View RQ-85_4777903.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

85W Quad Output Switching Power Supply
Features :
Universal AC input / Full range
RQ-85
series
Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105
long life electrolytic capacitors
Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty
SPECIFICATION
MODEL OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT RQ-85B CH1 5V 7A
Note.6 2 ~ 10A Note.6 80.7W
RQ-85C CH2 12V 3.1A 0.3 ~ 4A CH3 -5V 0.5A 0 ~ 1A CH4 -12V 0.5A 0 ~ 1A CH1 5V 7A 2 ~ 10A 82.5W CH1: 4.75 ~ 5.5V 2.0% +3,-7% 0.5% 1.0% 1.0% 3.0% CH2 15V 2.5A 0.3 ~ 4A CH3 -5V 0.5A 0 ~ 1A CH4 -15V 0.5A 0 ~ 1A
RQ-85D CH1 5V 6A 2 ~ 10A 84W CH1: 4.75 ~ 5.5V 2.0% +7,-3% 0.5% 1.0% 1.0% 3.0% CH2 12V 2A 0.3 ~ 4A CH3 24V 1A CH4 -12V 0.5A
0.1 ~ 1.5A 0 ~ 1A
RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 100mVp-p 80mVp-p 80mVp-p 120mVp-p 100mVp-p 80mVp-p 80mVp-p 120mVp-p 150mVp-p 80mVp-p VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% +7,-3% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD
Note.4 Note.5
8.0% 1.0% 6.0%
5.0% 1.0% 2.0%
8.0% 1.0% 6.0%
5.0% 1.0% 2.0%
8.0% 1.0% 5.0%
5.0% 1.0% 2.0%
0.5% 1.0%
1.0% 3.0%
500ms, 20ms/230VAC 100ms/230VAC 88 ~ 264VAC 47 ~ 63Hz 76%
1200ms, 30ms/115VAC at full load
18ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 77% 78%
INPUT
2.5A/115VAC 1.5A/230VAC COLD START 40A/230VAC <2mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 )on +5V output 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE
SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
(Note 7)
HARMONIC CURRENT EMS IMMUNITY MTBF
Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A 206.8Khrs min. MIL-HDBK-217F (25 159*97*38mm (L*W*H) 0.6Kg; 24pcs/15.4Kg/0.7CUFT )
OTHERS
DIMENSION PACKING
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can't exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
File Name:RQ-85-SPEC 2006-05-19
85W Quad Output Switching Power Supply
Mechanical Specification
RQ-85
Case No. 901
series
Unit:mm
4.5
152.5
1
8.25
2
4
65
3
3.5 84.5
2 -M 3
78 159 150
6 7 8
7
3 .5
4.5 24
6.5
9
18.5
9
22
117
Terminal Pin. No Assignment
Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. 4 5 6 Assignment DC OUTPUT -V4 DC OUTPUT V3 DC OUTPUT +V2 Pin No. 7 8 Assignment DC OUTPUT COM DC OUTPUT +V1
Derating Curve
Static Characteristics
Ta=25
100
100 90
80
80 70
60
LOAD (%)
LOAD (%)
40
60 50 40
20
-25 -25
0 0
10
20
30
40
50
60
70 (VERTICAL)
88
95
100
115
120
140
160
28.5
180
M3
18
38
200 220
3-
3.5
97
5
7
3 .5
240
264
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (VAC) 60Hz
File Name:RQ-85-SPEC 2006-05-19

▲Up To Search▲

Price & Availability of RQ-85

	To Download RQ-85 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .