|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
POWER RELAY 1 POLE-- 8A (65 A HIGH INRUSH CURRENT) JS-KS SERIES n FEATURES l l l l l RoHS compliant l l l l l l Inrushcurrent65A,1,000W,lampload ULclassB(130C)coilwireinsulation 1formA(SPST-NO) Contactapplication3(CA3) Low profile and space saving--Height: 12.5 mm --Mounting space: 290 mm2 High sensitivity in small package --Operating power ............. 110to140mW --Nominal power ................ 220 to 290m W High isolation in small package --Insulation distance : 8 mm (betweencoilandcontacts) --Dielectric strength : 5,000 VAC --Surge strength : 10,000 V Plasticmaterials --UL 94 flame class V-0 --UL CTI level class 2 Plastic sealed type High current contact capacity RoHS compliant since date code: 0438B9, 0434R - Please see page 5 for more information n APPLICATIONS l l l I/Omodule Timer HVAC n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) JS - 12 (a) (*) (b) M (c) N-K (d) (e) S (f) Series Name Nominal Voltage Contact Arrangement Contact Material Enclosure JS : JS Series Refer to the COIL DATA CHART M : 1 form A (SPST-NO) N : AgSnO2 + Au 0.3m K : Plastic sealed type (f) Construction S : 5.0 mm (lamp load 1,000W, 230 VAC, 25k operations)) Note: Actual marking omits the hyphen (-) of (*) 1 JS-KS SERIES n PART NUMBERS Terminal pitch: 5.0mm OrderP/N JS-5M N-KS JS-6M N-KS JS-9M N-KS JS-12M N-KS JS-18M N-KS JS-24M N-KS JS-48M N-KS JS-60M N-KS JS Series Voltage 5 6 9 12 18 24 48 60 M: 1 form A N: AgSnO2 + Au 0.3m K: Plastic Seal S: 5.0 mm Contact Arrangement Contactmaterial Enclosure Terminal Pitch n COIL DATA CHART Coil voltage 5 6 9 12 18 24 48 60 Nominal voltage 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC 48 VDC 60 VDC Maximum voltage*1 11.8 VDC 14.1 VDC 21.2 VDC 28.3 VDC 42.4 VDC 56.6 VDC 105.6 VDC 132.0 VDC Coilresistance Must operate (10%) voltage*2 112 160 360 660 1,455 2,350 8,000 12,500 3.5 VDC 4.2 VDC 6.3 VDC 8.5 VDC 12.7 VDC 16.8 VDC 33.4 VDC 41.7 VDC Must release voltage*2 0.5 VDC 0.6 VDC 0.9 VDC 1.2 VDC 1.8 VDC 2.4 VDC 4.8 VDC 6.0 VDC Nominal Power 225 mW 225 mW 225 mW 220 mW 225 mW 245 mW 290 mW 290 mW Note : All values in the table are measured at 20C. *1: No contact current at 20C. *2: Specified values are subject to pulse wave voltage. 2 JS-KS SERIES n SPECIFICATIONS Item Contact Arrangement Material Resistance(initial) Rating Max. carrying current Max. switching power Max. switching voltage Min. switching load* Coil Nominal power (at 20C) Operate power (at 20C) Operating temperature (at 20C) Time value Life Operate Release(withoutdiode) Mechanical Electrical ACratedload DC rated load Lampload Vibration resistance Shock resistance Weight * JS ( )MN-KS 1FormA(SPST-NO) AgSnO2+Au 100m Ohm max., (1A 6VDC) 8A 250 VAC / 24 VDC 10A 2,000 VA / 192 W 400 VAC/ 150 VDC 100 mA 5 VDC 220 to 290 mW 110to140mW -40C to +85C (no frost) Max. 10 ms (at nominal voltage, without bounce) Max. 5 ms (at nominal voltage, without bounce) Min. 20x106operations Min. 100x103operations Min. 100x103operations 1,000 W 25x103 operations at 230VAC 10 to 55 Hz at double amplitude of 1.65 mm 10 to 55 Hz at double amplitude of 3.3 mm Min. 100 m/s2(111ms) Approx. 8 g Min. 1,000 m/s2(61ms) Misoperation 1s Endurance 1s Misoperation Endurance Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. n INSULATION Items Resistive (at 5,000 VDC) Dielectric Strength Opencontacts Coilandcontacts Surge strength (coil and contacts) Clearance / crepage Isolation (DIN EN 61810-1 VDE 0435) Voltage Pollution Isolation material group Isolation category / Reference voltage Min. 1,000 M 1,000 VAC (50/60 Hz) 1 min. 5,000 VAC (50/60 Hz) 1 min. 10,000 V (1.2 x 50 s standard wave) 6 mm / 8 mm 250 V 3 IIIa C / 250V 3 JS-KS SERIES n SAFETY STANDARD (VDE 01106) Type UL CSA VDE Compliance UL 508 E56140 C22.2 No. 14 LR 35579 0435, 0660, 40013847 Contact rating Flammability: UL 94-V0 (plastics) 8 A 24 VDC (resistive) 100k operations 8 A 250 VAC (resistive) 100k operations Pilot duty: A300, R300 AC: 15, 100x103 DC: 13, 100x 103 n REFERENCE DATA Nominal Voltage Multiplying Factor Nominal Voltage Multiplying Factor 80 CoilTemperatureRise 2.4 1.8 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0 Operating Range JSType (5V to 18 VDC) 10 Operating Range 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0 Must Op Must ot Coil) ltage (H erate Vo oil) (Cool C Voltage Operate 10 A Temperature Rise (deg.) JSType 60 10A 8A JSType (24 VDC) 0A 8A 8A A 0A 40 20 0 0 0 0.2 0.4 0.6 0.8 Must Op ltage (H erate Vo ot Coil) ool Coil) Must Op ltage (C erate Vo 20 40 60 80 100 20 40 60 80 100 CoilPower(W) AmbientTemperature(C) Maximum Switching Power AmbientTemperature(C) Live Curves 100 50 250VAC resistive 24VDC resistive Operating Range Nominal Voltage Multiplying Factor 2.4 1.8 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0 ot Coil) ltage (H erate Vo Must Op ool Coil) ltage (C erate Vo Must Op 10 10 5 JSType (60V to 48 VDC) 8A A JS type Operations(x104) CurrentA 20 30 40 AmbientTemperature(C) 0A AC Resistive Load 2 1 0.5 DC Resistive Load 0.2 0.1 20 10 5 250VAC cos=0.7 24VDC =7ms 250VAC cos=0.4 24VAC =15ms 2 60 80 100 10 20 50 100 200 500 0 2 Voltage (V) 4 6 8 ContactCurrent(A) 10 12 4 JS-KS SERIES n REFERENCE DATA Distribution of Operate & Release Voltage 100 90 80 JS-12MN-KS n=100 Operate Distribution of Operate Resistance 100 90 80 JS-15MN-KT n=50 Distribution (%) 70 60 50 40 30 20 10 0 0 10 20 30 40 Distribution (%) 70 Release 70 60 50 40 30 20 10 50 60 0 0 Nominal Voltage Multiplying Factor (%) Contact Resistance (m) 2 4 6 8 10 12 14 n DIMENSIONS l Dimensions JS-MN-KS type 29 0.3 10 0.3 1 12.5 +0.3 NO 3 l Schematics (BOTTOM VIEW) COM 5 4 0.4 5 0.4 18.9 0.8 3.3 1 7.62 0.25 ( 2.1) Unit: mm l PC board mounting hole layout (BOTTOM VIEW) 5 (1.19) 18.9 2-O 1.3 (2.1) 7.62 2-O 1.5 5 JS-KS SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder plating currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials above the threshold level that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to through hole electromechanical relays. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 6 JS-KS SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. July 23, 2008. 7 |
Price & Availability of JS-12MN-KS |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |