View HE2AN_73040.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VDE
TV-15, 30 AMP (1 Form A) Power Relay
HE RELAYS
50 1.969
33 1.299
FEATURES
* High contact capacity with superior inrush current characteristics;
Rating TV rating 1 Form A 30 A 277 V AC TV-15 2 Form A 25 A 277 V AC TV-10
35.8 1.409
mm inch
* Excellent high heat-resistance; * High dielectric strength: 10,000 V surge Conforming to VDE0806 (Insulation gap: 8 mm .315 inch) VDE, TUV also approved
SPECIFICATIONS
Contacts
Type Arrangement Contact material Initial contact resistance, max. (By voltage drop 6 V DC 1A) Nominal switching capacity Rating (resistive) Max. switching power Max. switching voltage Max. switching current Mechanical (at 180 cpm) Electrical (at 20 cpm) DC coil type AC coil type 1a 2a 1a 2a Silver alloy 100 m 30 A 277 V AC 8,310 VA 25 A 277 V AC 6,925 VA 30 A 277 V AC 8,310 VA 25 A 277 V AC 6,925 VA
Characteristics
Maximum operating speed Initial insulation resistance*1 Between open contacts Initial Between contacts and breakdown coil voltage*2 Between contact sets (2a) Surge voltage between coil and contact*3 Operate time*4 (at nominal voltage) Release time*4 (at nominal voltage) Temperature rise, max. (resistive load)(at 55C) Functional*5 Shock resistance Destructive*6 Functional*7 Vibration resistance Destructive Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) Unit weight Ambient temp. Humidity Air pressure DC coil type AC coil type 20 cpm Min. 1,000 M at 500 V DC 2,000 Vrms for 1 min. 5,000 Vrms for 1 min. 4,000 Vrms for 1 min. Min. 10,000 V Approx. 20 ms Approx. 5 ms Approx. 20 ms 60C
2
277 V AC, 30 V DC 30 A 107 25 A 30 A 25 A
Expected life (min. operations)
5x106
65C
105 (1a: 30 A 277 V AC, 2a: 25 A 277 V AC) 2x105 (1a: 30 A 250 V AC, 2a: 20 A 250 V AC)
Coil (at 20C 68F)
www..com Nominal operating power Remarks
* Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "initial breakdown voltage" section *2 Detection current: 10 mA *3 Wave is standard shock voltage of 1.2x50s according to JEC-212-1981 *4 Excluding contact bounce time *5 Half-wave pulse of sine wave: 11ms; detection time: 10s *6 Half-wave pulse of sine wave: 6ms *7 Detection time: 10s *8 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24).
DC coil type 1.92 W
AC coil type See Coil data (next page)
98 m/s {10 G} 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 1 mm 10 to 55 Hz at double amplitude of 1.5 mm -50C to +55C -58F to +131F 5 to 85% R.H. 86 to 106 kPa Approx. 90 g 3.17 oz (Plug-in type)
TYPICAL APPLICATIONS
1. Home appliances * Air conditioners * Microwave ovens * TV sets * Heaters * Stereo 2. Office equipment * Copiers * Vending machines
ORDERING INFORMATION
HE Contact arrangement 1a: 1 Form A 2a: 2 Form A 1a N S DC12 Terminals Nil: Plug-in terminal type S: Screw terminal type SW: Screw terminal type (wide pitch) Q: NEMA terminal type P: PC board terminal type* V Coil voltage DC: 6, 12, 24, 48, 110 V AC: 12, 24, 48, 120, 240 V
Pick-up voltage N: 70% of nominal voltage
Standard packing: Carton: 20 pcs.; Case: 100 pcs. * PC board terminal are available only for 1 Form A type of DC coil voltage. UL/CSA, TUV approved type is standard.
110
HE
TYPES
Terminal shape Contact arrangement 1 Form A 2 Form A HE1aN-DC6V HE2AN-DC6V HE1aN-DC12V HE2AN-DC12V HE1aN-DC24V HE2AN-DC24V HE1aN-DC48V HE2AN-DC48V HE1aN-DC110V HE2AN-DC110V HE1aN-S-DC6V HE2AN-S-DC6V HE1aN-S-DC12V HE2AN-S-DC12V HE1aN-S-DC24V HE2AN-S-DC24V HE1aN-S-DC48V HE2AN-S-DC48V HE1aN-S-DC110V HE2AN-S-DC110V HE1aN-SW-DC6V HE2AN-SW-DC6V HE1aN-SW-DC12V HE2AN-SW-DC12V HE1aN-SW-DC24V HE2AN-SW-DC24V HE1aN-SW-DC48V HE2AN-SW-DC48V HE1aN-SW-DC110V HE2AN-SW-DC110V HE1aN-Q-DC6V HE2AN-Q-DC6V HE1aN-Q-DC12V HE2AN-Q-DC12V HE1aN-Q-DC24V HE2AN-Q-DC24V HE1aN-Q-DC48V HE2AN-Q-DC48V HE1aN-Q-DC110V HE2AN-Q-DC110V HE1aN-P-DC6V -- HE1aN-P-DC12V -- HE1aN-P-DC24V -- HE1aN-P-DC48V -- HE1aN-P-DC110V -- Terminal shape Contact arrangement 1 Form A 2 Form A HE1aN-AC12V HE2AN-AC12V HE1aN-AC24V HE2AN-AC24V HE1aN-AC48V HE2AN-AC48V HE1aN-AC120V HE2AN-AC120V HE1aN-AC240V HE2AN-AC240V HE1aN-S-AC12V HE2AN-S-AC12V HE1aN-S-AC24V HE2AN-S-AC24V HE1aN-S-AC48V HE2AN-S-AC48V HE1aN-S-AC120V HE2AN-S-AC120V HE1aN-S-AC240V HE2AN-S-AC240V HE1aN-SW-AC12V HE2AN-SW-AC12V HE1aN-SW-AC24V HE2AN-SW-AC24V HE1aN-SW-AC48V HE2AN-SW-AC48V HE1aN-SW-AC120V HE2AN-SW-AC120V HE1aN-SW-AC240V HE2AN-SW-AC240V HE1aN-Q-AC12V HE2AN-Q-AC12V HE1aN-Q-AC24V HE2AN-Q-AC24V HE1aN-Q-AC48V HE2AN-Q-AC48V HE1aN-Q-AC120V HE2AN-Q-AC120V HE1aN-Q-AC240V HE2AN-Q-AC240V
Plug-in terminal
Plug-in terminal
Screw terminal
Screw terminal AC type Screw terminal (wide pitch)
DC Screw terminal type (wide pitch)
NEMA terminal
NEMA terminal
PC board terminal
COIL DATA at 20C 68F
Nominal voltage 6 V DC 12 V DC DC coil type www..com 24 V DC 48 V DC 110 V DC Pick-up voltage, V DC (max.) 4.2 8.4 16.8 33.6 77.0 Drop-out voltage, V DC (min.) 0.6 1.2 2.4 4.8 11.0 Drop-out voltage, V AC (min.) 1.8 3.6 7.2 18.0 36.0 Nominal coil current, mA (10%) 320.9 160 80 40 17.5 Nominal coil current, mA (10%) 138* 74* 39* 22.1* 10.8* Coil resistance, (10%) 18.8 75 300 1200 6300 Nominal operating power, W 1.92 1.92 1.92 1.92 1.92 Nominal operating power, VA 1.7 1.8 1.9 2.7 2.6 Max. allowable voltage (at 50C 122F), V DC 6.6 13.2 26.4 52.8 121.0 Max. allowable voltage (at 50C 122F), V AC 13.2 26.4 52.8 132.0 264.0
Nominal voltage 12 V AC 24 V AC 48 V AC 120 V AC 240 V AC
Pick-up voltage, V AC (max.) 8.4 16.8 33.6 70.0 140.0
Coil resistance, (10%) 75 300 1200 5200 20800
AC coil type
*Value at 60 Hz
111
HE
DIMENSIONS
1. Plug-in terminal type
1a
2-4.5 dia. 2-.177 dia. 1 36.4 1.433 4 33 1.299 6 40 1.575 50 1.969 6.35 .250 FASTON No. 250 10.4 .409 R4 5 6 40 1.575 50 1.969 FASTON No. 250 10.4 .409 R4 5 2-4.5 dia. 2-.177 dia. 1
mm inch 2a
36.4 1.433 14.4 .567 2 3
Schematic 1a
1 4 33 1.299 6 5 6 5 4 1
2a
2 3 4
8.4 10.25 .331 .404 0.8 .031
Panel cutout
2-4.50.1 dia. 2-.177.004 dia. 400.1 1.575.004
3.5 .138
35 1.378
35 1.378
0.8 .031
0.8 .031
General tolerance: 0.3 .012
2. NEMA terminal type
1a
47.6 1.874 36.4 1.433 4.5 .177 1 4 33 1.299 6 40 1.575 50 1.969 60 2.362 6.35 .250 FASTON No. 250 10.4 .409 R4 5 6 40 1.575 50 1.969 60 2.362 FASTON No. 250 10.4 .409 2-4.50.1 dia. 2-.177.004 R4 5 4.5 .177 1
2a
47.6 1.874 36.4 1.433 14.4 .567 2 3 4 33 1.299 6
Schematic 1a
1 4 1
2a
2 3 4
5
6
5
8.4 10.25 .331 .404 0.8 .031
Panel cutout
47.60.1 1.874.004
3.5 www..com .138
35 1.378
35 1.378
0.8 .031
0.8 .031
General tolerance: 0.3 .012
3. Screw terminal type
1a
51.0 2.008 40.0 1.575 14.4 .567 11.3 .445 R4 10.25 .404 33.5 1.319 50.0 1.969 7.5 .295 17.5 .689 16.5 .650 M3.5 33.5 1.319 50.0 1.969 7.5 .295
2a
51.0 2.008 40.0 1.575 36.4 1.433 14.4 .567 11.3 .445 R4 10.25 .404 17.5 .689 16.5 .650
Schematic 1a
1 4 1
2a
2 3 4
M4.5
M4.0
2-4.5 dia. 2-.177
2-4.5 dia. 2-.177
6
5
6
5
M3.5
Panel cutout
2-4.50.1 dia. 2-.177.004 dia. 400.1 1.575.004
44.5 1.752 3.5 .138 0.8 .031
44.5 1.752
0.8 .031
General tolerance: 0.3 .012
112
HE
4. Screw terminal type (wide pitch)
1a
51.0 2.008 47.6 1.874 40.0 1.575 14.4 .567 17.5 11.3 .689 .445 R4 M3.5 33.5 1.319 50.0 1.969 60 2.362 16.5 10.25 .650 .404 M3.5
mm inch 2a
51.0 2.008 47.6 1.874 40.0 1.575 36.4 1.433 14.4 .567 11.3 17.5 .445 .689 R4 33.5 1.319 50.0 1.969 60 2.362 16.5 10.25 .650 .404
Schematic 1a
1 4 1
2a
2 3 4
M4.5 4.5 .177
M4.0 4.5 .177
6
5
6
5
Panel cutout
2-4.50.1 dia. 2-.177.004 7.5 .295 47.60.1 1.874.004
7.5 .295
44.5 1.752 3.5 .138 0.8 .031
44.5 1.752
0.8 .031
General tolerance: 0.3 .012
5. PC board terminal type
38.0 1.496 33 1.299
Schematic (Bottom view)
PC board pattern (Copper-side view)
6-2 dia. 6-.079 dia. 32 1.259
1 36.3 1.429 0.5 .020 4 .157 4.7 .185
4
18.6 .732 6 5 8.4 .331 24 .945 4.7 .185
REFERENCE DATA
1 Form A Type
1. Maximum switching power
100 50 30 www..com 20 Contact current, A 10 5 DC resistive AC resistive
2. Life curve
1,000 No. of operations, x104 500
3. Contact temperature rise (DC type)
Measured portion: Inside the coil Contact current: 30 A
70 Temperature rise, C 60 20C 50 40C 40 30 20 10 60C
100 50 250 V AC resistive 30 V DC resistive
1 0.5
10 5
30
100
500 1,000
0
5
10
15
20
25
30
35
0
100
110
120
Contact voltage, V
Contact current, A
Coil applied voltage, %V
4. Ambient temperature characteristics
Sample: HE1aN-AC120V, 6 pcs.
30 Rate of change, % 20 10 Drop-out voltage 20 40 -10 -20 -30 60 80 Ambient temperature, C Pick-up voltage x x
-50
-20
0
113
HE
2 Form A Type
1. Maximum switching power
100 Contact current, A 50 30 20 10 5 DC resistive AC resistive
2. Life curve
1,000 No. of operations, x104 500
3. Contact temperature rise (DC type)
Measured portion: Inside the coil Contact current: 30 A
70 60 Temperature rise, C 20C 50 40C 60C 40 30 20
100 50 250 V AC resistive 30 V DC resistive
1 0.5
10 5
10 30 100 500 1,000 Contact voltage, V 0 5 10 15 20 25 30 Contact current, A 35 0 100 110 120
Coil applied voltage, %V
4. Ambient temperature characteristics
Sample: HE2AN-AC120V, 6 pcs.
x x
Rate of change, %
Pick-up 20 voltage 10
Drop-out voltage -50 -20 0 20 40 -10 -20 -30 60 80 Ambient temperature, C
MOUNTING METHOD
1. Plug-in terminal type
M 4 screw Washer Faston No.250
2. Screw terminal type
M 4 screw Washer
3. Allowable installation wiring size for screw terminal types and terminal blocks
1a type 2a type 2.6 mm or 5.5 mm2 2.0 mm or 3.5 mm2
www..com
Due to the UP terminals, it is possible to either directly connect the wires or use crimped terminal
NOTES
1. The dust cover should not be removed since doing so may alter the characteristics. 2. Avoid use under severe environmental conditions, such as high humidity, organic gas or in dust, oily locations and locations subjected to extremely frequent shock or vibrations. 3. When mounting, use spring washers. Optimum fastening torque ranges from 5 kg to 7 kg*cm 4.5 to 6 pounds*inch. 4. Firmly insert the receptacles so that there is no slack or looseness. To remove a receptacle, 2 to 4 kg of pulling strength is required. Do not remove more than one receptacle at one time.Always remove one receptacle at a time and pull it straight outwards. 5. Install the relay so that it lies in direction A (up-down direction). (Pick-up voltage and drop-out voltage values are those when installed in direction A.) 6. When using the AC type, the operate time due to the in-rush phase is 20 ms or more. Therefore, it is necessary for you to verify the characteristics for your actual circuit. Moreover, the release time for the NC side of the 2a1b type requires the same verification. 7. When using the push-on blocks for the screw terminal type, use crimped terminals and tighten the screw-down terminals to the torque's listed below.
M4.5 screw M4 screw M3.5 screw 147 N-cm to 166.6 N-cm (15 to 17 kg*cm) 117.6 N-cm to 137 N-cm (12 to 14 kg*cm) 78.4 N-m to 98 N-cm (8 to 10 kg*cm)
8. All AC240V types are rated for double coil voltage, both AC 220V AC 240V.
For Cautions for Use, see Relay Technical Information (Page 11 to 39).
114
HE
HE RELAY ACCESSORIES
Terminal socket instantly attachable to DIN rail
TYPES
Part No. JH1-SF JH2-SF Applicable relays HE1a/JH1a HE2a/JH2a
SPECIFICATIONS
Part No. Maximum continuous current* Breakdown voltage Insulation resistance Heat resistance JH1, JH2 20 A 250 V AC (1a: 30 A 250 V AC) 2,000 Vrms between terminals More than 1,000 M between poles 150C 3C for 1 hour
* Don't insert or remove relays while in the energized condition.
DIMENSIONS
1 Form A, 2 Form A
6 9 .354 8 22 60 .866 2.362 9 .354 7 5 10.25 .404 8.4 .331 3 4 16 .630 23 .906 1 2 11 .433 14.4 .567 11 .433 40 1.575 9.2 .362
mm inch Relay mounting diagram Panel cutout
61 2.402
2-DIA. 4.2 2-DIA. .165 (2-M4 Screw hole) (2-M.157 Screw hole)
4 .157
34 1.339 70 2.756
MOUNTING METHOD
1. Relay mounting 2. Installing to a DIN rain
Push Flat-head screw driver
3. Removing from a DIN rain
www..com
NOTE
1. Be careful not to drop the relay. It is made of heat-hardened resin and may break. 2. Be sure to tighten the screw- down terminals firmly. Loose terminals may lead to the generation of heat.
12/27/2002
All Rights Reserved, (c) Copyright Matsushita Electric Works, 115 Ltd. Go To Online Catalog

▲Up To Search▲

Price & Availability of HE2AN

	To Download HE2AN Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .