 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC917LP3E v00.0410 SMT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT Features Output Power: 2 dBm Typical Spurious Suppression: >20 dBc SSB Phase Noise: -148 dBc/Hz @ 100 kHz Offset Single Supply: 5V@ 91 mA 16 Lead 3x3 mm SMT Package: 9mm Typical Applications The HMC917LP3E is Ideal for: * Microwave Radio & VSAT * Military Radios, Radar & ECM * Test Instrumentation 5 FREQ. MULTIPLIERS - ACTIVE - SMT Functional Diagram General Description The HMC917LP3E is an active x4 frequency multiplier housed in a 3x3 mm leadless QFN surface mount package. Power output is 2 dBm typical from a single +5V supply and varies little vs. input power, temperature and supply voltage. Suppression of undesired fundamental and spurious is 20 dBc typical with respect to output signal level. The low additive SSB phase noise of -148 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. The HMC917LP3E is ideal for use in LO multiplier chains allowing reduced parts count versus traditional approaches. Electrical Specifications, TA = +25 C, Vcc = 5V [1] Parameter Frequency Range, Input Frequency Range, Output Input Power Range Output Power Range Spurious Input Return Loss Output Return Loss SSB Phase Noise (100 kHz Offset) Supply Current (Icc) [1] Single-ended operation Pin = +5 dBm 0 Min. Typ. 1.5 - 2.5 6 - 10 5 2 -20 7 12 -148 91 10 Max. Units GHz GHz dBm dBm dBc dB dB dBc/Hz mA 5-1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC917LP3E v00.0410 SMT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT Output Power vs. Temperature @ 0 dBm Drive Level [1] 4 3 Output Power vs. Drive Level, T = 25 C [1] 4 3 OUTPUT POWER (dBm) 2 OUTPUT POWER (dBm) 2 1 1 0 dBm 5 dBm 10 dBm 0 -1 +25C +85C -40C 0 5 9 10 11 -1 -2 5 6 7 8 9 10 11 -2 5 6 7 8 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) Output Power vs. Supply Voltage @ 0 dBm Drive Level, T = 25 C [1] 4 3 Spurious Output vs. Fin Pin = +5 dBm, T = 25 C [1] 10 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 1rst Harmonic 2nd Harmonic 3rd Harmonic 4th Harmonic 5th Harmonic 6th Harmonic 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2 1 0 4.75V 5.0V 5.25V -1 -2 5 6 7 8 9 10 11 -100 OUTPUT FREQUENCY (GHz) INPUT FREQUENCY (GHz) Input Return Loss vs. Temperature [1] 0 +25C +85C -40C Output Return Loss vs. Temperature [1] 0 -5 RETURN LOSS (dB) RETURN LOSS (dB) -5 -10 -15 -10 -20 -25 +25C +85C -40C -15 1.0 1.3 1.5 1.8 2.0 2.2 2.5 2.7 3.0 -30 5 6 7 8 9 10 11 FREQUENCY (GHz) FREQUENCY (GHz) [1] All data shown is single-ended operation For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 5-2 FREQ. MULTIPLIERS - ACTIVE - SMT OUTPUT POWER (dBm) OUTPUT LEVEL (dBm) HMC917LP3E v00.0410 SMT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT SSB Phase Noise vs. Pin Fout = 8 GHz, T = 25 C [1] -120 Icc vs. Temperature [1] 100 SSB PHASE NOISE (dBc/Hz) OPERATING CURRENT (mA) -130 0 dBm 5 dBm 10 dBm 95 +25C +85C -40C 5 FREQ. MULTIPLIERS - ACTIVE - SMT -140 90 -150 85 -160 1.0e+2 80 1.0e+3 1.0e+4 1.0e+5 1.0e+6 1.0e+7 4.7 4.8 4.9 5 5.1 5.2 5.3 OFFSET FREQUENCY (Hz) Vcc (V) Absolute Maximum Ratings RF Input (Vcc = +5V) Vcc Storage Temperature ESD Sensitivity (HBM) +20 dBm +6V -65 to +150 C 150V Reliability Information Junction Temperature To Maintain 1 Million Hour MTTF Nominal Junction Temperature (T = 85 C) Thermal Resistance (Junction to GND paddle, 5V supply) Operating Temperature 150 C 101.4 C 35.4 C/W -40 C to + 85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS [1] All data shown is single-ended operation 5-3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC917LP3E v00.0410 SMT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT Outline Drawing 5 FREQ. MULTIPLIERS - ACTIVE - SMT 5-4 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number HMC917LP3E Package Body Material RoHS-compliant Low Stress Injection Molded Plastic Lead Finish 100% matte Sn MSL Rating MSL1 [2] Package Marking [1] 917 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 C For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC917LP3E v00.0410 SMT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT Pin Description Pin Number 1, 4 - 9, 12, 13, 15, 16 Function GND Description These pins and exposed paddle must be connected to RF/DC ground. This pin is AC coupled and matched to 50 ohms, and is 180 out of phase with pin 3 for differential operation. RF/DC ground for single ended operation. This pin is AC coupled and matched to 50 ohms This pin is AC coupled and matched to 50 ohms This pin is AC coupled and matched to 50 ohms, and is 180 out of phase with pin 10 for differential operation. Terminate in 50 ohms for single ended operation. Interface Schematic 5 FREQ. MULTIPLIERS - ACTIVE - SMT 2 3 10 11 RFNIN (or GND) RFIN RFOUT RFNOUT 14 Vcc Supply voltage +5V 5-5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC917LP3E v00.0410 SMT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT Evaluation PCB 5 FREQ. MULTIPLIERS - ACTIVE - SMT 5-6 List of Materials for Evaluation PCB 128383 Item J1 - J3 J4, J5 C1 C2 C3 U1 PCB [2] Description PCB Mount SMA Connector DC Pin 100 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0402 Pkg. 4.7 F Capacitor, 0402 Pkg. HMC917LP3E x4 Active Multiplier 128702 Eval Board [1] The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com |
Price & Availability of HMC917LP3E
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |