View KCR1206T_4606744.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

KCR
three-terminal capacitor/resistor
EU
features * * * * * Improved reduction of radiated noises Capacitor/resistor filter Noise reduction in a variety of circuits Marking: Black body color with no marking Products with lead-free terminations meet EU RoHS requirements
dimensions and construction
L Size W 1206 t e Glass Coating g GND Terminals (Ag + Ni, Sn Plating) e Terminals (Ag + Ni, Sn Plating) L W t g e .126.008 .063.008 .031.008 .039.012 .016.012 (3.20.2) (1.60.2) (0.80.2)* (1.00.3) (0.40.3)
* KCR1206T221/500: t = .043 .008 (1.1 0.2) KCR1206T221/101: t = .043 .008 (1.1 0.2)
ordering information
New Part #
EMI/EMC filtering
KCR Type
1206 Size 1206
T Termination Material T: Sn
TE Packaging TE: 7" embossed plastic (1206 - 2,000 pieces/reel)
220/500 Capacitance/ Resistance 2 significant digits + number of zeros
For further information on packaging, please refer to Appendix A.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
2/24/08
276
KOA Speer Electronics, Inc. * Bolivar Drive * P Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com .O.
KCR
three-terminal capacitor/resistor circuit schematic
In Out Item Operating Temperature Range Storage Temperature Range Measuring Condition (Standard) Temperature Relative Humidity Measuring Condition (Precision) Temperature Relative Humidity Specification -40C to +85C -40C to +85C 15C to 35C 20 - 90% 20C 1C 60 - 67%
applications and ratings
GND
applications and ratings (continued)
Part Designation KCR1206TTE220/500 KCR1206TTE220/101 KCR1206TTE470/500 KCR1206TTE470/101 KCR1206TTE101/500 KCR1206TTE101/101 KCR1206TTE221/500 KCR1206TTE221/101 Capacitance (pF) 22 22 47 47 100 100 220 220 Capacitance Tolerance Resistance () 50 100 50 100 50 100 50 100 Resistance Tolerance (%) Power Rating (W) Operating Temperature Range
+50 ~ -20
30
1/16
-40C to +85C
environmental applications Performance Characteristics
Parameter Insulation Resistance Capacitance 1000 M Minimum Within the tolerance Requirement Test Method Applied rated voltage for 60 seconds Frequency: 1kHz Voltage: 1Vrms DC: 0.3V Maximum Solder a chip to a test substrate and then laterally apply a load (5N, 500gF) in the arrow direction Chip
DC Resistance Terminal Adhesion Strength
Within the tolerance No physical damage
Substrate Resistance to Solder Heat Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Flux: 25% rosin Preheating: 60 seconds Preheating Temperature: 150C Solder: H60A Solder Temperature: 260C 5C Dip Time: 5 seconds 0.5 second
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
5/15/05
KOA Speer Electronics, Inc. * Bolivar Drive * P Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com .O.
277
EMI/EMC filtering
KCR
three-terminal capacitor/resistor environmental applications (continued) Performance Characteristics
Parameter Solderability Requirement More than 95% of the terminal electrode shall be covered with new solder Test Method Flux: 25% rosin Preheating: 60 seconds Preheating Temperature: 150C Solder: H60A Solder Temperature: 230C 5C Dip Time: 4 seconds 1 second Repeat the following heat cycle 10 times: Step: 1 2 3 4 Temperature: -40C 3C Room Temp. 85C 2C Room Temp. Time: 30 minutes 15 minutes 30 minutes 15 minutes 3 minutes maximum 3 minutes maximum
Temperature Cycle*
Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance
High Temperature Resistance*
Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Appearance: No physical damage Capacitance: Within tolerance
Temperature: 70C 2C Bias: 150% of rated voltage Test Time: 1000 +48/-0 hours
Humidity Resistance (Unload)*
Temperature: 85C 2C Humidity: 85% 5% Test Time: 500 +24/-0 hours
Substrate Bending Test
After soldering a chip to a test substrate, bend the substrate by 1 mm and then measure. The substrate is GE4 or based on GE4. 20 Substrate
Weight Displacement
45 2 Humidity Resistance (Load)* Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance
45 2
Temperature: 40C 2C Humidity: 90 - 95% Bias: 100% of rated voltage Test Time: 500 +24/-0 hours Temperature: -40C 2C Test Time: 1000 +48/-0 hours
Low Temperature Resistance (Unload)*
EMI/EMC filtering
Vibration
The frequency of applied vibration should be swept from 10 Hz to 55 Hz and return to 10 Hz. This cycle time should be about 1 minute and this cycle should be repeated. Amplitude (Total Excursion): 1.5 mm This motion shall be applied for a period of 2 hours in each of 3 mutually perpendicular axes (total of 6 hours).
* After temperature cycle test, high temperature resistance test, humidity resistance test or low temperature resistance test, the tested sample should be measured after having been left in temperature from 15C to 35C and relative humidity from 45% to 75% for 24 hours.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
11/01/03
278
KOA Speer Electronics, Inc. * Bolivar Drive * P Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com .O.

▲Up To Search▲

Price & Availability of KCR1206T

	To Download KCR1206T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .