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
www..com Full Color PLCC4 LED OVSARGB3R8 Surface mount device packaged in 8mm tape on 7" diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder Pb-free, RoHS-compliant Dimensions: 3.5x2.8x1.9mm 120 viewing angle x x x x x x Product Photo Here The OVSARGB3R8 provides full color light output from a single package, 3-die design. This surface mount package is an efficient solution in modular applications that require uniform brightness and color-on-demand. Light output is optimized by an interior reflector and the wide viewing angle adds flexibility for applications ranging from hand-held appliances to automotive interiors. Applications x RGB+White Full-color Indoor and Outdoor Displays x Backlighting x Coupling into Lightguides x Automotive Interiors x Entertainment Equipment Part Number Chip Emitted Color Red Green Blue Lens Color Water Clear OVSARGB3R8 Type R G B Material AlInGaP InGaN InGaN Intensity Typ. mcd 300 450 110 RoHS 1,3,4 CATHODE 2 ANODE DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. Data is subject to change without prior notice. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue 1.0 0605 Page 1 Full-Color PLCC4 LED OVSARGB3R8 Absolute Maximum Ratings TA = 25o C unless otherwise noted PARAMETER Storage Temperature Operating Temperature Reverse Voltage Continuous Forward Current 1 RATING R G -40 ~ +100 -40 ~ +100 5 50 200 130 110 25 100 105 110 400 580 280 430 25 100 105 110 450 680 300 480 B UNIT C C V mA mA mW C C/W C/W C/W C/W Peak Forward Current (10% Duty Cycle, PW sec) Power Dissipation Junction Temperature Junction/ambient (1 chip on ) Junction/ambient (3 chips on2) Junction/solder point (1 chip on) Junction/solder point (3 chips on) 2 450 650 300 450 Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL PARAMETER Min Typ Typ Max VALUES R 180 300 2.3 2.6 10 612-625 620 120 24 G 280 450 3.6 4.2 10 520-540 520 120 38 B 71 110 3.6 4.2 10 460-480 465 120 28 UNIT CONDITIONS IV Luminous Intensity VF IR D P Forward Voltage Reverse Current (max) Dominant Wavelength Wavelength at Peak Emission 50% Power Angle Spectrum Radiation Bandwidth 2 1/2 Issue 1.0 Page 2 0605 | Notes: 1. Single color light 2. Rth test condition: Mounted on PC Board FR 4 (pad size 2 ) mcd IF = 20mA V A nm nm deg nm IF = 20mA VR = 5V IF = 20mA IF = 20mA IF = 20mA IF = 20mA OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Full-Color PLCC4 LED OVSARGB3R8 Standard Bins (IF=20mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVSARGB3R8 may be filled with any or all bins contained as below. RED Luminous Intensity (mcd) 450 280 180 612 T S Luminous intensity is at S bin or above. Dominant Wavelength (nm) 625 GREEN Luminous Intensity (mcd) 710 450 280 520 U T Luminous intensity is at T bin or above. Dominant Wavelength (nm) 540 BLUE Luminous Intensity (mcd) 180 112 71 460 R Q Luminous intensity is at Q bin or above. Dominant Wavelength (nm) 480 Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Tolerance of measurement of luminous intensity is 10%. 3. Tolerance of measurement of dominant wavelength is 1nm. 4. Tolerance of measurement of VF is 0.05V. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue 1.0 0605 Page 3 Full-Color PLCC4 LED OVSARGB3R8 Typical Electro-Optical Characteristics Curves Relative Intensity vs. Dominant Wave Length IF(mA) IF(mA) VF(V) Forward Current vs. Forward Voltage VF(V) Percent (%) Percent (%) IF(mA) IF(mA) Relative Luminous Intensity vs. Forward Current Issue 1.0 Page 4 0605 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Full-Color PLCC4 LED OVSARGB3R8 Typical Electro-Optical Characteristics Curves 1 Chip On 3 Chips On IF(mA) IF(mA) TA( C) TA( C) Maximum Forward DC Current vs. Solder Point Temperature 1 Chip On 3 Chips On IF(mA) IF(mA) TA( C) TA( C) Maximum Forward DC Current vs. Ambient Temperature 50% Power Angle: 120 Far Field Pattern OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue 1.0 0605 Page 5 Full-Color PLCC4 LED OVSARGB3R8 CIE Graph The color coordinates of the mixed light can be expected within the area of the color triangle marked a). The achromatic point (x =0.33, y=0.33) is marked "+". Issue 1.0 Page 6 0605 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Full-Color PLCC4 LED OVSARGB3R8 Reel Dimensions (7 Inch) Carrier Tape Dimensions: Loaded Quantity 2000 PCS per Reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue 1.0 0605 Page 7 Full-Color PLCC4 LED OVSARGB3R8 Issue Change Description Approval Date 1.0 Initial Release J. Haynie 6/30/05 Issue 1.0 Page 8 0605 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com |
Price & Availability of OVSARGB3R8
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |