View RRH040P03_5046015.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

4V Drive Pch MOSFET
RRH040P03
Structure Silicon P-channel MOSFET Features 1) Low Gate Charge. 2) Built-in G-S Protection Diode. 3) Small Surface Mount Package (SOP8). Application Switching
Each lead has same dimensions
Dimensions (Unit : mm)
SOP8
Packaging specifications
Package Type RRH040P03 Code Basic ordering unit (pieces) Taping TB 2500
Inner circuit
(8) (7) (6) (5)
2 1
(1) Source (2) Source (3) Source (4) Gate (5) Drain (6 )Drain (7) Drain (8) Drain
(1)
(2)
(3)
(4)
1 ESD PROTECTION DIODE 2 BODY DIODE
Absolute maximum ratings (Ta = 25C)
Parameter Drain-source voltage Gate-source voltage Continuous Drain current Source current (Body Diode) Pulsed Continuous Pulsed Symbol VDSS VGSS ID IDP Is Isp PD
1 2 1
Limits -30 20 4 16 -1.6 -16 2.0 150 -55 to +150
Unit V V A A A A W
Total power dissipation Channel temperature Range of storage temperature
1 Pw10s, Duty cycle1% 2 Mounted on a ceramic board.
Tch Tstg
C C
Thermal resistance
Parameter Channel to Ambient
Mounted on a ceramic board.
Symbol Rth (ch-a)
Limits 62.5
Unit
C / W
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
1/5
2009.12 - Rev.A
RRH040P03
Electrical characteristics (Ta = 25C)
Parameter Gate-source leakage Drain-source breakdown voltage Zero gate voltage drain current Gate threshold voltage Static drain-source on-state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Total gate charge Gate-source charge Gate-drain charge
Pulsed
Data Sheet
Symbol
IGSS V (BR)DSS IDSS VGS (th) RDS (on) l Yfs l Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd
Min.
- -30 - -1.0 - - - 3 - - - - - - - - - -
Typ.
- - - - 55 85 95 - 480 70 70 7 18 50 37 5.2 1.6 1.6
Max.
10 - -1 -2.5 75 115 125 - - - - - - - - - - -
Unit
A V A V
Test Conditions VGS=20V, VDS=0V ID=-1mA, VGS=0V VDS=-30V, VGS=0V VDS=-10V, ID=-1mA ID=-4A, VGS=-10V
m
ID=-2A, VGS=-4.5V ID=-2A, VGS=-4V
S pF pF pF ns ns ns ns nC nC nC
ID=-4A, VDS=-10V VDS=-10V VGS=0V f=1MHz ID=-2A, VDD VGS=-10V RL=7.5 RG=10 ID=-4A, VDD VGS=-5V RL=3.8 RG=10 -15V
-15V
Body diode characteristics (Source-Drain) (Ta = 25C)
Parameter Forward Voltage
Pulsed
Symbol VSD
Min. -
Typ. -
Max. -1.2
Unit V
Test Conditions Is=-4A, VGS=0V
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
2/5
2009.12 - Rev.A
RRH040P03
Electrical characteristic curves
10 8 6 4 VGS= -3.0V 2 VGS= -2.5V 0 0 0.2 0.4 0.6 0.8 1 VGS= -10V VGS= -4.5V VGS= -4.0V VGS= -3.5V Ta=25C Pulsed 20 18 Ta=25C Pulsed 10
Data Sheet
DRAIN CURRENT : -ID[A]
DRAIN CURRENT : -ID[A]
DRAIN CURRENT : -ID[A]
16 14 12 10 8 6 4 2 0 0
VGS= -10V
VDS= -10V Pulsed Ta= 125C Ta= 75C Ta= 25C Ta= - 25C
1
VGS= -4.0V VGS= -3.5V VGS= -3.0V
0.1
0.01 2 4 6 8 10 1 1.5 2 2.5 3
DRAIN-SOURCE VOLTAGE : -VDS[V] Fig.1 Typical Output Characteristics()
DRAIN-SOURCE VOLTAGE : -VDS[V] Fig.2 Typical Output Characteristics()
GATE-SOURCE VOLTAGE : -VGS[V] Fig.3 Typical Transfer Characteristics
STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[m]
1000
STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[m]
STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[m]
Ta=25C Pulsed VGS= -4.0V VGS= -4.5V VGS= -10V
1000
VGS= -10V Pulsed
1000
Ta=125C Ta=75C Ta=25C Ta= -25C
VGS= -4.5V Pulsed
Ta=125C Ta=75C Ta=25C Ta= -25C
100
100
100
10 0.1 1 DRAIN-CURRENT : -ID[A] Fig.4 Static Drain-Source On-State Resistance vs. Drain Current() 10
10 0.1 1 DRAIN-CURRENT : -ID[A] Fig.5 Static Drain-Source On-State Resistance vs. Drain Current() 10
10 0.1 1
DRAIN-CURRENT : -ID[A] Fig.6 Static Drain-Source On-State Resistance vs. Drain Current()
10
STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[m]
FORWARD TRANSFER ADMITTANCE : |Yfs| [S]
VGS= -4.0V Pulsed
Ta=125C Ta=75C Ta=25C Ta= -25C
VDS= -10V Pulsed
REVERSE DRAIN CURRENT : -Is [A]
1000
10
10
VGS=0V Pulsed
1
100
1 Ta= -25C Ta=25C Ta=75C Ta=125C 0.1
0.1
Ta=125C Ta=75C Ta=25C Ta=-25C 0 0.5 1 1.5
10 0.1 1 DRAIN-CURRENT : -ID[A] Fig.7 Static Drain-Source On-State Resistance vs. Drain Current() 10
0.01
0.1
1
10
0.01
DRAIN-CURRENT : -ID[A] Fig.8 Forward Transfer Admittance vs. Drain Current
SOURCE-DRAIN VOLTAGE : -VSD [V] Fig.9 Reverse Drain Current vs. Sourse-Drain Voltage
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
3/5
2009.12 - Rev.A
RRH040P03
Data Sheet
300
STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[m]
10000 Ta=25C Pulsed
SWITCHING TIME : t [ns] GATE-SOURCE VOLTAGE : -VGS [V]
250 200 150 100 50 0 0 5 10 ID= -2.0A
1000
td(off) tf
Ta=25C VDD= -15V VGS=-10V RG=10 Pulsed
5 4 3 2 1 0 0 1 2 3 Ta=25C VDD= -15V ID= -4.0A RG=10 Pulsed 4 5 6
ID= -4.0A
100 td(on) 10 tr 1 0.01 0.1 1 10
15
GATE-SOURCE VOLTAGE : -VGS[V] Fig.10 Static Drain-Source On-State Resistance vs. Gate Source Voltage
DRAIN-CURRENT : -ID[A] Fig.11 Switching Characteristics
TOTAL GATE CHARGE : Qg [nC] Fig.12 Dynamic Input Characteristics
10000
CAPACITANCE : C [pF]
Ta=25C f=1MHz VGS=0V 1000
Ciss
100 Crss Coss 10 0.01 0.1 1 10 100
GATE-SOURCE VOLTAGE : -VDS[V] Fig.13 Typical Capacitance vs. Drain-Source Voltage
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
4/5
2009.12 - Rev.A
RRH040P03
Measurement circuit
Pulse Width
VGS ID RL D.U.T. VDS
Data Sheet
VGS
10% 50% 10%
90%
50% 10% 90%
RG VDD
VDS
90% td(on) ton tr td(off) toff
tf
Fig.1-1 Switching Time Measurement Circuit
Fig.1-2 Switching Waveforms
VG
VGS ID RL IG(Const.) RG VDD D.U.T. VDS
Qg VGS Qgs Qgd
Charge
Fig.2-1 Gate Charge Measurement Circuit
Fig.2-2 Gate Charge Waveform
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
5/5
2009.12 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved.
R0039A

▲Up To Search▲

Price & Availability of RRH040P03

	To Download RRH040P03 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .