 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PL planar inductors EU features * Extremely low-profile power choke coil which height is 0.5mm Max. in 2.5 x 2.0mm size, 0.5 0.1mm in 3.2 x 2.5mm size. High current type with maximum allowable current 800mA * Eddy current loss is suppressed by a proprietary structural design * Marking: Black body color with marking * Products with lead-free terminations meet EU RoHS and China RoHS requirements inductors dimensions and construction E L t Resin filler Coil Pattern D F D Electrode W Ferrite Size (Inch Size Code) L W Dimensions inches (mm) t D E F PL2520 (1008) Ferrite PL3225 (1210) .098.008 .079.008 .020 Max. .024.008 .028.008 .024.008 (2.50.2) (2.00.2) (0.5 Max.) (0.60.2) (0.70.2) (0.60.2) .126.008 .098.008 .020.004 .024.008 .031.008 .047.008 (3.20.2) (2.50.2) (0.50.1) (0.60.2) (0.80.2) (1.20.2) ordering information New Part # PL Type 3225 Size 2.5 x 2.0mm 3.2 x 2.5mm T Termination Material T: Sn TE Packaging TE: 4mm embossed pitch plastic (4,000 pieces/reel) 1R1 Nominal Inductance 3 digits (Unit: H) M Tolerance M:20% applications and ratings Part Designation PL2520TTER33M PL2520TTER56M PL2520TTER62M PL2520TTE1R0M PL2520TTE1R5M PL2520TTE2R2M PL2520TTE3R3M PL2520TTE4R3M PL2520TTE4R7M Marking R33 R56 R62 1R0 1R5 2R2 3R3 4R3 4R7 Inductance (H) 0.33 0.56 0.62 1.0 1.5 2.2 3.3 4.3 4.7 Inductance Tolerance DC Resistance Maximum () 0.06 0.10 0.11 0.18 0.31 0.59 0.92 1.24 1.26 Allowable DC Current Maximum (mAmps)** 1100 790 770 610 510 380 330 240 230 Self Resonant Frequency Minimum (MHz) 260 200 200 120 110 100 80 70 60 Measured Frequency (Hz) Operating Temperature Range M: 20% 1 MHz -40C to +125C ** Allowable DC current is the values given based on the rate of inductance change 30% decrease from the initial value at 25% For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/08/09 230 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com PL planar inductors applications and ratings (continued) Part Designation PL3225TTE1R1M PL3225TTE1R5M PL3225TTE2R2M PL3225TTE2R7M PL3225TTE3R3M PL3225TTE4R7M PL3225TTE5R1M Marking 1R1 1R5 2R2 2R7 3R3 4R7 5R1 Inductance (H) 1.1 1.5 2.2 2.7 3.3 4.7 5.1 Inductance Tolerance DC Resistance Maximum () 0.11 0.15 0.23 0.28 0.50 0.60 0.60 Allowable DC Current Maximum (mAmps) 800 600 500 400 350 300 300 Self Resonant Frequency Minimum (MHz) 130 120 90 70 60 50 50 Measured Frequency (Hz) Operating Temperature Range M: 20% 1 MHz -40C to +125C 3 R environmental applications PL2520 5 Inductance (nH) 4 3 2 1 0 3R3 2R7 2R2 1R5 1R0 R62 R56 R33 0.1 1 10 Frequency (MHz) 100 4R7 Inductance (nH) 6 Temperature Rise (C) 60 50 40 30 20 10 0 0 4R7 4R7 4R3 3R3 5 4 3R3 2R2 1R5 1R0 R62 R56 R33 inductors 1500 L - Frequency Characteristics DC Bias Characteristics Surface Temperature Rise 4 3 4R3 2 1 0 0 500 2R2 1R5 1R0 R62 R56 R33 1000 PL3225 10 Inductance (nH) Inductance (nH) 1 1500 DC Bias (mA) 2000 2500 200 400 600 800 1000 1200 1400 1600 1800 2000 DC Bias (mA) 6 5 3 5R1 4R7 3R3 2R7 2R2 1R5 1R1 0.1 1 Frequency (MHz) 1 10 100 4R7 5R1 Temperature Rise (C) 50 40 30 20 10 0 0 500 8 6 4 2 0 0.01 5R1 4R7 2R7 3R3 2R2 1R5 1R1 4 3 2 1 0 0 200 400 600 800 3R3 2R7 2R2 1R5 1R1 1000 1200 1000 DC Bias (mA) T DC Bias (mA) Performance Characteristics Parameter Resistance to Soldering Heat Requirements Maximum L Limit Typical L/L: 2.5% L/L: 1.5% L/L: 1.0% L/L: 1.5% L/L: 1.5% L/L: 0.5% 260C 5C, 10s 1s Test Method Without distinct damage in appearance and construction L/L: 10% Without distinct damage in appearance and construction L/L: 10% Without distinct damage in appearance and construction L/L: 10% Without distinct damage in appearance and construction L/L: 10% Without distinct damage in appearance and construction L/L: 10% Without distinct damage in appearance and construction L/L: 10% Rapid Change of Temperature -40C (30min.)/ +125C (30min.) 100 cycles Low Temperature Exposure -40C 3C, 1000h High Temperature Exposure 125C 2C, 1000h Moisture Exposure 40C 2C, 90%~95%RH, 1000h Resistance to Solvent Accordance with MIL-STD 202G Method 215 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/23/08 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 231 |
Price & Availability of PL3225TTE1R1M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |