 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| P r o du c t B r i e f MicroTCA Power Module Reference Design Features * Complete MicroTCA Power Module Reference Design - System Management by Actel FusionTM MixedSignal FPGA - Compliant to MicroTCA.0 Specification Revision 1.0 - Ready to Plug In for Evaluation and Interoperability Testing - Single-Card Design with Half-Brick DC/DC Converter Demonstrates the Incredible Space Saving of the Fusion-Based Power Module - Includes Hardware Design, HDL, and Software - Includes a Power Module EMMC Interface (IP and software) - Reduced Part Count with More Features and Performance Than MCU-Based Systems - Reference Design Greatly Reduces Time to Market and Development Effort - Includes Support for Power Module Redundancy and In-System Test and Firmware/ Software Upgrades via JTAG/JSM Interface * Less Than 50% of the Cost, Size, and Components of Existing Power Modules Due to Superior Analog and Digital Circuitry of Fusion Devices Supports a Mix of Hardwired and MCU-Based Functionality for Speedy Processing Exceeds MicroTCA Specification for Power Monitoring In-System Reprogrammability Allows Customization and Field Updates Digitally Monitored and Configurable Voltage, Current, and Temperature Thresholds with Hardwired Fail-Safe Circuitry Hot-Swap Compatible Hardware and Software Support by Signal Stream Technologies, Including Custom Boards, Assemblies, and Software * * * * * * Figure 1 * Actel Power Module October 2006 (c) 2006 Actel Corporation 1 See the Actel website for the latest version of the datasheet. MicroTCA The Actel MicroTCA Power Module General Description Actel is enabling the MicroTCA market by providing Fusion-powered reference designs. The Actel Fusion Programmable System Chip (PSC) improves the design of MicroTCA power modules by dramatically reducing part count, board space, system cost, and power while increasing reliability, flexibility, and system availability. The Fusion device includes analog I/O, an analog-todigital converter, FPGA gates, large Flash memory, clocking, and other features that enable it to reduce the part count of the Actel Power Module (PM) reference design by hundreds of parts over other FPGA- and MCUenabled power modules. The analog I/O, digital processing of analog signals, and Flash memory enable improved system monitoring and control so that system reliability and availability increases. As an FPGA, Fusion is the most flexible solution on the market, with in-system reprogrammable microcode and FPGA logic gates. Finally, Fusion improves performance with many functions coprocessed in FPGA gates alongside the Core8051 processor. Actel has reduced the part count required for MicroTCA power module designs in a unique reference design platform that includes hardware, software, and FPGA hardware description language (HDL)--a full solution. Unlike component-driven ASSP designs, the Actel Fusion FPGA enables integration of multiple functions, which include voltage and temperature monitoring, a large Flash memory for event logging, and nonvolatile FPGA fabric for nearly instantaneous hot-swap and power switchover. All of this functionality is delivered today with an Actel Fusion chipset while reducing your bill-ofmaterials cost over ASSP-based power module systems. IPMB-0 to MCH Actel Fusion CoreI2C Standby Management Power Management Power (3.3 V) Core8051 CoreI2C Management Power Monitor PM Communication Interface JTAG/JSM Inteface Hot-Swap Interface and GPIO Payload Power Payload Power Monitor Up to 16 Up to 16 MicroTCA Slot Information CoreUART MP PP Front Panel Figure 2 * Power Module Fusion Device Block Diagram 2 P ro du ct B ri e f MicroTCA The Actel Power Module reference design functions as described in the MicroTCA Specification v1.0, Chapter 4, and provides all of the power subsystem functionality, including the following: * Modular inputs * Fusing * Supply selection * Emissions filtering * Transient suppression and power conversion * Payload and management power monitoring * Power supply to the MicroTCA Carrier Hubs (MCH), AMCs, and cooling unit The power module reference design includes the redundant Intelligent Platform Management Bus (IPMB-0) and the optional JTAG interfaces. The reference design also includes functionally verified hardware, FPGA HDL, and third-party software support. All elements of the design will be thoroughly tested during MicroTCA interoperability testing. For those who want to customize the design, Actel provides the source and can enable a path for turn-key modifications. Signal Stream Technologies has partnered with Actel to offer design services for customizing both hardware and software and will deliver timely engineering support and maintenance services. The Actel Protocol Design Services group can provide modifications to the HDL. For modules in production volume, our partner, MicroBladeTM, Inc., offers complete turn-key power modules to your exact specifications. In summary, you can customize the design yourself or have Actel and its partners perform customization. The power module reference design is delivered as a single-board design for the smallest form factor and superior thermal capabilities. Unlike MCU-based designs, which are software-driven and slow, many functions, such as analog-to-digital conversion sequencing and sampling, over-current and under-voltage power switchover, and hot-swap disable, are hardwired. Hardwired fail-safe logic minimizes response time, if there is an unexpected board extraction or system failure. Since payload power current regulation is fully implemented in hardware, the Actel power module is more accurate than MCU-based designs. The current limit for each output channel can be individually programmed in 256 steps with 1% full-scale accuracy. Likewise, both payload power and management power output voltages are measured with 1% full-scale accuracy. The power module is also more flexible than anything on the market today. A customer can update the FPGA firmware and application software on-the-fly and can customize hardware, firmware, or software. With a total of 1 MByte of on-board Flash memory, software for the on-chip Core8051 microcontroller can be reprogrammed on-the-fly by uploading code to an isolated buffer in the Flash memory, performing verification, and then switching the context to the new software. Unlike an ASSP-based solution, the Actel controller is an FPGA, so even the "hardware" is reprogrammable, either on the bench using standard FPGA programming tools or insystem via the MicroTCA backplane JTAG interface. A customer can also add differentiation to the hardware design, since Actel provides a full set of design documents, including schematics, a bill-of-materials, layout drawings, and manufacturing drawings. A Power Module That Goes Beyond the MicroTCA Standard The Actel MicroTCA power module is a reference module designed specifically to meet the power conversion, power switching, and form factor requirements to enable MicroTCA applications. It supports a dual -48 VDC input and delivers more than 380 W to the MicroTCA backplane. With the revolutionary form factor made available by the Actel Fusion device, power output levels greater than 700 W are easily possible in a single power module. The monitoring and controller hardware supports input power filtering, conditioning, fusing and monitoring, output power control, monitoring and protection, and DC-to-DC conversion for management and payload power. The Intelligent Platform Management Interface (IPMI) software is IPMI v2.0 compatible and will manage the turn-on sequencing for local AMCs, voltage, and current monitoring, handle abnormal power conditions, and respond to commands and requests from an MCH via the IPMB-0 interface. The module works with a single or dual MCH or as a standalone device without an MCH present in the system. It is compatible with the new PICMG(R) MicroTCA.0 revision 1.0 standard. The module can turn on each of the management and payload power lines individually, as specified in the MicroTCA specification. It also monitors temperature and power status and reports this back to the MCH. In the case of no MCH, the microcontroller on the module notices that no MCH is present and can execute an onboard preprogrammed system management application. If an AMC is inserted, the power for that slot is turned on and if a module is extracted, the power for that slot is turned off. System application software can be downloaded to the board using the serial port (RS-232) on the front of the module or by the JTAG interface. The IPMB bus on the power module will also monitor temperature and handle fan speed on the cooling module, when that reference design is available. IPMI Debug and Self-Test This power module allows the user to record and insert IPMI commands into any of the I2C busses in the system. This feature is useful for development, debugging, and testing of a system. 3 P ro du c t B ri ef MicroTCA Technical Specifications General * * * * Single-wide / full-height per AMC.0 revision 1.0 384 W with typical power dissipation under full load of 28.3 W 93% total efficiency Component part count - Less than 400 total parts - 65 stock-keeping units Payload and management brick temperature monitors Inlet air temperature monitor * * * * Management power channel outputs - 25 mV resolution - Over-voltage monitored with configurable threshold - Under-voltage monitored with configurable threshold - Backup trigger threshold voltage configurable - Current limited to greater than 150 mA and less than 225 mA Standby management power output/input - Output current greater than or equal to 350 mA - Input current less than or equal to 225 mA System Management * * * * Single-cycle, 8-bit, Core8051 MCU in an Actel Fusion FPGA Fusion: 1,024 kilobytes of Flash, 216 kbits of RAM Analog monitoring and A/D conversion IPMI v2.0 for power module EMMC Compliance * * * Conforms to PICMG MicroTCA specification v1.0 / IPMI v2.0 (subject to verification) RoHS compliant Designed to meet or exceed (subject to verification testing) - Safety: UL 1950, UL94, CSA 22.2 No. 950, EN 60950, IEC 950 - EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2 Power Inputs * * * * < 415 W -36 to -72 VDC at 15 A maximum Power inputs are transient protected and fused Input voltage is monitored and event messages are generated for alarm conditions Front Panel * * * * * * * AMC latch with hot-swap switch Blue hot-swap indicator LED Green ready indicator LED Red out-of-service indicator LED Green/Amber (LED) indicating IPMI Tx/Rx message traffic USB diagnostic port A and B power input connectors Power Outputs * * * * * 384 W output with a 1/2 brick 800 W output possible with two 1/4 bricks Support for all MicroTCA specified redundancy configuration Supports total payload power output channel on resistance as low as 3.4 m Payload power channel outputs - 50 mV resolution - Over-voltage monitored with configurable threshold - Under-voltage monitored with configurable threshold - Backup trigger threshold voltage configurable - Default current limit 7.6 A - Programmable from 200 mA to 9.7 A in 50 mA increments - Current threshold accuracy 50 mA - Immediate current limit engages in less than 60 s for over-currents greater than 105% of threshold - Warnings for over-currents greater than 100% and less than 105% Environmental * * Environment per PICMG MicroTCA.0 revision 1.0 Operating temperature: - 5C to 40C long-term - -5C to 55C for 96 hours - Storage temperature: -40C to 70C - Operating humidity: 5% to 95% relative humidity (non-condensing and condensing) Miscellaneous * * * Dimensions: 186.7 x 73.2 x 30.5 mm Weight: less than 300 g MTBF: TBD 4 P ro du ct B ri e f MicroTCA IPMI Commands MicroTCA Power Module EMMC IPM Device "Global" Commands Get Device ID Get Self Test Results Broadcast "Get Device ID" AdvancedTCA Get PICMG Properties FRU Control Get FRU LED Properties Get LED Color Capabilities Set FRU LED State Get FRU LED State Set IPMB State Get Device Locator Record ID Set Port State FRU Control Capabilities PEF and Alerting Commands Get PEF Capabilities Arm PEF Postpone Timer Set PEF Configuration Parameters Get PEF Configuration Parameters Set Last Processed Event ID Get Last Processed Event ID AdvancedMC Set AMC Port State Get AMC Port State Sensor Device Commands Get Device SDR Information Get Device SDR Reserve Device SDR Repository Get Sensor Reading MicroTCA Power Channel Control Get Power Channel Status PM Reset Get PM Status PM Heartbeat FRU Device Commands Get FRU Inventory Area Information Read FRU Data Write FRU Data Reference Design Kit Contents * Hardware - Schematic - BOM - Manufacturing files IP platform (FPGA HDL) - Object code: Netlist or obfuscated RTL - Source code: RTL source Application software - Object code: compiled source code - Source code: in C language SDR Device Commands Get SDR Repository Information Reserve SDR Repository Get SDR Add SDR Partial Add SDR Clear SDR Repository Get SDR Repository Time Set SDR Repository Time Exit SDR Repository Update Mode * * Ordering Information Table 1 * Ordering Codes Description Part Number SEL Device Commands Get SEL Information Get SEL Entry Add SEL Entry Partial Add SEL Entry Clear SEL Get SEL Time Set SEL Time MicroTCA Power Module Reference Design UTCA-PM-RD-O uTCA-PM-RD-S With object code With source code MicroTCA Power Module uTCA-PM-SA Standalone power module P ro du c t B ri ef 5 MicroTCA Datasheet Categories In order to provide the latest information to designers, some datasheets are published before data has been fully characterized. Datasheets are designated as "Product Brief," "Advanced," and "Production." The definitions of these categories are as follows: Product Brief The product brief is a summarized version of an advanced or production datasheet containing general product information. This brief summarizes specific device and family information for unreleased products. Advanced This datasheet version contains initial estimated information based on simulation, other products, devices, or speed grades. This information can be used as estimates, but not for production. Unmarked (production) This datasheet version contains information that is considered to be final. 6 P ro du ct B ri e f Actel and the Actel logo are registered trademarks of Actel Corporation. All other trademarks are the property of their owners. www.actel.com Actel Corporation 2061 Stierlin Court Mountain View, CA 94043-4655 USA Phone 650.318.4200 Fax 650.318.4600 Actel Europe Ltd. River Court, Meadows Business Park Station Approach, Blackwater Camberley, Surrey GU17 9AB United Kingdom Phone +44 (0) 1276 609 300 Fax +44 (0) 1276 607 540 Actel Japan EXOS Ebisu Bldg. 4F 1-24-14 Ebisu Shibuya-ku Tokyo 150 Japan Phone +81.03.3445.7671 Fax +81.03.3445.7668 www.jp.actel.com Actel Hong Kong Suite 2114, Two Pacific Place 88 Queensway, Admiralty Hong Kong Phone +852 2185 6460 Fax +852 2185 6488 www.actel.com.cn 51700084-0/10.06 |
Price & Availability of UTCA-PM-RD-O
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |