|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
U15 SERIES DC/DC MODULES Specifications & Features Summary * Servers, Switches and Data Storage * Wireless Communications * Distributed Power Architecture * Semiconductor Test Equipment Applications * Networking Gear * Data Communications * Telecommunications * Industrial / Medical The U15 Family of high efficiency DC/DC converters offer power levels of up to 15 Watt. With ultra-wide input voltage range and single and multi-outputs, these converters provide versatility without sacrificing the board space. All models feature an input Pi filter and continuous short circuit protection. The fully enclosed, encapsulated construction achieves very efficient heat transfer with no hot spots. All converters combine creative design practices with highly derated power devices to achieve very high reliability, high performance and low cost solution to systems designers. SPECIFICATIONS Input Specifications Input Voltage Range Input Filter Output Specifications Voltage Accuracy Single Output Dual +Output -Output Triple, 5V 12V / 15V Voltage Balance(Dual) Transient Response: Single, 25% Step Load Change Dual,FL-1/2L +/- 1% Error Band External Trim Adj. Range Ripple and Noise, 20MHz BW Temperature Coefficient Short Circuit Protection Line Regulation, Single/Dual Triple Load Regulation, Single/Dual Triple General Specifications Efficiency Isolation Voltage Isolation Resistance Switching Frequency Case Grounding Operating Temperature Range Case Temperature Cooling Storage Temperature Range EMI / RFI Dimensions Case Material Notes: 1. 2. 12V----------9-36V 48V--------18-72V Pi Type * 500Vdc minimum, 10M input-to-output isolation * No airflow or heatsink required * Enclosed six-sided metal shield construction for low EMI/RFI * Efficiency to 82% * 4:1 Input Range * Pi Input Filter * Continuous Short Circuit Protection Approval Pending * Remote On/Off Control * Delivers up to 15W in 2"x2" package with Industry-Standard Pinouts Model Num U15-12S5 U15-12S12 U15-12S15 U15-12D5 U15-12D12 U15-12D15 U15-12T5-12 U15-12T5-15 U15-12S3.3 U15-48S5 U15-48S12 U15-48S15 U15-48D5 U15-48D12 U15-48D15 U15-48T5-12 U15-48T5-15 U15-48S3.3 VIn 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC VOut 5.0 VDC 12.0 VDC 15.0 VDC 5.0 VDC 12.0 VDC 15.0 VDC 12.0/5.0 VDC 15.0/5.0 VDC 3.3 VDC 5.0 VDC 12.0 VDC 15.0 VDC 5.0 VDC 12.0 VDC 15.0 VDC 12.0/5.0 VDC 15.0/5.0 VDC 3.3 VDC IOut 3.0A 1.25A 1.0A 1.5A 0.625A 0.5A 0.31A/1.5A 0.25A/1.5A 3.0A 3.0A 1.25A 1.0A 1.5A 0.625A 0.5A 0.31A/1.5A 0.25A/1.5A 3.0A INo Load 15.0 mA 15.0 mA 15.0 mA 20.0 mA 20.0 mA 20.0 mA 20.0 mA 20.0 mA 15.0 mA 10.0 mA 10.0 mA 10.0 mA 15.0 mA 15.0 mA 15.0 mA 15.0 mA 15.0 mA 10.0 mA IFull Load 810.0 mA 780.0 mA 780.0 mA 810.0 mA 780.0 mA 780.0 mA 780.0 mA 780.0 mA 545.0 mA 410.0 mA 390.0 mA 390.0 mA 400.0 mA 380.0 mA 380.0 mA 380.0 mA 380.0 mA 270.0 mA Eff 77% 80% 80% 77% 80% 80% 80% 80% 76% 77% 80% 80% 79% 82% 82% 82% 82% 76% Case W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 +/-1.0% max. +/-1.0% max. +/-3.0% max. +/-2.0% max. +/-3.0% max. +/-1.0% max. <500u sec. <500u sec. +/-10% 10mV RMS. Max. 75mV p-p max. +/-0.02% / oC Continuous +/-0.2% max. +/-1.0% max. +/-1.0% max. +/-5.0% max. Up to 82% 500 VDC min 109 ohms 300KHz, min Connected to Output Common -25oC to +71oC 100oC max. Free-Air Convection -55oC to +105oC Six Sided Continuous Shield 2X2X0.4 Inches (50.8X50.8X10.2mm) Black Coated Copper w/Non-Conductive Base Measured From High Line to Low Line Measured From Full Load to 1/4 Load Typical at Ta= +25 C under nominal line voltage and 75% load conditions, unless noted. The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. The output voltage can be trimmed (10%) using an external resistor. To trim the output up (down) connect a resistor between pins 5 and 6 (7). A 10K trim pot can also be used to make the output variable. Connect the wiper to pin 5 and make the other connections to pins 6 and 7. Consult factory for hundreds of other input / output voltage configurations BOTTOM VIEW U15 FAMILY 8 0.40 [10.16] 4 0.60 [15.24] 7 6 0.40 [10.16] 0.80 [20.32] 2.00 [50.80] REMOTE ON/OFF CONTROL Logic Compatibility EC-On EC-Off Shutdown Idle Current Input Resistance Control Common CMOS or Open Collector TTL >+5.5Vdc or Open Circuit <1.8Vdc 10mA 100K ohms (Ein 0 Vdc to 9 Vdc) Referenced to Input Minus 3 0.40 [10.16] 0.30 [7.62] 2 1 5 0.20 [5.08] 0.10 [2.54] 1.80 [45.72] 2.00 [50.80] 0.20 [5.08] SIDE VIEW 0.40 [10.2] Pin # 1 2 3 4 5 6 7 8 S(ingle) On/Off No Pin Vin Vin + Trim Vout Vout + No Pin D(ual) On/Off No Pin Vin Vin + Trim Vout Common Vout + T(riple) On/Off No Pin Vin Vin + - Aux. Out Common +5Vout + Aux. Out Triple Output Loading Table (1) Amperes Voltage Min. (2) Nom. +12(15) or -12(15) +5 +12(15) or -12(15) 0.10 0.25 0.10 0.31(0.25) 1.5 0.31(0.25) All dimensions are in inches [mm]. All pins are dia. 0.040 [1.02] Tolerances: .XX= 0.04, .XXX= 0.010 Maximum total power from all outputs is limited to 15 watts, but no output should be allowed to exceed its maximum current. Minimum current on each output is required to maintain specified regulation. Intronics Power Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 Phone: 1-781-551-5500 Fax: 1-781-551-5555 Rev. B * * |
Price & Availability of U15-12T5-12 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |