 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| R2E-S Latching SMD Reed Sensor SMD Package, Form E, Latching Molded with internal blades parallel to SMD feet All dimensions in mm Does not require power for operation Bi-stable, form E contact remembers state Polarity sensitive Molded with internal blades parallel to SMD feet Packed in tape and reels conforming to IEC-60286-3 norms Lead (Pb) free and RoHS compliant Applications This reed sensor is suitable for use in the following applications and many others: floor detection for elevators, lifts and hoists, level sensors... Specification Contact Form Contact Rating (max) Switching Current (max) Carry Current (max) Switching Voltage (max) Breakdown Voltage (min) Initial Contact Resistance (max) Operating Temperature Shock Resistance (1/2Sin wave for 11ms) Vibration Resistance (10-2000Hz) Ordering Code R2E-S-(Operate AT Code) OAT Code 1 W / VA A A VDC VDC m C g g E 10 0.5 1.0 100 150 150 -20 to +100 30 20 10 - 15 Please contact us for re-closure values Example R2E-S-1 denotes 10-15 operate and release AT. Due to continual improvement, specifications are subject to change without notice www.reed-sensor.com 25 December 2006 Reed Relays and Electronics India Limited info@reed-switch.com Tel 91-44-6528-4022 R2E-S Latching SMD Reed Sensor Actuation Distances Actuation distances (latch and un-latch) for the R2E-S bi-stable SMD reed sensor when actuated (as shown in the sketch) with NdFeB standard magnets is shown below. All distances given are in mm with tolerances of 0.5mm. Although some of the AT band / magnet combinations will produce similar actuating distances, selecting the right AT band and magnet for an application is important and can be done by going through our AT band FAQ and our magnet selection guide. R2E-S-1 (10-15 AT) Actuation Sketch Magnet NDR-T NDC-T NDR-S NDC-S NDR-M NDC-M NDR-L NDC-L Dimensions 4.0 x 1.5 x 1.5 O2.0 x 4.0 6.0 x 2.5 x 2.5 O3.0 x 7.0 8.0 x 3.0 x 3.0 O4.0 x 10.0 19.0 x 4.0 x 4.0 O8.0 x 15.0 Latch/Un-Latch Distance 7.0 - 9.0 8.0 - 10.0 13.0 - 16.0 15.0 - 19.0 18.0 - 21.0 22.0 - 26.0 30.0 - 37.0 43.0 - 51.0 Due to continual improvement, specifications are subject to change without notice www.reed-sensor.com 31 July 2008 Reed Relays and Electronics India Limited info@reed-switch.com Tel 91-44-6528-4022 |
Price & Availability of R2E-S-1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |