![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only FEATURES * AC input response * Current transfer ratio ( CTR : MIN. 20% at IF = 1mA, VCE = 5V ) * Isolation voltage between input and output LTV-354T-TP1 ( Viso = 3,750Vrms ) * Employs double transfer mold technology * Subminiature type * Mini-flat package : 2.0 profile : LTV-354T-TP1 * Packing volume : 3000 pcs / Reel * UL approved ( No. E113898 ) * CUL approved ( No. E113898 , 01SC19287 ) * CSA approved ( No. 1243207 ) * FIMKO approved ( No. FI-16420 ) * NEMKO approved ( No. P01100403 ) * DEMKO approved ( No. 310475-01 ) * SEMKO approved ( No. 0109173 / 01-08 ) * VDE approved ( No. 094722 ) * RoHS compliance APPLICATIONS * Hybrid substrates that require high density mounting. * Programmable controllers Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 1 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only OUTLINE DIMENSIONS LTV-354T-TP1 : *1. 2-digit date code. *2. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). *3. Rank shall be or shall not be marked. Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 2 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TAPING DIMENSIONS Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 12 0.3 ( .47 ) 4 0.1 ( .15 ) 5.5 0.1 ( .217 ) 2 0.1 ( .079 ) 8 0.1 ( .315 ) Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 3 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ABSOLUTE MAXIMUM RATING ( Ta = 25C ) PARAMETER Forward Current INPUT Power Dissipation Collector - Emitter Voltage Emitter - Collector Voltage OUTPUT Collector Current Collector Power Dissipation Total Power Dissipation *1 Isolation Voltage Operating Temperature Storage Temperature *2 Soldering Temperature IC PC Ptot Viso Topr Tstg Tsol 50 150 170 3,750 -55 ~ +100 -55 ~ +150 260 mA mW mW Vrms C C C P VCEO VECO 70 35 6 mW V V SYMBOL IF RATING 50 UNIT mA *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 4 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25C ) PARAMETER Forward Voltage INPUT Terminal Capacitance Collector Dark Current Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector Current *1 Current Transfer Ratio Collector-Emitter Saturation Voltage TRANSFER CHARACTERISTICS Isolation Resistance Floating Capacitance Response Time (Rise) Response Time (Fall) Ct ICEO BVCEO -- -- 35 30 -- -- 250 100 -- pF nA V V=0, f=1KHz VCE=20V, IF=0 IC=0.1mA IF=0 IE=10A IF=0 IF=1mA VCE=5V IF=20mA IC=1mA DC500V 40 ~ 60% R.H. V=0, f=1MHz VCE=2V, IC=2mA RL=100 SYMBOL MIN. TYP. MAX. UNIT VF -- 1.2 1.4 V CONDITIONS IF=20mA OUTPUT BVECO IC CTR VCE(sat) 6 0.2 20 -- -- -- -- 0.1 -- 4 400 0.2 V mA % V pF s s Riso Cf tr tf 5x1010 1x1011 -- -- -- 0.6 4 3 -- 1 18 18 *1 CTR = IC x 100% IF Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 5 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only RANK TABLE OF CURRENT TRANSFER RATIO CTR MODEL NO. LTV-354T RANK MARK A A or No mark CTR ( % ) 50 ~ 150 20 ~ 400 IF = 1 mA CONDITIONS VCE = 5 V Ta = 25 C Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 6 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature 60 Forward current IF (mA) Fig.2 Collector Power Dissipation vs. Ambient Temperature Collector power dissipation Pc (mW) 200 50 40 30 20 10 0 -55 150 100 50 0 25 50 75 100 o 125 0 -55 0 25 50 75 100 o 125 Ambient temperature Ta ( C) Ambient temperature Ta ( C) Fig.3 Collector-emitter Saturation Voltage vs. Forward Current Collector-emitter saturation voltage VCE(sat) (V) Fig.4 Forward Current vs. Forward Voltage 500 Forward current IF (mA) 6 5 4 3 2 1 0 0 2.5 5.0 7.5 10.0 12.5 15.0 Forward current IF (mA) Ic= 0.5mA 1mA 3mA 5mA 7mA Ta= 25 C O 200 100 50 20 10 5 2 1 0 Ta= 75 C 50 C o o 25 C 0C -25 C o o o 0.5 10 15 20 25 30 Forward voltage VF (V) Fig.5 Current Transfer Ratio vs. Forward Current 140 Current transfer ratio CTR (%) Fig.6 Collector Current vs. Collector-emitter Voltage VCE= 5V Ta= 25 C o 50 Collector current Ic (mA) Ta= 25 C o 120 100 80 60 40 20 0 0.1 0.2 0.5 1 2 40 IF= 30mA 30 20 10 0 Pc(MAX.) 20mA 10mA 5mA 1mA 0 1 2 3 4 5 6 7 8 9 10 5 10 20 50 100 Forward current IF (mA) Collecotr-emitter voltage VCE (V) Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 7 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only CHARACTERISTICS CURVES Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature 150 Relative current transfer ratio (%) Fig.8 Collector-emitter Saturation Voltage vs. Ambient Temperature Collector-emitter saturation voltage VCE(sat) (V) 0.10 IF= 1mA, VCE= 5V IF= 20mA IC= 1mA 0.08 0.06 0.04 0.02 0 100 50 0 20 40 60 80 o 100 20 40 60 80 o 100 Ambient temperature Ta ( C) Ambient temperature Ta ( C) Fig.9 Collector Dark Current vs. vs. Ambient Temperature 10000 Fig.10 Response Time vs. Load Resistance 100 50 Response time ( s) Collector Dark Current ICEO (nA) VCE= 20V 1000 20 10 5 2 1 0.5 0.2 VCE= 2V Ic= 2mA o Ta= 25 C tr tf td ts 100 10 1 20 40 60 80 o 0.1 100 0.1 0.2 0.5 1 2 5 10 Ambient Temperature Ta ( C) Load resistance RL (k ) Fig.11 Frequency Response Test Circuit for Response Time Vcc Input Input Output Output Voltage gain Av (dB) 0 V = 2V Ic= 2mA o Ta= 25 C RD RL 10% 90% td ts tr tf RL= 1k -10 1k 100 Test Circuit for Frequency Response Vcc RD -20 0.2 0.5 1 2 5 10 100 1000 RL Output Frequency f (kHz) Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 8 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TEMPERATURE PROFILE OF SOLDERING REFLOW (1) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 9 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TEMPERATURE PROFILE OF SOLDERING REFLOW (2) When using another soldering method such as infrated ray lamp, the temperature may rise partially in the mold of the device. Keep the temperature on the package of the device within the condition of above (1) RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 10 of 10 |
Price & Availability of LTV-354T-TP1
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |