|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FERROXCUBE DATA SHEET P22/13 P cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube P cores and accessories CORE SETS Effective core parameters SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of set VALUE 0.497 2000 31.5 63.4 50.9 12 UNIT mm-1 mm3 mm mm2 mm2 g 0.5 0.2 0 O 4.4 0.3 0 17.9 0.6 0 3.8 0.6 9.4 handbook, halfpage P22/13 15 0.4 0 22 0.3 0 0.8 0.4 9.2 0 2.7 0.15 13.4 0.2 MGC127 M2 Dimensions in mm. Fig.1 P22/13 core set. Core sets for filter applications Clamping force for AL measurements, 140 30 N. GRADE 3D3 AL (nH) 40 3% 63 3% 100 3% 160 3% 1700 25% 160 3% 250 3% 315 3% 400 3% 630 3% 3 900 25% e 16 25 40 63 670 64 100 125 158 249 1540 TOTAL AIR GAP (m) 3360 1890 1040 570 0 610 360 270 210 120 0 TYPE NUMBER (WITH NUT) P22/13-3D3-E40/N P22/13-3D3-E63/N P22/13-3D3-E100/N P22/13-3D3-E160/N - P22/13-3H3-E160/N P22/13-3H3-E250/N P22/13-3H3-E315/N P22/13-3H3-A400/N P22/13-3H3-A630/N - TYPE NUMBER (WITHOUT NUT) P22/13-3D3-E40 P22/13-3D3-E63 P22/13-3D3-E100 P22/13-3D3-E160 P22/13-3D3 P22/13-3H3-E160 P22/13-3H3-E250 P22/13-3H3-E315 P22/13-3H3-A400 P22/13-3H3-A630 P22/13-3H3 3H3 2008 Sep 01 980 Ferroxcube P cores and accessories Core sets for general purpose transformers and power applications Clamping force for AL measurements, 140 30 N. GRADE 3C81 AL (nH) 160 3% 250 3% 315 3% 400 3% 630 3% 5200 25% 3C91 3F3 5200 25% 160 3% 250 3% 315 3% 400 3% 630 3% 3550 25% e 63 99 125 158 249 2060 2060 63 99 125 158 249 1410 AIR GAP (m) 610 360 280 210 120 0 0 610 360 280 210 120 0 P22/13 TYPE NUMBER P22/13-3C81-A160 P22/13-3C81-A250 P22/13-3C81-A315 P22/13-3C81-A400 P22/13-3C81-A630 P22/13-3C81 P22/13-3C91 P22/13-3F3-A160 P22/13-3F3-A250 P22/13-3F3-A315 P22/13-3F3-A400 P22/13-3F3-A630 P22/13-3F3 Core sets of high permeability grades Clamping force for AL measurements, 140 30 N. GRADE 3E27 AL (nH) 9250 25% e 3660 AIR GAP (m) 0 TYPE NUMBER P22/13-3E27 Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 320 315 315 f = 25 kHz; B = 200 mT; T = 100 C 0.46 - - CORE LOSS (W) at f = 100 kHz; B = 100 mT; T = 100 C - 0.12(1) 0.22 f = 100 kHz; B = 200 mT; T = 100 C - 0.9 (1) - f = 400 kHz; B = 50 mT; T = 100 C - - 0.4 3C81 3C91 3F3 Note 1. Measured at 60 C. 2008 Sep 01 981 Ferroxcube P cores and accessories INDUCTANCE ADJUSTERS General data PARAMETER Material of head and thread Maximum operating temperature SPECIFICATION polypropylene (PP), glass fibre reinforced 125 C 10.4 handbook, halfpage P22/13 O 4.65 0.15 0 3.85 M2 0.8 3.7 min MGC128 Dimensions in mm. Fig.2 P22/13 inductance adjuster. Inductance adjuster selection chart GRADE 3H3 AL (nH) 100 - 160 ADJ-P22/RM8-RED TYPES FOR LOW ADJUSTMENT (applies to all types) L/L (1) TYPES FOR MEDIUM ADJUSTMENT ADJ-P22/RM8-RED ADJ-P22/RM8-ORANGE ADJ-P22/RM8-WHITE - ADJ-P22/RM8-BROWN ADJ-P22/RM8-BLACK ADJ-P22/RM8-BLACK ADJ-P22/RM8-BLACK - - ADJ-P22/RM8-RED ADJ-P22/RM8-ORANGE L/L (1) TYPES FOR HIGH ADJUSTMENT ADJ-P22/RM8-ORANGE ADJ-P22/RM8-WHITE - ADJ-P22/RM8-BROWN ADJ-P22/RM8-BLACK - - - ADJ-P22/RM8-ORANGE ADJ-P22/RM8-ORANGE ADJ-P22/RM8-ORANGE - L/L (1) - 11 10 7 11 10 6 4 - - - 10 16 17 18 - 17 18 12 7 - - 16 15 21 27 - 22 30 - - - 27 26 23 - 250 ADJ-P22/RM8-ORANGE 315 ADJ-P22/RM8-ORANGE 400 ADJ-P22/RM8-WHITE 630 ADJ-P22/RM8-BROWN 1 000 ADJ-P22/RM8-BROWN 1 250 ADJ-P22/RM8-BROWN 3D3 40 - 63 - 100 - 160 ADJ-P22/RM8-RED Note 1. Maximum adjustment range. 2008 Sep 01 982 Ferroxcube P cores and accessories COIL FORMERS General data CP-P22/13 coil former PARAMETER Coil former material Maximum operating temperature SPECIFICATION P22/13 polybutyleneterephtalate (PBT), glass reinforced, flame retardant in accordance with "UL 94V-0" ; UL file number E45329 (R) 155 C, "IEC 60085", class F handbook, full pagewidth 9.0 0.5 0 -0.15 0.4 2.7 10.7 0 17.8 0 -0.15 -0.2 9.6 +0.15 0 CBW603 0.6 0.5 Dimensions in mm. Fig.3 Coil former: CP-P22/13. Winding data and area product for CP-P22/13 coil former NUMBER OF SECTIONS 1 2 3 MINIMUM WINDING AREA (mm2) 26.2 2 x 12.2 3 x 7.6 NOMINAL WINDING WIDTH (mm) 7.5 2 x 3.45 3 x 2.1 AVERAGE LENGTH OF TURN (mm) 44.5 44.5 44.5 AREA PRODUCT Ae x Aw (mm4) 1660 2 x 773 3 x 482 TYPE NUMBER CP-P22/13-1S CP-P22/13-2S CP-P22/13-3S 2008 Sep 01 983 Ferroxcube P cores and accessories General data 6-pins P22/13 coil former for PCB mounting PARAMETER Coil former material Maximum operating temperature Pin material Resistance to soldering heat Solderability SPECIFICATION P22/13 polyamide (PA6.6), glass reinforced, flame retardant in accordance with "UL 94V-0" ; UL file number E41938(M) 130 C, "IEC 60085", class B copper-zinc alloy (CuZn), tin (Sn) plated "IEC 60068-2-20" , Part 2, Test Tb, method 1B, 350 C, 3.5 s "IEC 60068-2-20" , Part 2, Test Ta, method 1, 235 C, 2 s handbook, full pagewidth 7.1 0.75 9 max 7.8 2.25 27.9 17.85 9.5 max max min 25 10.6 2.4 10.4 max 4.35 min 10.4 max MGB624 Dimensions in mm. Fig.4 P22/13 coil former for PCB mounting; 6-pins. Winding data and area product for 6-pins P22/13 coil former for PCB mounting NUMBER OF SECTIONS 1 1 2 2 3 3 Note 1. In accordance with "UL 94-HB" . MINIMUM WINDING AREA (mm2) 25.2 25.2 2 x 11.7 2 x 11.7 3 x 7.03 3 x 7.03 NOMINAL WINDING WIDTH (mm) 7.8 7.8 2 x 3.6 2 x 3.6 3 x 2.2 3 x 2.2 AVERAGE LENGTH OF TURN (mm) 44.5 44.5 44.5 44.5 44.5 44.5 MINIMUM LENGTH OF PINS (mm) 4.4 6.8 4.4 6.8 4.4 6.8 AREA PRODUCT Ae x Aw (mm4) 1600 1600 2 x 742 2 x 742 3 x446 3 x 446 TYPE NUMBER CPV-P22/13-1S-6PD CPV-P22/13-1S-6PDL CPV-P22/13-2S-6PD CPV-P22/13-2S-6PDL CPV-P22/13-3S-6PD(1) CPV-P22/13-3S-6PDL (1) 2008 Sep 01 984 Ferroxcube P cores and accessories MOUNTING PARTS General data and ordering information ITEM Tag plate REMARKS material: phenolformaldehyde (PF), glass reinforced flame retardant: in accordance with "UL 94V-0" ; UL file number E41429 maximum operating temperature: 180 C, "IEC 60085", class H pins: copper-tin alloy (CuSn), tin (Sn) plated resistance to soldering heat in accordance with "IEC 60 068-2-20", Part 2, Test Tb, method 1B: 350 C, 3.5 s solderability in accordance with "IEC 60068-2-20", Part 2, Test Ta, method 1: 235 C, 2 s Container Spring Clamp Washer copper-zinc alloy (CuZn), tin (Sn) plated earth pins: presoldered CrNi-steel spring force: 140 N when mounted spring steel, tin-plated phenolformaldehyde (PF) 8 9 7 6 FIGURE 5 P22/13 TYPE NUMBER TGP-P22/13-C CON-P22/13 SPR-P22/13 CLM/TS-P22/13 WAS-CLM/TS-P22/13 15 10.16 5.08 1.5 2.1 2.54 10.16 5.08 4.5 5.8 0.8 0.15 1.3 0 mark 23.2 max. 6 CBW604 Dimensions in mm. Fig.5 Tag plate: TGP-P22/13-C. 2008 Sep 01 985 Ferroxcube P cores and accessories P22/13 andbook, full pagewidth 10 8.2 mark 0.6 5 8 15.6 max. 1 20.2 min. 23.3 max. CBW424 Dimensions in mm. Fig.6 Container: CON-P22/13. handbook, halfpage 0.3 1.4 0 20.5 max MGC132 Dimensions in mm. Fig.7 Spring: SPR-P22/13. 2008 Sep 01 986 Ferroxcube P cores and accessories P22/13 handbook, halfpage 33 28 8 handbook, halfpage 14 20 3.2 9.5 8.2 22 0.25 13.5 15.1 21 MBG175 MBE672 Dimensions in mm. Dimensions in mm. Fig.8 Clamp: CLM/S-P22/13. Fig.9 Washer: WAS-CLM/TS-P22/13. 2008 Sep 01 987 Ferroxcube P cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS P22/13 This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 988 |
Price & Availability of P22-3H3-E315 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |