View HD74LV1GW07A_109688.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74LV1GW07A
Dual Buffer Open Drain
REJ03D0076-0100Z (Previous ADE-205-706 (Z)) Rev.1.00 Sep.11.2003
Description
The HD74LV1GW07A has dual buffer open drain in a 6 pin package. Low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life.
Features
* The basic gate function is lined up as Renesas uni logic series. * Supplied on emboss taping for high-speed automatic mounting. * Supply voltage range : 1.65 to 5.5 V Operating temperature range : -40 to +85C * All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V, Output: Z) * Output current 6 mA (@VCC = 3.0 V to 3.6 V), 12 mA (@VCC = 4.5 V to 5.5 V) * All the logical input has hysteresis voltage for the slow transition. * Ordering Information
Part Name HD74LV1GW07ACME Package Type CMPAK-6 pin Package Code CMPAK-6V(O) Package Abbreviation CM Taping Abbreviation (Quantity) E (3,000 pcs / Reel)
Rev.1.00, Sep.11.2003, page 1 of 7
HD74LV1GW07A
Outline and Article Indication
* HD74LV1GW07A
Index band Marking
WE
CMPAK-6
= Control code
Function Table
Input A H L H : High level L : Low level Z : High impedance Output Y Z L
Pin Arrangement
1A
1
6
1Y
GND
2
5
VCC
2A
3
4
2Y
(Top view)
Rev.1.00, Sep.11.2003, page 2 of 7
HD74LV1GW07A
Absolute Maximum Ratings
Item Supply voltage range Input voltage range *1 Output voltage range Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25C (in still air) Storage temperature Notes:
*1, 2
Symbol VCC VI VO IIK IOK IO ICC or IGND PT Tstg
Ratings -0.5 to 7.0 -0.5 to 7.0 -0.5 to VCC + 0.5 -0.5 to 7.0 -20 50 25 50 200 -65 to 150
Unit V V V mA mA mA mA mW C
Test Conditions
Output : L VCC : OFF or Output : Z VI < 0 VO < 0 or VO > VCC VO = 0 to VCC
The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150C.
Recommended Operating Conditions
Item Supply voltage range Input voltage range Output voltage range Output current Symbol VCC VI VO IOL Min 1.65 0 0 -- -- -- -- Input transition rise or fall rate t / v 0 0 0 0 Operating free-air temperature Ta -40 Note: Unused or floating inputs must be held high or low. Max 5.5 5.5 VCC 1 2 6 12 300 200 100 20 85 C ns / V Unit V V V mA VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V Conditions
Rev.1.00, Sep.11.2003, page 3 of 7
HD74LV1GW07A
Electrical Characteristic
* Ta = -40 to 85C
Item Input voltage Symbol VCC (V) * VIH Min VCCx0.7 VCCx0.7 VCCx0.7 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Typ Max -- -- -- -- VCCx0.25 VCCx0.3 VCCx0.3 VCCx0.3 -- -- -- -- 0.1 0.3 0.4 0.44 0.55 1 5 10 5 -- A A A A pF V IOL = 50 A IOL = 1 mA IOL = 2 mA IOL = 6 mA IOL = 12 mA VIN = 5.5 V or GND VO = 5.5 V or GND VIN = VCC or GND, IO = 0 VIN or VO = 0 to 5.5 V VIN = VCC or GND V VT+ - VT- Unit V Test condition
1.65 to 1.95 VCCx0.75 -- 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 -- -- -- -- -- -- -- 0.25 0.30 0.35 0.45 -- -- -- -- -- -- -- -- -- 3.0
VIL
1.65 to 1.95 -- 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5
Hysteresis voltage VH
1.8 2.5 3.3 5.0
Output voltage
VOL
Min to Max 1.65 2.3 3.0 4.5
Input current Off state output current Quiescent supply current Output leakage current
IIN IOZ ICC IOFF
0 to 5.5 Min to Max 5.5 0 3.3
Input capacitance CIN
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.1.00, Sep.11.2003, page 4 of 7
HD74LV1GW07A
Switching Characteristics
* VCC = 1.8 0.15 V
Item Symbol Ta = 25C Min Propagation delay time tZL tLZ -- -- Typ 12.6 19.7 Max 22.0 33.0
Ta = -40 to 85C Unit Test
Min 1.0 1.0
Max 24.0 36.0 ns
FROM Conditions (Input) CL = 15 pF CL = 50 pF A
TO (Output) Y
* VCC = 2.5 0.2 V
Item Symbol Ta = 25C Min Propagation delay time tZL tLZ -- -- Typ 7.0 10.5 Max 11.7 15.5
Ta = -40 to 85C Unit Test
Min 1.0 1.0
Max 14.0 18.0 ns
FROM Conditions (Input) CL = 15 pF CL = 50 pF A
TO (Output) Y
* VCC = 3.3 0.3 V
Item Symbol Ta = 25C Min Propagation delay time tZL tLZ -- -- Typ 5.0 7.5 Max 7.1 10.6
Ta = -40 to 85C Unit Test
Min 1.0 1.0
Max 8.5 12.0 ns
FROM Conditions (Input) CL = 15 pF CL = 50 pF A
TO (Output) Y
* VCC = 5.0 0.5 V
Item Symbol Ta = 25C Min Propagation delay time tZL tLZ -- -- Typ 3.8 5.3 Max 5.5 7.5
Ta = -40 to 85C Unit Test
Min 1.0 1.0
Max 6.5 8.5 ns
FROM Conditions (Input) CL = 15 pF CL = 50 pF A
TO (Output) Y
Operating Characteristics
* CL = 50 pF
Item Symbol VCC (V) Ta = 25C Min Power dissipation capacitance CPD 3.3 5.0 -- -- Typ 8.5 10.0 Max -- -- pF f = 10 MHz Unit Test Conditions
Rev.1.00, Sep.11.2003, page 5 of 7
HD74LV1GW07A
Test Circuit
VCC VCC
RL = 1 k
Pulse generator
Input
Output
50
CL
Note: CL includes probe and jig capacitance.
tf
tr
90% Input 50% 10% t ZL 10%
90% 50%
VCC
GND t LZ
VOH 50% Output VOL +0.3 V VOL
Notes: 1. Input waveform : PRR 1 MHz, Zo = 50 , tr 3 ns, tf 3 ns. 2. The output are measured one at a time with one transition per measurement.
Rev.1.00, Sep.11.2003, page 6 of 7
HD74LV1GW07A
Package Dimensions
Unit: mm
(1.3)
(0.65) (0.65)
0.15 0.05
1.3 0.05*
6 - 0.2 - 0.05
+ 0.1
2.0 0.1*
0.88 - 0.03
+ 0.02
(0.1)
(2.1)
0.025 - 0.1
* Sn-Bi plating. ** The value does not include Resin Bar. (One side: 0.15 mm (max))
Package Code JEDEC JEITA Mass (reference value)
CMPAK-6V(O) -- Conforms 0.006 g
Rev.1.00, Sep.11.2003, page 7 of 7

▲Up To Search▲

Price & Availability of HD74LV1GW07A

	To Download HD74LV1GW07A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .