 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| High frequency amplifier transistor, RF switching (6V, 50mA) 2SC4774 / 2SC4713K Features 1) Very low output-on resistance (Ron). 2) Low capacitance. Dimensions (Unit : mm) 2SC4774 2.0 0.3 (3) 0.9 0.2 0.7 1.25 Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC PC Tj Tstg Limits 12 6 3 50 0.2 150 -55 to +150 Unit V V V mA W C C (2) (1) 2.1 Absolute maximum ratings (Ta=25C) 0.65 0.65 1.3 0.15 Each lead has same dimensions ROHM : UMT3 EIAJ : SC-70 (1) Emitter (2) Base (3) Collector 2SC4713K Packaging specifications and hFE Type Package hFE Marking Code Basic ordering unit (pieces) 2SC4774 UMT3 S 2SC4713K SMT3 S (3) 2.9 0.4 1.1 0.8 Denotes hFE 0.95 0.95 0.15 1.9 Each lead has same dimensions ROHM : SMT3 EIAJ : SC-59 (1) Emitter (2) Base (3) Collector Electrical characteristics (Ta=25C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance Output-on resistance Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Ron Min. 12 6 3 - - - 180 300 - - Typ. - - - - - - - 800 1 2 Max. - - - 0.5 0.5 0.3 560 - 1.7 - Unit V V V A A V - MHz pF IC=10A IC=1mA IE=10A VCB=10V VEB=2V IC/IB=10mA/1mA VCE/IC=5V/5mA VCE=5V, IE= -10mA, f=200MHz VCB=10V, IE=0A, f=1MHz IB=3mA, VI=100mVrms, f=500kHz Conditions This product might cause chip aging and breakdown under the large electrified environment. Please consider to design ESD protection circuit. www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 1/2 2009.12 - Rev.C 0.3Min. BM T106 3000 BM T146 3000 (2) (1) 1.6 2.8 0.1Min. 2SC4774 / 2SC4713K Electrical characteristic curves 10 125C Data Sheet -25C COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) 8 25mA 40 1.0 m 30mA COLLECTOR CURRENT : IC (mA) A 0.2mA 40 6 20mA 15mA 30 0.1mA 30 4 10mA 20 20 2 5mA 10 IB=0mA 0.4 0.5 10 0 0 1 2 3 IB=0A 4 5 0 0 0.1 0.2 0.3 0 0 0.4 25C Ta=25C 35mA 50 Ta=25C mA A 0.5 0.4m 0.3mA 50 VCE=5V 0.8 1.2 1.6 2.0 COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) BASE TO EMITTER VOLTAGE : VBE (V) Fig.1 Grounded emitter output Fig.2 Grounded emitter output Fig.3 Grounded emitter propagation characteristics ( ) characteristics ( ) characteristics COLLECTER SATURATION VOLTAGE : VCE(sat) (mA) DC CURRENT TRANSFER RATIO : hFE 500 Ta=25C VCE=5V 500 Ta=25C IC/IB=10 GAIN BANDWIDTH PRODUCT : fT (MHz) 1000 1000 2000 1000 500 Ta=25C VCE=5V 200 100 50 200 100 50 20 10 200 100 50 20 10 0.1 0.2 5 0.1 0.2 0.5 1 2 5 10 20 50 0.5 1 2 5 10 20 50 20 0.1 0.2 0.5 1 2 5 10 20 50 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) Fig.4 DC current gain vs. collector current Fig.5 Collector-emitter saturation Fig.6 Gain bandwidth product vs. voltage vs. collector current collector current 20 FEEDBACK CAPACITIANCE : Cre (pF) 50 Ta=25C f=1MHz 20 Ta=25C f=1MHz ON RESISTANE : Ron () OUTPUT CAPACITANCE : Cob (pF) 10 5 10 5 20 10 5 Ta=25C f=500kHz i=100mVrms RL=1k 2 1 0.5 2 1 0.5 2 0.2 0.1 0.2 0.5 1 2 5 10 20 50 0.2 0.1 0.2 1 0.1 0.2 0.5 1 2 5 10 20 50 0.5 1 2 5 10 20 50 COLLECTOR TO BASE VOLTAGE : VCB (V) COLLECTOR TO BASE VOLTAGE : VCB (V) BASS CURRENT : IB (mA) Fig.7 Collector output capacitance vs. voltage Fig.8 Back capacitance voltage Fig.9 Output-on resistance vs. base current www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 2/2 2009.12 - Rev.C Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of 2SC413709
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |