![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Tyco / Electronics Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866 PolySwitch(R) PTC Devices Overcurrent Protection Device PRODUCT: MINISMDC110 DOCUMENT: SCD 23489 PCN: 472815 REV LETTER: H REV DATE: JUNE 10, 2002 PAGE NO.: 1 OF 1 Specification Status:RELEASED Maximum Electrical Rating Voltage: 8VDC Short Circuit Current: 100A Notes: 1. All terminations are tin/lead plated. 2. Devices can be wave soldered. 3. Drawing not to scale Marking: 1 TABLE I. DIMENSIONS: A B C MIN MAX MIN MAX MIN MAX mm: 4.37 4.73 0.38 0.62 3.07 3.41 in: (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) D MIN 0.30 (0.012) E MIN MAX 0.25 0.50 (0.010) (0.020) TABLE II. PERFORMANCE RATINGS: CURRENT RATINGS ** AMPERES AT - 40C HOLD 1.60 AMPERES AT 20C HOLD 1.10 AMPERES AT 60C HOLD 0.71 TIME TO TRIP ** @ 8.0A SECONDS AT 20C MAX 0.3 RESISTANCE VALUES OHMS AT 20C MIN MAX* 0.04 0.21 TRIPPED-STATE POWER DISSIPATION ** WATTS AT 20C MAX 1.2 * Maximum resistance is measured 1 hour after reflow ** Values Specified were determined using PCB's with 0.030"X1.5 ounce copper traces. Reference Documents: Precedence: Effectivity: CAUTION: PS300, E. N. SMD1.0x. This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. 1 PART IDENTIFICATION MANUFACTURER'S MARK |
Price & Availability of MINISMDC110
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |