View SS-10_160883.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Subminiature Basic Switch
Economical, Subminiature Basic Switch Offers Long Life (30 x 106 Operations)
Incorporating simple and stable two split springs which ensures a long service life (30,000,000 operations). A variety of models with low operating force to high operating force are available. Solder, quick-connect terminals (#110) and PCB terminals are available. Approval obtained for standards including UL, CSA, and VDE. Conforms to EN61058-1.
SS
RC
221
S+E
Ordering Information
Model Number Legend SS-jjjjj
1 2 3 4 5
1.
Ratings 01: 0.1 A 5: 5 A 10: 10 A Actuator None: Pin plunger GL: Hinge lever GL13: Simulated hinge lever GL2: Hinge roller lever Operating Force (at Pin Plunger) None: 1.47 N {150 gf} -F: 0.49 N {50 gf} -E: 0.25 N {25 gf} Note: These values are for the pin plunger model.
4.
Contact Form None: SPDT -2: SPST-NC -3: SPST-NO Terminals None: Solder Quick-connect terminals (#110) T: D: PCB Note: The PCB terminal has a right-angle terminal option. D1: Upward direction D2: Downward direction These are UL, CSA, and VDE approved.
2.
5.
3.
Note:
When suffix "-T" is placed after the model number, the model withstands high temperatures (-25C to 125C) and is UL and CSA approved.
114
SS List of Models
Rating 0.1 A 0 Actuator Pin p u ge plunger OF max. 0.25 N {25 gf} 0.49 N {50 gf} 1.47 N {150 gf} Hinge lever ge e e 0.08 N {8 gf} 0.16 N {16 gf} 0.49 N {50 gf} S u a ed Simulated hinge lever ge e e 0.08 N {8 gf} 0.16 N {16 gf} 0.49 N {50 gf} Hinge roller lever ge o e e e 0.08 N {8 gf} 0.16 N {16 gf} 0.49 N {50 gf} 5 A (see note 1) oe ) Pin p u ge plunger Hinge lever ge e e Simulated hinge lever 0.49 N {50 gf} 1.47 N {150 gf} 0.16 N {16 gf} 0.49 N {50 gf} 0.16 N {16 gf} 0.49 N {50 gf} Hinge roller lever 0.16 N {16 gf} 0.49 N {50 gf} 10.1 A (see note 1) Pin plunger Hinge lever Simulated hinge lever Hinge roller lever 1.47 N {150 gf} 0.49 N {50 gf} 0.49 N {50 gf} 0.49 N {50 gf} Soldering terminal SS-01-E SS-01-F SS-01 SS-01GL-E SS-01GL-F SS-01GL SS-01GL13-E SS-01GL13-F SS-01GL13 SS-01GL2-E SS-01GL2-F SS-01GL2 SS-5-F SS-5 SS-5GL-F SS-5GL SS-5GL13-F SS-5GL13 SS-5GL2-F SS-5GL2 SS-10 SS-10GL SS-10GL13 SS-10GL2 Quick-connect terminal (#110) SS-01-ET SS-01-FT SS-01T SS-01GL-ET SS-01GL-FT SS-01GLT SS-01GL13-ET SS-01GL13-FT SS-01GL13T SS-01GL2-ET SS-01GL2-FT SS-01GL2T SS-5-FT SS-5T SS-5GL-FT SS-5GLT SS-5GL13-FT SS-5GL13T SS-5GL2-FT SS-5GL2T SS-10T SS-10GLT SS-10GL13T SS-10GL2T
SS
PCB terminal SS-01-ED SS-01-FD SS-01D SS-01GL-ED SS-01GL-FD SS-01GLD SS-01GL13-ED SS-01GL13-FD SS-01GL13D SS-01GL2-ED SS-01GL2-FD SS-01GL2D SS-5-FD SS-5D SS-5GL-FD SS-5GLD SS-5GL13-FD SS-5GL13D SS-5GL2-FD SS-5GL2D SS-10D SS-10GLD SS-10GL13D SS-10GL2D
Note:
1. EN61058-1 (IEC601058-1) approved by TUV Rheinland. 2. SPST models are also available, but not listed in the above table.
115
SS
SS
Specifications
Ratings
Type Rated voltage Non-inductive load Resistive load NC Generalpurpose pp 125 VAC 250 VAC 8 VDC 14 VDC 30 VDC 125 VDC 250 VDC Note: 2. 3. 4. 5. 6. 7. NO 5 (10.1) A (see note 1) ( ) 3 (10.1) A (see note 1) 5 (10.1) A (see note 1) 5 (10.1) A (see note 1) 4A 0.4 A 0.2 A Lamp load NC 1.5 A 1A 2A 2A 2A 0.05 A 0.03 A NO 0.7 A 0.5 A 5A 4A 3A 0.4 A 0.2 A SS-10, SS-5 Inductive load Inductive load NC 3A 2A 4A 4A 3A 0.4 A 0.2 A NO Motor load NC 2.5 A 1.5 A 3A 3A 3A 0.05 A 0.03 A NO 1.3 A 0.8 A SS-01 Non-inductive load Resistive load NC 0.1 A --0.1 A 0.1 A 0.1 A ----NO
1. Data in parentheses apply to the SS-10 models only. The above values are for the steady-state current. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC). Lamp load has an inrush current of 10 times the steady-state current. Motor load has an inrush current of 6 times the steady-state current. If the Switch is used in a DC circuit and is subjected to a surge, connect a surge suppressor across the Switch. The ratings values apply under the following test conditions: Ambient temperature: 202C Ambient humidity: 655% Operating frequency: 30 operations/min
Use the Switch within the following operating range. Voltage (V)
Operating range for micro-load models SS-01
Operating range for general-load models SS-5, SS-10
Inoperable range
Current (mA) Item Minimum applicable load SS-01 1 mA at 5 VDC SS-5 SS-10 160 mA at 5 VDC
116
SS Characteristics
Operating speed Operating frequency Insulation resistance Contact resistance (initial value) 0.1 mm to 1 m/s (pin plunger models) Mechanical: 400 operations/min Electrical: 60 operations/min 100 M min. (at 500 VDC) OF 1.47 N {150 gf}: SS-01 models: 50 m max. SS-5, SS-10 models: 30 m max. OF 0.49 N {50 gf}: SS-01 models: SS-5 models: OF 0.25 N {25 gf}: SS-01 models: Dielectric strength 100 m max. 50 m max. 150 m max.
SS
1,000 VAC (600 VAC for SS-01 models), 50/60 Hz for 1 min between terminals of the same polarities 1,500 VAC, 50/60 Hz for 1 min between current-carrying metal part and ground, and between each terminal and non-current-carrying metal part (see note 1) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Destruction: OF 1.47 N {150 gf}: OF 0.25 N {25gf}/0.49 N {50 gf}: Malfunction: OF 1.47 N {150 gf}: OF 0.25 N {25 gf}/0.49 N {50 gf}: Note: 1,000 m/s2 {approx. 100G} max. 500 m/s2 {approx. 50G} max. 300 m/s2 {approx. 30G} max. 200 m/s2 {approx. 20G} max.
Vibration resistance (see note 2) Shock resistance
Lever-type model: Total travel position (with a contact separation time of 1 ms max.)
Life expectancy
Mechanical: 30,000,000 operations min. (Refer to the following Engineering Data.) 10,000,000 operations min. for SS-10 models Electrical: 200,000 operations min. (Refer to the following Engineering Data.) 50,000 operations min. for SS-10 models IP00 Class 1 175 D (IEC 335-1) Operating: -25C to 85C (at ambient humidity of 60% max.) (with no icing) Operating: 85% max. (for 5C to 35C) Approx. 1.6 g (pin plunger models)
Degree of protection Degree of protection against electrical shock Proof Tracking Index (PTI) Switch category Ambient temperature Ambient humidity Weight Note:
1. The dielectric strength shown in the table indicates a value for models with a Separator. 2. For the pin plunger models, the above values apply for use at both the free position and total travel position. For the lever models, they apply at the total travel position.
Approved Standards
UL1054 (File No. E41515) CSA C22.2 No. 55 (File No. LR21642)
Rated voltage 125 VAC 250 VAC 30 VDC 120 VAC (TV) --10.1 A ----SS-10 5A 3A --2A SS-5 --0.1 A --SS-01 0.1 A
EN61058-1 (IEC601058-1) (TUV Rheinland, File No. J9451450)
Rated voltage 250 VAC SS-10 10 A SS-5 5A 5 (1) A motor 3 A (see note 2) --5 A (see note 2) --SS-01
125 VAC 30 VDC Note:
-----
0.1 A (see note 2) 0.1 A (see note 2)
VDE0630 (File No. 6131UG) SEMKO (File No. 9812216/01), (File No. 8916091)
Rated voltage 250 VAC SS-10 10 A 5A SS-5
SEV (File No. 93. 5. 51936. 01)
Rated voltage 250 VAC 5A SS-5
1. Testing conditions: 50,000 operations, T85 (0C to 85C) 2. These approvals are only limited to OF 1.47 N {150 gf} models.
117
SS Contact Specifications
Item Co ac Contact Specification Material Gap (standard value) Inrush us current t NC NO SS-10 Rivet Silver alloy 0.5 mm Silver SS-5 SS-01 Crossbar Gold alloy 0.25 mm
SS Contact Form (SPDT)
SPDT
20 A max. 15 A max. 10 A max.
1 A max. 1 A max.
COM NO NC
Engineering Data
Mechanical Life Expectancy (Pin Plunger Model)
SS-5, SS-1, SS-01 Models Number of operations (x10 3)
Ambient temperature: 202C Ambient humidity: 655% Without load Operating frequency: 60 operations/min
Electrical Life Expectancy (Pin Plunger Model)
SS-5 Models
5,000 Ambient temperature: 202C Ambient humidity: 655% Operating frequency: 30 operations/min cos = 1
Number of operations (x10 3)
40,000
3,000
30,000
1,000 500 300 100 50 30 10 250 VAC 125 VAC
20,000
10,000
5,000
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0
1
2
3
4
5
6
7
Overtravel (mm)
Switching current (A)
Dimensions
Terminals
Terminal plate thickness is 0.5 mm.
Solder Terminal
Quick-connect Terminal (#110)
PCB Terminal
2.9 3.2 8.8 COM terminal (C) 9.50.1 19.8 NO terminal NC terminal 7.3
6.4
2.9 7.1 10.6
2.9 1.6 8.8 COM terminal (C) 9.50.1 19.8 NO terminal 7.3
3.3 0.5
0.6
7.0
1.6
1.6 Three, 1.6-dia. holes 6.4 COM terminal (C) 8.8 9.50.1 19.8 NO terminal NC terminal 7.3 3.2
2.8 Three, 1.2 dia.
1.2 3.2 t = 0.5
NC terminal
118
SS Dimensions and Operating Characteristics
Note: 1. All units are in millimeters unless otherwise indicated.
SS
2. The following illustration and drawing are for solder terminal models. Refer to page 118 for details on models with quick-connect terminals (#110) or PCB terminals. 3. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
Pin Plunger
SS-01(-E, -F) SS-5(-F) SS-10
6.4
PT 2 OP 2.9 2.35 -0.05 2.5
+0.075
7.5 3.2
9.5 10.2 6.4 2.35 +0.075 dia. holes -0.05 8.8 7.3 5.1 9.50.1 19.8 3.2 6.4 Three, 1.6 dia.
2.50.07 dia. 1.6
Model OF max. RF min. PT max. OT min. MD max. OP
SS-01-E 0.25 N {25 gf} 0.02 N {2 gf} 0.5 mm 0.5 mm 0.1 mm 8.40.5 mm
SS-01-F SS-5-F 0.49 N {50 gf} 0.04 N {4 gf} 0.5 mm 0.5 mm 0.1 mm
SS-01 SS-5 1.47 N {150 gf} 0.25 N {25 gf} 0.5 mm 0.5 mm 0.1 mm
SS-10 1.47 N {150 gf} 0.25 N {25 gf} 0.6 mm 0.4 mm 0.12 mm
Hinge Lever
SS-01GL(-E, -F) SS-5GL(-F) SS-10GL
2.9 t = 0.3 (see note 1) 2.35 -0.05 2.5 2.50.07 dia. 1.6
+0.075
14.5 (see note 2)
4
OP 9.5 10.2
FP
6.4
+0.075 2.35 -0.05
dia. holes
8.8 7.3 5.1 9.50.1 19.8
3.2 6.4
Three, 1.6 dia.
Note:
1. Stainless-steel lever 2. Besides the SS-jGL models with a hinge lever length of 14.5, the SS-jGL11 models with a hinge lever length of 18.5, the SS-jGL111 models with a hinge lever length of 22.6, and the SS-jGL1111 models with a hinge lever length of 37.8 are available. Contact your OMRON representative for these models
Model OF max. RF min. OT min. MD max. FP max. OP
SS-01GL-E 0.08 N {8 gf} 0.01 N {1 gf} 1.2 mm 0.8 mm 13.6 mm 8.80.8 mm
SS-01GL-F SS-5GL-F 0.16 N {16 gf} 0.02 N {2 gf} 1.2 mm 0.8 mm
SS-01GL SS-5GL 0.49 N {50 gf} 0.06 N {6 gf} 1.2 mm 0.8 mm
SS-10GL 0.49 N {50 gf} 0.06 N {6 gf} 1.0 mm 1.0 mm
119
SS
Simulated Hinge Lever
SS-01GL13(-E, -F) SS-5GL13(-F) SS-10GL13
2.9 2.5 t = 0.3 (see note) 15.8 1.3R 4
SS
2.35 -0.05
+0.075
OP 9.5 10.2
FP
6.4 2.35 +0.075 dia. holes -0.05 8.8 5.1 9.50.1 19.8 7.3 Three, 1.6 dia. Note: Stainless-steel spring lever
2.50.07 dia. 1.6
3.2 6.4
Model OF max. RF min. OT min. MD max. FP max. OP
SS-01GL13-E 0.08 N {8 gf} 0.01 N {1 gf} 1.2 mm 0.8 mm 15.5 mm 10.70.8 mm
SS-01GL13-F SS-5GL13-F 0.16 N {16 gf} 0.02 N {2 gf} 1.2 mm 0.8 mm
SS-01GL13 SS-5GL13 0.49 N {50 gf} 0.06 N {6 gf} 1.2 mm 0.8 mm
SS-10GL13 0.49 N {50 gf} 0.06 N {6 gf} 1.0 mm 1.0 mm
Hinge Roller Lever
SS-01GL2(-E, -F) SS-5GL2(-F) SS-10GL2
t = 0.3 (see note 1)
14.5
4.8 dia. x 3.2 (see note 2)
OP 2.35 -0.05 dia. 2.9 2.5 2.50.07 dia. 1.6 8.8 5.1 9.50.1 19.8 7.3
+0.075
FP
9.5 10.2 6.4 2.35 -0.05 dia. holes
+0.075
3.2 6.4
Three, 1.6 dia. Note: 1. Stainless-steel spring lever 2. Polyacetal resin roller
Model OF max. RF min. OT min. MD max. FP max. OP
SS-01GL2-E 0.08 N {8 gf} 0.01 N {1 gf} 1.2 mm 0.8 mm 19.3 mm 14.50.8 mm
SS-01GL2-F SS-5GL2-F 0.16 N {16 gf} 0.02 N {2 gf} 1.2 mm 0.8 mm
SS-01GL2 SS-5GL2 0.49 N {50 gf} 0.06 N {6 gf} 1.2 mm 0.8 mm
SS-10GL2 0.49 N {50 gf} 0.06 N {6 gf} 1.0 mm 1.0 mm
Separators (Insulation Sheet)
Applicable Switch SS, D2S, D2SW S, S Thickness (mm) 0.18 0.4 Separator for SSj Model (see note) Separator for SS0.18 Separator for SS0.4
Separator
120
SS
SS
Precautions
Mounting
Use two M2.3 mounting screws with spring washers to mount the Switch. Tighten the screws to a torque of 0.23 to 0.26 N S m {2.3 to 2.6 kgf S cm}. Mounting Holes
Two, 2.4-dia. mounting holes or M2.3 screw holes
Terminal Connection
When soldering the lead wire to the terminal, first insert the lead wire conductor through the terminal hole and then conduct soldering. To solder the lead to the terminal, apply a soldering iron rated at 60 W max. (temperature of soldering iron: 250C to 300C) within 5 seconds. During soldering and one minute after soldering, do not apply any external force to the soldered terminal. Feed solder away from the switch case so that solder or flux will not flow into the case side. If the PCB terminal models are soldered in the solder bath, flux will permeate inside the Switch and cause contact failure. Therefore, manually solder the PCB terminal. Specifications Approved by TUV Rheinland According to EN61058-1 Model
9.50.1 3.25
9.5 0.1
PCB Mounting Dimensions (Reference)
5.25
Conductor size 0.5 to 0.75 mm2 0.75 mm2
SS-5 SS-10
Solder Terminal Approved Conditions
Three, 1.35 to 1.5 dia.
Soldering iron can be used. Soldering hook hole available. Soldering terminal types 1 and 2 are met.
(1.6)
Spacing
8.8 +0.15 -0.05 16.10.1
Correct Use
Refer to pages 22 to 29 for common precautions.
The minimum thickness of insulation according to IEC61058-1 is 1.1 mm, and the minimum clearance between live terminals and mounting plate is 1.6 mm. If the proper insulation for the terminator cannot be obtained, add insulation such as a Separator or insulation guard on the switch.
Connector
Refer to Terminal Connectors on page 214.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. B032-E1-11A
121

▲Up To Search▲

Price & Availability of SS-10

	To Download SS-10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .