|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Oval Green LED Lamp (5 mm) OVLHGKD8 x x x x x High luminous intensity Defined spatial radiation Multiple viewing angles UV-resistant epoxy Precision optical performance Product Photo Here The OVLHGKD8 is designed for superior performance in outdoor environments. Its radiation pattern matches red (OVLHRKD8), blue (OVLHBKD8), and orange (OVLHQKD8) devices in identical packages to create LED pixels for full-color video screens. Applications x Variable message signs x Indoor/outdoor advertising signage x Traffic and highway signs x Full-color video signs Part Number OVLHGKD8 Material InGaN Emitted Color Green Intensity Typ. mcd 1100 Lens Color Green Diffused 1 ANODE 2 CATHODE RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 12/05 Page 1 of 3 Oval Green LED Lamp (5 mm) OVLHGKD8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, 1KHz) Power Dissipation Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 Note: 1. Solder time less than 3 seconds at temperature extreme. -40 ~ +100 C -40 ~ +95 C 5V 25 mA 100 mA 105 mW 260 C Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL Iv VF IR D PARAMETER Luminous Intensity Forward Voltage Reverse Current Dominant Wavelength 50% Power Angle MIN 770 ------520 ------- TYP 1100 3.6 ---525 110 50 MAX ---4.2 100 535 ------- UNITS CONDITIONS IF = 20 mA IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA mcd V A nm deg deg 2 1/2H-H 2 1/2V-V Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLHGKD8 may be filled with any or all bins contained as below. Standard Bins (IF = 20mA) Luminous Intensity (mcd) 1520-2130 1100-1520 770-1100 520 525 530 535 U T S Luminous intensity is at S bin or above. Dominant Wavelength (nm) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content <1000 PPM. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 12/05 Page 2 of 3 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Oval Green LED Lamp (5 mm) OVLHGKD8 Typical Electro-Optical Characteristics Curves V mA A Forward Current vs Forward Voltage V Reverse Current vs Reverse Voltage 100 175 % Half Power WL = 38nm % 50 25 0 300 400 500 mA 600 700 800 mA Relative Luminous Intensity vs Forward Current Relative Luminous Intensity vs Wavelength 50% Power Angle: H-H: 110 V-V: 50 H-H V-V mA Maximum Forward DC Current vs Ambient Temperature C Far Field Pattern OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 12/05 Page 3 of 3 |
Price & Availability of OVLHGKD8 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |