|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
( DataSheet : www..com ) Non-polarized 1 Form C Relay HY-RELAYS 12 .472 7.4 .291 FEATURES * High sensitivity: 150 mW/200 mW * A wide range of ambient temperature: -40C to +70C -40F to +158F * Sealed construction * Rating: 1 A 30 V DC 10.1 .398 mm inch SPECIFICATIONS Contact Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Max. carrying current Mechanical (at 180 cpm) Electrical (at 20 cpm) 1 A 30 V DC 1 Form C 100 m Gold-clad silver 1 A 30 V DC 30 W 60 V DC 1A 2A 107 105 Characteristics (at 25C 77F, 50% Relative humidity) Max. operating speed Between contacts Initial insulation Between contact and resistance*1 coil Between open contacts Between contacts and coil Operate time*3 (at nominal voltage) Release time (without diode)*3 (at nominal voltage) Temperature rise at nominal voltage Contact carrying current 1 A at 20C Functional*4 Shock resistance Destructive*5 Initial breakdown voltage*2 Functional*6 Vibration resistance Destructive Conditions for opera- Ambient tion, transport and temp. storage*7 (Not freezing and condensing Humidity at low temperature) Unit weight 20 cpm (at nominal voltage) Min. 100 M at 500 V DC Min. 100 M at 500 V DC 500 Vrms 1,000 Vrms Max. 5 ms (approx. 2 ms) Max. 4 ms (approx. 1 ms) Max. 50C Min. 98 m/s2 (10 G) Min. 980 m/s2 (100 G) 58.8 m/s2 {6 G}, 10 to 55 Hz at double amplitude of 1 mm 117.6 m/s2 {12 G}, 10 to 55 Hz at double amplitude of 2 mm -40C to +70C -40F to +158F 5 to 85% R.H. 1.8 g .063 oz Rating (resistive) Expected life (min. operations) Coil Nominal operating power Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms; detection time: 10s *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10s *7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61) Standard type High sensitivity type 200 mW 150 mW TYPICAL APPLICATIONS * Automotive: Switching to small motor 1) Automirrow controller 2)Retractable head light controller * Push button device: Dial pulsing * Low-voltage signal switching and motor control of small home appliances such as portable video tape recorders and audio devices. * Operating of dish-control motors for PCs and word processors ORDERING INFORMATION Ex. HY 1 Z 3V Contact arrangement 1: 1 Form C Sensitivity Nil: High sensitivity 150 mW Z: Standard 200 mW Coil voltage (DC) 1.5, 3, 4.5, 5, 6, 9, 12, 24 V Standard packing: Carton: 100 pcs. Case 500 pcs. 180 www..com www..com HY TYPES AND COIL DATA (at 20C 68F) Standard packing: Carton: 100 pcs. Case: 500 pcs. 200 mW Standard type Part No. HY1Z-1.5V HY1Z-3V HY1Z-4.5V HY1Z-5V HY1Z-6V HY1Z-9V HY1Z-12V HY1Z-24V Nominal voltage, V DC 1.5 3 4.5 5 6 9 12 24 Pick-up voltage, V DC (max.) 1.125 2.25 3.375 3.75 4.5 6.75 9 18 Drop-out voltage, V DC (min.) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 Coil resistance, (10%) 11.25 45 101.2 125 180 405 720 2,880 Nominal operating current, mA 133.3 66.7 44.5 40 33.3 22.2 16.7 8.3 Nominal operating power, mW 200 200 200 200 200 200 200 200 Max. allowable voltage, V DC (at 70C 158F) 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8 150 mW High sensitivity type Part No. HY1-1.5V HY1-3V HY1-4.5V HY1-5V HY1-6V HY1-9V HY1-12V HY1-24V Nominal voltage, V DC 1.5 3 4.5 5 6 9 12 24 Pick-up voltage, V DC (max.) 1.125 2.25 3.375 3.75 4.5 6.75 9 18 Drop-out voltage, V DC (min.) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 Coil resistance, (10%) 15 60 135 166 240 540 960 3,840 Nominal operating current, mA 100 50 33.3 30.1 25 16.7 12.5 6.25 Nominal operating power, mW 150 150 150 150 150 150 150 150 Max. allowable voltage, V DC (at 70C 158F) 2.1 4.2 6.3 7 8.4 12.6 16.8 33.6 mm inch PC board pattern (Copper-side view) 2.54 .100 7.4 .291 12 .462 7.62 .300 (0.82) (.032) 6-1 dia. 6-.039 dia. DIMENSIONS 10.1 .398 0.5 .020 3.5 .138 0.5 .020 0.4 dia. .016 dia. 2.54 .100 7.62 .300 5.08 .200 2.54 .100 2.54 .100 0.25 .010 (0.82) (.032) 5.08 .200 0.25 .010 Schematic (Bottom view) N.C. COM N.O. General tolerance: 0.3 .012 Tolerance: 0.1 .004 REFERENCE DATA 1. Maximum switching power 2. Life curve 3. Mechanical life Tested sample: HY1Z-12V, 10 pcs. Ambient temperature: 20C to 25C 68F to 77F DC resistive AC resistive Contact current, A 2.0 1.0 300 200 100 Life, x104 50 30 20 10 100 V AC resistive load 30 V DC resistive load Ratio against the rated voltage, %V 5.0 100 90 80 70 60 50 40 30 20 10 0.1 10 30 60 100 300 Contact voltage, V 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Switching current, A 0 10 Min. 100 1,000 2,000 No. of operations, x104 Drop-out voltage Max. Pick-up voltage Max. Min. 0.5 0.2 181 HY 4. Electrical life Tested sample: HY1-12V, 6 pcs. Condition: 1 A 30 V DC resistive load, 30 cpm Change of pick-up and drop-out voltage Ratio against the rated voltage, %V 100 90 80 70 60 50 40 30 20 10 0 10 No. of operations, x104 20 Drop-out voltage Max. Min. Min. Pick-up voltage Max. Change of contact resistance Contact resistance, m Circuit: 80 60 Max. 40 Min. 20 N.C. side: 3 pcs. N.O. side: 3 pcs. 0 10 20 No. of operations, x 104 5-(1). Coil temperature rise (150 mW high sensitivity type) Tested sample: HY1-9V, 5 pcs. Ambient temperature:24C 75F 100 Coil temperature rise, C 90 80 70 60 50 40 30 20 10 0 80 100 120 140 160 180 Coil applied voltage, %V 0A 1A 5-(2). Coil temperature rise (200 mW Standard type) Tested sample: HY1Z-12V, 5 pcs. Ambient temperature: 23C 74F 100 Coil temperature rise, C 90 80 70 60 50 40 30 20 10 0 80 100 120 140 160 180 Coil applied voltage, %V 0A 1A 6. Operate/release time characteristics Tested sample: HY1Z-12V, 5 pcs. Ambient temperature: 25C 77F 3 Operate/release time, ms Operate time 2 1 Release time Max. x Min. Max. x Min. 0 80 100 120 Coil applied voltage, %V 7. Distribution of pick-up and drop-out voltages Tested sample: HY1-12V, 50 pcs. Ambient temperature: 23C 74F 30 25 20 Pick-up voltage 15 10 5 0 Drop-out voltage 8. Distribution of contact resistance Tested sample: HY1-12V, 50 pcs. N.C. side N.O. side 30 25 20 15 10 5 0 N.C. side N.O. side 9. Malfunction shock Tested sample: HY1Z-12V, 6 pcs. Deenergized condition Energized condition Y Z X X' Z' 980m/s 2 Y Y' 980m/s 2 X Quantity Quantity Z 980m/s 2 980m/s 2 Z' 980m/s 2 X' 980m/s 2 Y' 30 40 Contact resistance m 10 20 30 40 50 60 70 80 90 100 Pick-up/drop-out voltage, V NOTE Soldering and cleaning HY relays have the sealed construction. It is possible to do automatic soldering and automatic cleaning, but avoid the ultrasonic cleaning. For cleaning, it is recommended that a fluorinated hydrocarbon or other alcoholic solvent be used. For Cautions for Use, see Relay Technical Information (Page 48 to 76). 182 9/1/2000 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog |
Price & Availability of HY1-XXV |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |