|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Subminiature Slides Series AS Distinctive Characteristics Subminiature size (1/3 size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Available in various actuator lengths. Antistatic superstructure of carbon blended polyacetal prevents static discharge to the contacts. Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants. .100" x .100" (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Matching indicators available and shown at the end of Section M. Actual Size NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Subminiature Slides Series AS General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel: 50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 50,000 operations minimum 50,000 operations minimum 2.55N Nonshorting (break-before-make) Pretravel: .082" (2.1mm); Overtravel: .016" (0.4mm); Total Travel: .098" (2.5mm) Materials & Finishes Actuator: Upper Case Housing: Lower Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Glass fiber reinforced polyamide Carbon blended polyacetal (antistatic) Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Brass with gold plating Brass with gold plating Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: -30C through +85C (-22F through +185F) 90 ~ 95% humidity for 192 hours @ 40C (104F) 10 ~ 60Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for 30 minutes 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Cleaning: Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: for single pole see Profile B in Supplement section; for double pole see Profile A. These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications UL Recognition or CSA Certification: The A Series slides have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Subminiature Slides TYPICAL SWITCH ORDERING EXAMPLE Series AS H AS POLES 1 2 SPST SPDT DPDT SP3T 1 2 3 4 2 CIRCUITS ON ON ON ON NONE NONE OFF ON OFF ON ON ON A B C 2 ACTUATORS A PC TERMINALS P *B *H *V Straight Straight with Bracket Right Angle with Bracket Vertical with Bracket * Bracketed models are ESD protected .098" (2.5mm) Long Flush .150" (3.8mm) Long DESCRIPTION FOR TYPICAL ORDERING EXAMPLE AS22AH DPDT ON-NONE-ON Circuit .098" (2.5mm) Long Actuator Right Angle PC Terminals POLES & CIRCUITS Slide Position Left Pole SP SP Model AS11 AS12 AS13 AS22 AS23 ON ON ON ON ON NONE NONE OFF NONE OFF OFF ON ON ON ON 3-1 2-1 2-1 2-1 5-4 2-1 5-4 OPEN OPEN OPEN OPEN OPEN OPEN 2-3 2-3 2-3 5-6 2-3 5-6 Center Right Left Connected Terminals Center Right Throw & Schematics Note: Terminal numbers are not actually on the switch. SPST SPDT 1 2 1 (COM) 3 4 INTERNAL CONNECTION 1 3 2 (COM) 3 5 6 DP DPDT For 3 Throw (3-On) Connected Terminals & Schematics Pole Model Left ON External Connection 5 2 (in) External Connection Right ON External Connection 5 2 (in) Center ON External Connection 5 2 (in) The SP3T model utilizes a double pole base. External connections must be made during field installation. (out) Common (in) 1 2 3 4 5 6 (out) SP AS24 1 (out) 3 4 (out) 6 (out) 1 (out) 3 4 (out) 6 (out) 1 (out) 3 4 (out) 6 (out) External Conn (out) 2-1 5-4 2-3 5-4 2-3 5-6 NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Subminiature Slides ACTUATORS A .098" (2.5mm) Long (2.5) .098 Series AS (3.8) .150 B (2.4) .094 Flush (2.4) .094 (2.4) .094 C .150" (3.8mm) Long (2.4) .094 (2.4) .094 (2.4) .094 Actuator Color: Gray standard; contact factory for other colors. PC TERMINALS P Straight (2.54) Typ .100 (0.6) Dia Typ .024 B Straight with Bracket (5.08) .200 (5.08) .200 (0.3) Typ .012 H (10.16) .400 (2.54) Typ .100 (0.6) Dia Typ .024 (0.7) Typ .028 Right Angle with Bracket (2.54) Typ .100 (2.54) Typ .100 (0.6) Dia Typ .024 V Vertical with Bracket (5.08) .200 (0.6) Dia Typ .024 (0.5) Typ .020 (5.08) Typ .200 (0.8) .031 (5.08) .200 (0.3) .012 (0.7) .028 (0.5) .020 (8.8) .346 (9.0) .354 (2.54) Typ .100 (5.08) .200 (0.3) .012 (0.7) .028 (9.0) .354 (8.8) .346 (9.0) .354 (8.8) .346 (9.0) .354 (8.8) .346 Use of a support bracket is recommended to increase PCB mounting strength and stability. TYPICAL SWITCH DIMENSIONS Straight PC (2.4) Sq .094 (0.4) Typ .016 (2.06) .081 Single Pole P/N This Side (0.6) Dia Typ .024 1 2 3 1 (1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031 (9.8) .386 (1.0) .039 C L 2 3 (0.3) .012 (5.38) .212 (2.5) Travel .098 (2.5) .098 (0.8) .031 (9.1) .358 (2.54) Typ .100 (3.1) .122 C L AS12AP Actuator shown in LEFT position Single throw models do not have terminal 2. Straight PC (2.4) Sq .094 (0.4) Typ .016 (2.06) .081 Double Pole P/N This Side (0.6) Dia Typ .024 1 2 3 4 5 6 4 1 2 3 (5.08) .200 (9.8) .386 5 6 (0.4) .016 (9.2) .362 (2.5) Travel .098 (2.5) .098 (0.8) .031 (9.1) .358 (2.54) Typ .100 (3.1) .122 (2.54) Typ .100 (0.8) Dia Typ .031 (5.08) .200 AS22AP Actuator shown in LEFT position Straight PC * Bracket (2.4) Sq .094 (2.06) .081 Single Pole P/N This Side (0.3) Typ .012 (0.6) Dia Typ .024 (10.16) .400 (0.3) .012 (2.5) Travel .098 (2.5) .098 (0.8) .031 (9.1) .358 (2.54) Typ .100 C L 1 2 3 (0.7) Typ .028 1 (1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) .100 (9.8) .386 (1.0) .039 (2.54) .100 2 3 (5.7) .224 (3.1) .122 C L AS12AB Actuator shown in LEFT position NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Subminiature Slides TYPICAL SWITCH DIMENSIONS Straight PC * Bracket (2.4) Sq .094 (2.06) .081 Series AS Double Pole P/N This Side (0.3) Typ .012 (0.6) Dia Typ .024 (10.16) .400 (0.4) .016 (9.5) .374 (2.5) Travel .098 (2.5) .098 (0.8) .031 (9.1) .358 (2.54) Typ .100 (3.1) .122 1 2 3 4 5 6 4 1 2 3 (5.08) .200 (9.8) .386 (0.7) Typ .028 (5.08) .200 5 6 (2.54) Typ .100 (0.8) Dia Typ .031 AS22AB Actuator shown in LEFT position Right Angle PC (2.5) Travel .098 (2.06) .081 (2.4) Sq .094 (0.3) .012 (0.3) Typ .012 (5.08) .200 (0.7) .028 (9.8) .386 (2.5) .098 Single Pole P/N This Side (0.8) .031 (3.3) .131 3 2 1 (6.18) .243 1 2 3 (2.54) Typ .100 (5.08) .200 (9.9) .389 (3.1) .122 (5.08) .200 (0.6) Dia Typ .024 (2.54) Typ .100 (0.8) Dia Typ .031 AS12AH Actuator shown in LEFT position (2.5) Travel .098 (2.06) .081 Right Angle PC (2.4) Sq .094 (0.4) .016 Double Pole P/N This Side (0.8) .031 3 2 5 1 4 (5.2) .205 (0.7) .028 (2.54) .100 (5.08) .200 (3.1) .122 (0.5) .020 6 (10.0) .394 1 4 2 5 (2.54) Typ .100 (2.54) 3 .100 6 (5.08) .200 (0.6) Dia Typ .024 (2.54) Typ .100 (0.8) Dia Typ .031 (0.3) Typ .012 (5.08) .200 (9.8) .386 (2.5) .098 (12.4) .489 AS22AH Actuator shown in LEFT position Vertical PC (2.4) Sq .094 (0.4) .016 (2.06) .081 Single Pole P/N This Side (0.8) .031 1 2 3 (2.5) Travel .098 (0.3) Typ .012 (2.54) .100 (0.7) Typ .028 (2.54) .100 (2.54) .100 (2.5) .098 (15.0) .589 (5.3) .208 (0.5) .020 (1.0) (3.1) .039 .122 (2.54) Typ .100 (10.2) .402 1 2 3 (1.0) .039 (2.54) Typ .100 (0.6) Dia Typ .024 (1.0) .039 C L C L (0.8) Dia Typ .031 (2.54) .100 (5.7) .224 AS12AV Actuator shown in LEFT position Vertical PC (2.4) Sq .094 (0.4) .016 (2.06) .081 Double Pole P/N This Side (0.8) .031 1 4 5 6 4 1 2 3 (0.3) Typ .012 (5.08) .200 (9.5) .374 (2.5) Travel .098 (0.7) .028 (5.08) .200 (2.5) .098 (5.3) .208 (1.0) (0.5) (3.1) .039 .020 .122 (2.54) Typ .100 2 3 (10.2) .402 5 6 (5.08) .200 (2.54) Typ .100 (5.08) .200 (15.0) .589 (0.6) Dia Typ .024 (5.08) .200 (0.8) Dia Typ .031 AS22AV Actuator shown in LEFT position 03-07 NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com |
Price & Availability of AS24CH |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |