 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SAW Bandpass Filter F1G95 Features US-PCS applications Usable bandwidth of 30 MHz No impedance matching require for operation at 50 SMD Package 2.0 mm x 1.6 mmx 0.7 mm Single-ended Operation RoHS Compliant Package Dimensions 4 3 3 4 1 2 2 1 Pin Configurations 1 2 3 4 Input Case Ground Output Case Ground Maximum Ratings Parameters Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit dBm Minimum -30 -30 Typical 25 Maximum 85 85 13 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G95 2007-08-30 NC7006-AS01 1/7 SAW Bandpass Filter F1G95 Specifications Minimum Center Frequency ( Fc ) Insertion Loss (Fo +/- 30 MHz) Amplitude Ripple (Fo +/- 30 MHz) VSWR (Fo +/- 30 MHz) Relative Attenuation D.C. ~ 1850 MHz 1850 ~ 1910 MHz 2010 ~ 2070 MHz 3860 ~ 3980 MHz 5790 ~ 5970 MHz 26.0 15.0 15.0 28.0 33.0 34.0 21.0 21.0 37.0 33.0 dB Typical 1960 2.3 0.6 2.0 Maximum 2.7 1.7 2.4 Unit MHz dB dBp-p Temperature Range (Operational) Input RF Power (Fo +/- 30 MHz) Input/Output Impedance -30 25 85 13 dBm Ohms 50 Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G95 2007-08-30 NC7006-AS01 2/7 SAW Bandpass Filter F1G95 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50 Output 50 Marking Configuration 1) AN 2) A1 3) 1) Index Mark 2) Part Number Mark ( ITF Standard Rule ) 3) Lot Number ( ITF Standard Rule ) * Ink or Laser Marking available * Marking configuration depends on ITF standard rules. I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G95 2007-08-30 NC7006-AS01 3/7 SAW Bandpass Filter F1G95 Typical Performance ( at 25 ) CH1 S21 LOG 5 dB/ REF 0 dB 30 Aug 2007 11:56:43 5:-27 . 360 dB 2 010. 000 000 MHz 1 2 CH1Markers 1:-2 . 2677 dB 1. 93000 GHz 2:-2 . 5564 dB 1. 99000 GHz 3:-40 . 858 dB 1. 85000 GHz 4:-25 . 178 dB Cor 5 4 1. 91000 GHz 3 CENTER 960. 000 000 MHz 1 SPAN 300. 000 000 MHz CH1 S21 LOG 5 dB/ REF 0 dB 30 Aug 2007 11:48:26 1:-40 . 189 dB 1 850. 000 000 MHz CH1Markers Cor 2:-31 . 957 dB 2. 07000 GHz 2 1 START . 010 000 MHz STOP3 000. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G95 2007-08-30 NC7006-AS01 4/7 SAW Bandpass Filter F1G95 Input / Output VSWR Charts CH1 S11 SWR 1/ REF 1 30 Aug 2007 11:58:57 1: 1. 3673 1 930. 000 000 MHz CH1 S11 1 U FS 5: 4. 0137 -12 . 971 30 Aug 2007 11:58:05 6. 1046 pF 2 010. 000 000 MHz CH1 Markers Cor 2: 2. 1118 1. 99000 GHz 4 Cor 3 CH1 Markers 1: 38. 947 8. 3613 1. 93000 GHz 2: 24. 232 -6 . 7568 1. 99000 GHz 3: 2. 2158 21. 878 1. 85000 GHz 4: 11. 420 1 43. 283 1. 91000 GHz 2 5 1 2 CENTER1 960. 000 000 MHz SPAN 300. 000 000 MHz CENTER1 960. 000 000 MHz SPAN 300. 000 000 MHz Input / Output Smith Charts CH1 S22 SWR 1/ REF 1 30 Aug 2007 11:59:08 1: 1. 2018 1 930. 000 000 MHz CH1 S22 1 U FS 5: 5. 1895 -23 . 845 30 Aug 2007 11:58:20 3. 3207 pF 2 010. 000 000 MHz CH1 Markers Cor 2: 2. 0817 1. 99000 GHz Cor 3 CH1 Markers 4 1: 53. 461 8. 8262 1. 93000 GHz 2: 32. 230 -24 . 344 1. 99000 GHz 3: 2. 4717 21. 015 1. 85000 GHz 4: 12. 385 1 62. 684 1. 91000 GHz 2 5 1 CENTER1 960. 000 000 MHz 2 SPAN 300. 000 000 MHz CENTER1 960. 000 000 MHz SPAN 300. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G95 2007-08-30 NC7006-AS01 5/7 SAW Bandpass Filter F1G95 Packing Specification 1. Reeling Quantity : 3000 pcs / 13" reel ( or 1000 pcs / 7" reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Top cover tape Direction of pull 3. Top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g Carrier tape 0~15 degree I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G95 2007-08-30 NC7006-AS01 6/7 SAW Bandpass Filter F1G95 Carrier Tape Dimensions [unit : mm] Top Cover Tape Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G95 2007-08-30 NC7006-AS01 7/7 |
Price & Availability of F1G95
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |