|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
www..com EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 1206 Package Chip LEDs Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. (1.1mm Height) 15-21SYGC/S530-E1/TR8 Descriptions The 15-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. .com DataShee Device Selection Guide PART No. Chip Material Emitted Color Lens Color 15-21SYGC/S530-E1/TR8 AlGaInP Super Yellow Green Water Clear Everlight Electronics Co., Ltd. .com Device No: DSE-151-071 http://www.everlight.com Prepared date: 8-2-2004 Rev 1.1 Page: 1 of 9 Prepared by: Malone Yu DataSheet 4 U .com www..com EVERLIGHT ELECTRONICS CO.,LTD. 15-21SYGC/S530-E1/TR8 Package Outline Dimensions t4U.com .com DataShee Note: The tolerance unless mentioned is 0.1mm ,unit is mm Everlight Electronics Co., Ltd. .com Device No: DSE-151-071 http://www.everlight.com Prepared date: 8-2-2004 Rev 1.1 Page: 2 of 9 Prepared by: Malone Yu DataSheet 4 U .com www..com EVERLIGHT ELECTRONICS CO.,LTD. 15-21SYGC/S530-E1/TR8 Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Electrostatic Discharge Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Symbol VR IF Topr Tstg Tsol ESD Pd IF P Rating 5 25 -40 ~ +85 -40~ +90 260 (for 5 second) 2000 60 60 Unit V mA V mW mA Electro-Optical Characteristics (Ta=25) Parameter t4U.com Symbol Iv 21/2 p d VF IR Min. Typ. Max. Unit mcd deg nm nm nm V A Condition Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength .com 10 15 --------------------2.4 10 DataShee ------------------------- 130 575 573 20 2.0 ----- IF=20mA Spectrum Radiation Bandwidth Forward Voltage Reverse Current VR=5V Everlight Electronics Co., Ltd. .com Device No: DSE-151-071 http://www.everlight.com Prepared date: 8-2-2004 Rev 1.1 Page: 3 of 9 Prepared by: Malone Yu DataSheet 4 U .com www..com EVERLIGHT ELECTRONICS CO.,LTD. 15-21SYGC/S530-E1/TR8 Typical Electro-Optical Characteristics t4U.com .com DataShee Everlight Electronics Co., Ltd. .com Device No: DSE-151-071 http://www.everlight.com Prepared date: 8-2-2004 Rev 1.1 Page: 4 of 9 Prepared by: Malone Yu DataSheet 4 U .com www..com EVERLIGHT ELECTRONICS CO.,LTD. 15-21SYGC/S530-E1/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions t4U.com .com DataShee Note: The tolerance unless mentioned is 0.1mm ,unit is mm Everlight Electronics Co., Ltd. .com Device No: DSE-151-071 http://www.everlight.com Prepared date: 8-2-2004 Rev 1.1 Page: 5 of 9 Prepared by: Malone Yu DataSheet 4 U .com www..com EVERLIGHT ELECTRONICS CO.,LTD. 15-21SYGC/S530-E1/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel t4U.com .com Note: The tolerance unless mentioned is 0.1mm ,Unit is mm DataShee Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. .com Device No: DSE-151-071 http://www.everlight.com Prepared date: 8-2-2004 Rev 1.1 Page: 6 of 9 Prepared by: Malone Yu DataSheet4 U .com www..com EVERLIGHT ELECTRONICS CO.,LTD. 15-21SYGC/S530-E1/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 5 sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min .com Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 Pcs. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 0/1 t4U.com 4 5 6 7 Temp. : 100 Temp. : -40 IF = 20 mA 85/85% RH 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 DataShee Everlight Electronics Co., Ltd. .com Device No: DSE-151-071 http://www.everlight.com Prepared date: 8-2-2004 Rev 1.1 Page: 7 of 9 Prepared by: Malone Yu DataSheet 4 U .com www..com EVERLIGHT ELECTRONICS CO.,LTD. 15-21SYGC/S530-E1/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. t4U.com 3. Soldering Condition 3.1 Lead solder temperature profile .com DataShee 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. .com Device No: DSE-151-071 http://www.everlight.com Prepared date: 8-2-2004 Rev 1.1 Page: 8 of 9 Prepared by: Malone Yu DataSheet 4 U .com www..com EVERLIGHT ELECTRONICS CO.,LTD. 15-21SYGC/S530-E1/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. t4U.com .com EVERLIGHT ELECTRONICS CO., LTD. Office: No 355,Zhong Shan North Rd ,WuJiang, Economy Development Zone(YunXi Area), SongLing Town,WuJiang City,JiangSu PRC, China. Tel: 0512-63409123-1603 Fax: 0512-63409123-1510 http://www.everlight.com Everlight Electronics Co., Ltd. .com Device No: DSE-151-071 http://www.everlight.com Prepared date: 8-2-2004 Rev 1.1 Page: 9 of 9 Prepared by: Malone Yu DataSheet 4 U .com |
Price & Availability of 15-21SYGCS530-E1TR8 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |