|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Integrated Telecom Circuits IAA110P Parameter Blocking Voltage Load Current Max On-resistance Rating 350 100 35 Units VP mA Features * * * * * * * * * Three Functions in One Package Small 16 Pin SOIC Package (PCMCIA Compatible) Bidirectional Current Sensing Bidirectional Current Switching 3750Vrms Input/Output Isolation FCC Compatible No EMI/RFI Generation Machine Insertable, Wave Solderable Tape & Reel Version Available Description The IAA110P Multifunction Telecom switch combines two 350V Form A relays and one optocoupler in a single package. The relay uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture. The optically coupled input uses highly efficient GaAIAs infrared LEDs. The IAA110P allows telecom circuit designers to combine three discrete functions in a single component. The IAA110P's small package uses less space than traditional discrete component solutions. Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-12 IAA110P Pinout * VDE Compatible 1 * EN/IEC 60950-1 compliant (N/C) 2 Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls 16 15 (Form A) 14 13 12 (Form A) 11 10 9 Ordering Information Part # IAA110P IAA110PTR 3 4 Description 5 16 Pin SOIC (50/Tube) 16 Pin SOIC (1000/Reel) 6 7 Pin Configuration IAA110P Pinout (N/C) 1 2 3 4 5 6 7 (N/C) 16 15 (Form A) 14 13 12 (Form A) 11 10 9 8 (N/C) 8 1. (N/C) 2. + LED - Form A Relay #1 3. - LED - Form A Relay #1 4. + LED - Form A Relay #2 5. - LED - Form A Relay #2 6. Emitter - Phototransistor 7. Collector - Phototransistor 8. (N/C) 9. LED - Phototransistor +/- 10. LED - Phototransistor -/+ 11. Output - Form A Relay #2 12. Common Source Relay #2 13. Output - Form A Relay #2 14. Output - Form A Relay #1 15. Common Source Relay #1 16. Output - Form A Relay #1 2002/95/EC RoHS e3 1. (N/C) 2. + LED - Form A Relay #1 3. - LED - Form A Relay #1 Switching Characteristics 4. + LED - Form A Relay #2 of Normally Open (Form A) 5. - LED - Form A Relay #2 Devices 6. Emitter - Phototransistor 7. Collector - Phototransistor 8. (N/C) 9. LED - Phototransistor +/- CONTROL 10. LED - Phototransistor -/+ 11. Output - Form A Relay #2 12. Common Source Relay #2 + 90% ILOAD 13. Output - Form A Relay #2 10% + 10%+ 14. Output - Form A Relay #1 TOFF 15. Common Source Relay #1 TON 16. Output - Form A Relay #1 DS-IAA110P-R03 www.clare.com 1 IAA110P Absolute Maximum Ratings (@ 25 C) Parameter Total Package Dissipation 1 Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 Min 3750 -40 -40 Typ Max Units 1 W Vrms +85 C +125 C Above 25C derate linerity 1.67mw/C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and affect its reliability. Electrical Characteristics Parameter Conditions Relay Portion Output Characteristics @ 25C Blocking Voltage (Peak) IL= 1A Load Current (Continuous) Peak Load Current 10ms On-Resistance IL=100mA Off-State Leakage Current VL=350V; TJ=25C Switching Speeds Turn-On IF=5mA, VL =10V Turn-Off IF=5mA, VL=10V Output Capacitance VL=50V, f=1MHz Relay Portion Input Characteristics @ 25C Input Control Current IL=100mA Input Dropout Current IL=1mA Input Voltage Drop IF=5mA Reverse Input Voltage Reverse Input Current VR=5V Detector Portion Output Characteristics @ 25C Phototransistor Blocking Voltage IC =10A Phototransistor Dark Current VCE=5V, IF =0mA Saturation Voltage IC=2mA, IF=16mA Current Transfer Ratio IF=6mA, VCE=0.5V Detector Portion Input Characteristics @ 25C Input Control Current IC=2mA,VCE=0.5V Input Voltage Drop IF=5mA Input Current IC=1A, VCE=5V (Detector must be off) Input to Output Capacitance VL=50V, f=1MHz Input to Output Isolation Symbol Min Typ Max Units VL IL ILPK RON ILEAK TON TOFF - - 25 350 100 350 35 1 3 3 - V mA mA A ms ms pF IF IF VF VR IR 5 0.4 0.9 - 1.2 - 50 1.4 5 10 mA mA V V A BVCEO ICEO VSAT CTR 20 33 50 50 0.3 - 500 0.5 - V nA V % IF ICEO CI/O VI/O 6 0.9 5 3750 2 1.2 25 3 - 1.4 - mA V A pF Vrms 2 www.clare.com R03 IAA110P PERFORMANCE DATA* IAA110P Typical LED Forward Voltage Drop (N = 50, TA = 25C, IF = 5mA) IAA110P Typical On-Resistance Distribution (N = 50, TA = 25C, IL = 100mADC, IF = 5mA) IAA110P Typical Blocking Voltage Distribution (N = 50, TA = 25C) 35 30 Device Count (N) 35 30 Device Count (N) 25 20 15 10 5 35 30 Device Count (N) 25 20 15 10 5 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 0 18.75 19.85 20.95 22.05 23.15 24.25 25.35 On-Resistance () 0 LED Forward Voltage Drop (V) 377.5 388.5 399.5 410.5 421.5 432.5 443.5 Blocking Voltage (VP) 25 20 15 10 5 0 IAA110P Typical IF for Switch Operation (N = 50, TA = 25C, IL = 100mADC) 25 20 15 10 5 0 IAA110P Typical IF for Switch Dropout (N = 50, TA = 25C, IL = 100mADC) 25 20 15 10 5 0 IAA110P Typical Turn-On Time (N = 50, TA = 25C, IL = 100mADC, IF = 5mA) Device Count (N) Device Count (N) 0.39 0.65 0.91 1.17 1.43 1.69 1.95 0.39 0.65 0.91 1.17 1.43 1.69 1.95 Device Count (N) 0.3 0.9 1.5 2.1 2.7 3.3 3.9 LED Current (mA) LED Current (mA) Turn-On (ms) 25 20 15 10 5 0 IAA110P Typical Turn-Off Time (N = 50, TA = 25C, IL = 100mADC, I F = 5mA) Load Current (mA) 180 160 140 120 100 80 60 40 20 0 IAA110P Typical Load Current vs. Temperature IAA110P Typical Leakage vs. Temperature (Measured across Pins 14 & 16 or 11 & 13) 0.016 0.014 Leakage (A) 0.012 0.010 0.008 0.006 0.004 0.002 0 -40 Device Count (N) IF=20mA IF=10mA IF=5mA 0.05 0.15 0.25 0.35 0.45 0.55 0.65 -40 -20 0 Turn-Off (ms) 20 40 60 80 Temperature (C) 100 120 -20 0 20 40 60 80 100 Temperature (C) 430 Blocking Voltage (VP) 425 IAA110P Typical Blocking Voltage vs. Temperature 415 410 405 400 395 -40 -20 0 20 40 60 Temperature (C) 80 100 IF=5mA IF=10mA IF=20mA -40 -20 0 20 40 60 80 100 Temperature (C) Turn-Off (ms) Turn-On (ms) 420 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 IAA110P Typical Turn-On vs. Temperature (IL = 100mADC) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 IAA110P Typical Turn-Off vs. Temperature (IL = 100mADC) IF=5mA -40 -20 0 20 40 60 80 100 Temperature (C) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 IAA110P PERFORMANCE DATA* IAA110P Typical LED Forward Voltage Drop vs. Temperature IAA110P Typical Turn-On vs. LED Forward Current (IL = 100mADC) IAA110P Typical Turn-Off vs. LED Forward Current (IL = 100mADC) LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA -40 -20 0 20 40 60 80 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0.7 0.6 Turn-Off (ms) 0.5 0.4 0.3 0.2 0.1 Turn-On (ms) 0 5 10 15 20 25 30 35 40 45 50 0 0 5 10 15 20 25 30 35 40 45 50 Temperature (C) LED Forward Current (mA) LED Forward Current (mA) 60 On-Resistance () 50 40 30 20 10 0 IAA110P Typical On-Resistance vs. Temperature (IL = 100mADC, I F = 5mA) IAA110P IAA110P Typical IF for Switch Operation vs. Temperature Typical IF for Switch Dropout vs. Temperature (IL = 100mADC) (IL = 100mADC) 3.0 2.5 LED Current (mA) 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 LED Current (mA) 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) Temperature (C) 100 80 60 40 20 0 -20 -40 -60 -80 -100 -2.5 -2 -1.5 -1 -0.5 0 IAA110P Typical Load Current vs. Load Voltage (TA = 25C, I F = 5mA) 0.5 1 1.5 2 2.5 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 IAA110P Energy Rating Curve Normalized CTR (%) IAA110P Typical Normalized CTR vs. Forward Current (VCE = 0.5V) 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 Load Current (mA) Load Current (A) 10s 100s 1ms 10ms 100ms Time 1s 10s 100s 0 2 4 6 8 10 12 14 16 18 20 Load Voltage (V) IF (mA) 8 Normalized CTR (%) 7 6 5 4 3 2 1 0 IAA110P Typical Normalized CTR vs. Temperature (VCE = 0.5V) IAA110P Typical Collector Current vs. Forward Current (VCE = 0.5V) 12 10 8 IC (mA) 6 4 2 0 0 2 4 6 8 10 12 IF (mA) 14 16 18 20 IF=1mA IF=2mA IF=5mA IF=10mA IF=15mA IF=20mA -40 -20 0 20 40 60 80 100 120 Temperature (C) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 IAA110P MANUFACTURING INFORMATION Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. 2002/95/EC RoHS e3 MECHANICAL DIMENSIONS 16-Pin SOIC ("P" Suffix) 10.160 0.381 (0.400 0.015) 1.270 TYP. (0.050 TYP.) PC Board Pattern (Top View) 1.270 (0.050) 2.108 MAX. (0.083 MAX.) 1.016 TYP. (0.040 TYP.) 7.493 (0.295 0.254 (0.010 0.0127 0.0005) 0.127 0.005) 10.363 0.127 (0.408 0.005) 9.728 0.051 (0.383 0.002) 0.406 TYP. (0.016) TYP. 8.890 TYP. (0.350 TYP.) 1.193 (0.047) 0.787 (0.031) Tape and Reel Packaging for 16-Pin SOIC Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 16 16.30 MAX. (0.642 MAX.) 10.70 (0.421) Top Cover Tape Embossed Carrier 4.90 (0.193) Embossment 12.00 (0.472) User Direction of Feed 10.90 (0.430) Dimensions mm (inches) 2.70 (0.106) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-IAA110P-R03 (c)Copyright 2006, Clare, Inc. All rights reserved. Printed in USA. 12/21/06 5 |
Price & Availability of IAA110P1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |