 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Series AM15CW-Z 15Watt | DC-DC Converter FEATURES: * * * * * Ultra compact footprint 1"x1" Ultra-wide Input Range 4:1 1600 VDC Isolation Remote ON/OFF Function No Minimum Load Required * * * * * Adjustable Output Voltage Operating Temperature -40C to +85C Over Current and Over Voltage Protection Efficiency up to 89% RoHS Compliant CE Models Single output Model AM15CW-2403SZ AM15CW-2405SZ AM15CW-2412SZ AM15CW-2415SZ AM15CW-4803SZ AM15CW-4805SZ AM15CW-4812SZ AM15CW-4815SZ Input Voltage (V) 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 Output Voltage (V) 3.3 5 12 15 3.3 5 12 15 Output Current max (A) 4 3 1.3 1 4 3 1.3 1 Isolation (VDC) 1600 1600 1600 1600 1600 1600 1600 1600 Efficiency (%) 86 87 88 89 84 86 87 88 Models Dual output Model AM15CW-2405DZ AM15CW-2412DZ AM15CW-2415DZ AM15CW-4805DZ AM15CW-4812DZ AM15CW-4815DZ Input Voltage (V) 9-36 9-36 9-36 18-75 18-75 18-75 Output Voltage (V) 5 12 15 5 12 15 Output Current max (A) 1.5 0.625 0.5 1.5 0.625 0.5 Isolation (VDC) 1600 1600 1600 1600 1600 1600 Efficiency (%) 85 88 89 84 87 88 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Filter Start up time Absolute Maximum Rating Peak Input Voltage time On/Off control No load current Under voltage lockout Input reflected ripple current Nominal 24 48 Nominal Vin with constant resistive load 24 Vin 48 Vin Typical 9-36 18-75 20 Maximum Units VDC ms 50 VDC 100 100 ms ON -3 to 12VDC (or open) ; OFF - 0 to 1.2VDC or short pin 2 to pin 3; OFF idle current - 5mA 15 mA 24 Vin ON/OFF 8.5 /7 VDC 48Vin ON/OFF 17/15 20 mA p-p www.aimtec.com F 051e R11 Tel: +1 514 620 2722 1 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-Z 15Watt | DC-DC Converter Isolation Specifications Parameters Tested I/O voltage Case to Input Case to Output Resistance Capacitance Conditions 3 sec 3 sec 3 sec Typical 1600 1600 1600 >1000 Maximum Units VDC VDC VDC MOhm pF 1200 Output Specifications Parameters Voltage accuracy Cross Regulation (Dual Output Models) Over voltage protection Over current protection Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise Voltage adjustment range 25% load on one output - 100% load on second load Zener Diode Clamp Full Load Conditions Typical 1 5 120 170 Continuous Auto-Recovery 0.2 0.5 1 0.02 100 10 Maximum Units % % % % HL-LL 0% to 100% load 0% to 100% balanced load 20MHz Bandwidth Trim - Single output models only % % % %/oC mV p-p % General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Transient recovery time Transient recovery deviation Conditions 100% load With derating above +55C -40 to +125 Typical 375 Maximum Units KHz o C o C o C %/ oC % RH g o -40 to +85 100 2.6 Free air convection 95 Nickel-coated copper 18 1.00 x 1.00 x 0.40 inches 25.40 x 25.40 x 10.16 mm > 560,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5mm from case for 10 sec 260 Load step change 75% to 50% to 25% 250 Load step change 75% to 50% to 25% 3 C S % Safety Specifications Parameters Agency Approvals Standards CE EN 55022 Class A EN 61000-4-2 Perf. Criteria A EN 61000-4-3 Perf. Criteria A EN 61000-4-4 Perf. Criteria A (external 220uF/100V cap required) EN 61000-4-5 Perf. Criteria A (external 220uF/100V cap required) EN 61000-4-6 Perf. Criteria A EN 61000-4-8 Perf. Criteria A NOTE: also designed to meet IEC/EN 60950-1 www.aimtec.com F 051e R11 Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-Z 15Watt | DC-DC Converter Pin Out Specifications Pin 1 2 3 4 5 6 Single + V input - V input On/Off Control + V output Trim - V output Dual + V input - V input On/Off Control + V output Common - V output Dimensions Top View 25.40 (1.00) 4 Trimming Bottom View 10.16 (0.40) 10.16 2.54 (0.40) (0.10) +V Output Trim -V Output 5 6 +V -V Input Input CTRL 1 10.16 (0.40) 2 3 5.08 7.62 (0.20) (0.30) Side View Printed Face 2.54 (0.10) 1.00 (0.39) Derating Free Air Convection 55 C 100 Output Power (%) 80 60 40 20 0 - 40 - 20 0 20 40 60 80 85 Safe Operating Area 100 Ambient Temperature C www.aimtec.com F 051e R11 Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-Z 15Watt | DC-DC Converter Test Circuits Notes 1. Input filter (C1, C2, L) are needed to meet conducted emission (EN 55022 Class A) and should be mounted as close as possible to the converter. L 12uH + C1 2.2uF/100V C2 2.2uF/100V +V input +V output DC/DC Converter - V input -V output Load NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.5..Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 5. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. www.aimtec.com F 051e R11 Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only |
Price & Availability of AM15CW-2403SZ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |