View PO023OX1_4749409.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ver sion2.0
PO023OX1
TECHNICAL SPECIFICATION MODEL
The content of this Please contact PVI or its
NO. : PO023OX 1
t notice.
information is subject to be changed withou agent for further information
Cus tomer s Confirmation
Cus tome r
Date
By
FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com
PVI s Confirmation
Confirmed By
Prepared By
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1
PO023OX1 Revision History
Rev. 1.0 2.0 Issued Date Engineer Revised Contents Apr. 01, 2008 New Aug. 21, 2009 Depend on ECN200907022 to modify packing drawing
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2
PO023OX1
TECHNICAL SPECIFICATION
CONTENTS
NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
ITEM
Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Block Diagram Timing specification Interface specification Optical Characteristics Handling Caution Reliability Test Packing
PAGE
1 2 3 4 4 4 5 6 7 8 9 9 10 12 14 17 19 20
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3
PO023OX1
1. Application
The PO023OX1 applies to a color TFT LCD module which has octagonal outline. PO023OX1 module applies to OA product, GPS, which require high quality flat panel display. If you must use in high reliability environment can' t over reliability test condition.
2. Features
. . . . . . Pixel in stripe configuration Slim and compact Wide viewing angle High Brightness Octagonal LCD Driver ICHX8325
3. Mechanical Specifications
Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Surface treatment Back Light Display mode Gray scale inversion direction Specifications 2.3" TFT LCD 240x(R, G, B)x240 65,536 D = 57.96 (Circular) 0.2415x0.2415 Stripe 75.60(W)x75.70(H)x7.64(D) 465 Anti-glare and wide-view film 2-LED,150mA Normally white 6 [Refer to Note 12-1] Unit inch dot mm mm mm g
o' clock
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4
PO023OX1
4. Mechanical Drawing of TFT-LCD Module
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5
PO023OX1
5. Input / Output Terminals
LCD Module Connector FPC Down Connect, 30 Pins Pin No. Signal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 VSS VSS NRESET Dummy D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 Dummy
NRD_E
NWR_RNW
Pin Function Ground Ground Reset Input Pin N.C. Parallel Data Bus (R4) Parallel Data Bus (R3) Parallel Data Bus (R2) Parallel Data Bus (R1) Parallel Data Bus (R0) Parallel Data Bus (G5) Parallel Data Bus (G4) Parallel Data Bus (G3) Parallel Data Bus (G2) Parallel Data Bus (G1) Parallel Data Bus (G0) Parallel Data Bus (B4) Parallel Data Bus (B3) Parallel Data Bus (B2) Parallel Data Bus (B1) Parallel Data Bus (B0) N.C. Read Signal Pin Write Signal Pin Chip Select Pin N.C. Power Supply (Typ. 3.0V) Power Supply (Typ. 3.0V) Ground Ground
Remark
DNC_SCL Register Index or Register Command Select
NCS Dummy VCI VCI VSS VSS
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6
PO023OX1
6. Absolute Maximum Ratings
The followings are maximum values, which if exceeded, may cause faulty operation or damage to the unit. VSS=GND=0V , Ta = 25 Value Unit Remark Note 6-1 -0.3 to +4.6 V Note 6-2 Note 6-1 -0.3 to +4.6 V Note 6-3 Note 6-1 -0.3 to +6.5 V Note 6-4 Note 6-1 -0.3 to +4.6 V Note 6-5 Note 6-1 32 V Note 6-6 -0.3 to IOVCC+0.3 V Note 6-1 -0.3 to IOVCC+0.3 V Note 6-1
Item Power supply voltage (1) Power supply voltage (2) Power supply voltage (3) Power supply voltage (4) Drive Supply Voltage Input Voltage Range Output Voltage Range Note Note Note Note Note Note
Symbol VCC, IOVCC VCI VLCD-VSSA VSSA-VCL VGH-VGL VIN VO
6-1VCC,VSSD must be maintained, VSSD=VSSA=0V 6-2Make sure VCCVSSD, IOVCCVSSD 6-3Make sure VCIVSSA 6-4Make sure VLCDVSSA 6-5Make sure VSSAVCL 6-6Make sure VGHVSSA and VSSAVGL
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7
PO023OX1
7. Electrical Characteristics
7-1 Operation condition Item Power supply voltage (1) Power supply voltage (2) Power supply voltage (3) Power supply voltage (4) Power supply voltage (5) Power supply voltage (6) TFT Common Electrode Voltage Coupling voltage Black of Video Low Voltage Black of Video High Voltage White of Video Low Voltage White of Video High Voltage Symbol VCI-VSS VLCD-VSS VSS-VCL VLCD-VCL VGH-VSS VSS-VGL VCOMH VCOML Vp VLB VHB VLW VHW VSS=GND=0V , Ta = 25 Value Unit Remark V Note 7-1 30.2 4.63 2.67 7.3 13.7 10.21 3. 6 -0.71 0.82 0.24 4.24 0.2 V V V V V V V V V V V Note 7-3 Note 7-2
V 4.18 Note 7-1The VCI 30.2V is base on item 11-2 setting, if out of range, will be have some display abnormal Note 7-2VCOM must be adjusted optimize display quality, crosstalk, contrast ration and etc. Note 7-3
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8
PO023OX1
7-2 Power consumption Parameter Symbol Min Supply voltage of LED backlight VLED Supply current of LED backlight ILED Backlight Power Consumption PLED Note 7-4The ILED=150 mA (Constant current) Note 7-5LED B/L applied information Note 7-6PLED = VLED* ILED TYP 150 Unit V (7.6) mA 1140 mW MAX Remark Note 7-4 Note 7-5 Note 7-6
Parameter Supply current for source driver and gate driver Backlight Power Consumption Total power consumption
Symbol ICI PLED -
Conditions VCI 3.0V -
TYP. 11.7 -
MAX. 17.6 1140
Unit Remark mA mW
1192.8 mW
8. Pixel Arrangement
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9
PO023OX1
9. Block Diagram
D15~D0
16
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10
PO023OX1
10. Timing specification
10-1. 80-system Bus Operation
10-2. AC Characteristics 10-2.1 80-system Bus Interface Timing Characteristics Table.10-2.1 80-System Normal Write Mode (HWM =0)/ (VCI=3V)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11
PO023OX1
11. Interface specification
11-1. 16-bit bus interface The 80-system 16-bit bus parallel data transfer can be used by setting M3-0 pins to " 0010" .
Figure.11-1-2 A Example of 80-System 16-bit Interface
Figure.11-1-2 B Data Format of 16-bit bus System Interface
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12
PO023OX1
11-2. Display on Flow
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13
PO023OX1
12. Optical Characteristics
Ta=25 Parameter Viewing Angle Symbol Condition CR 10 At optimized view angle =0 =0 =0 =0 +25 MIN. 70 45 65 200 TYP. 75 50 70 400 MAX. Unit deg deg deg Rem arks Note 12-1 Note 12-2 Note 12-4 Note 12-5 Note 12-3
Horizontal 1112 22 Vertical 21 CR
Contrast Ratio
Brightness Uniformity Response time Rise Fall
L U% Tr Tf x y -
800 70 0.29 0.31
1000 75 15 20 0.33 0.35 20 30 0.37 0.39 -
cd/ % ms ms hrs
White Chromaticity LED Life Time
20000 30000
Note 12-6
Note 12-1: The definitions of viewing angles are as follow
12
22
21
11
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14
PO023OX1
Note 12-2: The definition of contrast ratio CR =
Luminance at White Pattern Luminance at Black Pattern
Note 12-3: Definition of Response Time Tr and Tf
W hite 100% 90% Brightness 10% 0% Tr Tf Black W hite
Note 12-4: All optical measurements shall be performed after backlight being turned-on for 30 mins. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15
500 mm +/- 50 mm
Field = 1 TFT-LCD
Optical characteristics measuring configuration
PO023OX1
Note 12-5The uniformity of LCD is defined as U = The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meterBM-5A or BM-7 fast (TOPCON) Measurement distance500 mm +/- 50 mm Ambient illumination< 1 Lux Measuring directionPerpendicular to the surface of module The test pattern is white.
Note 12-6 The " LED Life time " is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25 and ILED = 150mA.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16
PO023OX1
13. Handling Cautions
13-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. d) Please following the tear off direction as figure 13-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 13-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 13-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 13-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. As open the packing, must assembly within 3 month c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. 13-4) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17
PO023OX1
Figure 13-1 the way to peel off protective film
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18
PO023OX1
14. Reliability Test
No 1 2 4 5 6 Test Item Test Condition Remark
High Temperature Storage Test Low Temperature Storage Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) Vibration Test (non-operating)
Ta = 85, 240 hrs Ta = -40, 240 hrs Ta = 80, 240 hrs Ta = -30, 240 hrs Ta = 60, 95%RH, 240 hrs (No Condensation) -30 +80, 200 Cycles 30 mins 30 mins Frequency : 10 ~ 55 HZ Amplitude : 1 mm Sweep time : 11 mins Test Period : 6 Cycles for each direction of X, Y, Z 100G , 6ms Direction : X , Y , Z Cycle : 3 times 200pF , 0 200V 1 time / each terminal
3 High Temperature Operation Test
7
8
Shock Test (non-operating) Electrostatic Discharge Test (non-operating)
9
Taambient temperature [Criteria] In the standard conditions, there is not display function NG issue occurred. (includingline defect ,no image)All the cosmetic specification is judged before the reliability stress.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19
PO023OX1
15. Packing
450*380*700mm

180
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20

▲Up To Search▲

Price & Availability of PO023OX1

	To Download PO023OX1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .