View AXIS30_4560020.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Issue: 08 Date: 2008-01-25 Specification AXIS30 Oscillator type : Wideband VCXO with low jitter SMD replacement of Fujitsu M2 (F100) Parameter
Frequency range Standard frequencies Frequency stability Initial tolerance vs. temperature in operating frequency range -20~+70C (see Note 2) vs. supply voltage variation vs. load change long term (aging) 1st year Aging following years Frequency adjustment range Electronic Frequency Control (EFC) range *see Note 3
min.
typ.
max.
Unit
MHz MHz ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm V V k
Condition
10 90 12.288 / 16.384 / 22.579 / 24.576 / 27.000 / 28.224
80 -10 -5 -10 -5 500 500 1000 1500 2000 2500 3000 0.25 0.15 positive 100 HCMOS 15 10 40 60 4 4.75 5.0 5.25 3.13 3.3 3.47 40 -45 +90 -50 +95 14.4x9.5x6 max 3 Tape & reel 1500 10 5 10 5
@ 40C @ 40C Option 2 = " " Option 2 = "500" Option 2 = "1000" Option 2 = "1500"* Option 2 = "2000"* Option 2 = "2500"* Option 2 = "3000"* Option 1 = "50" (5 V) Option 1 = "33" (3.3 V)
1100 1600 2100 2600 3200 4.75 3.15
EFC voltage VC EFC slope (f / VC) EFC input impedance RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS Current consumption (steady state) Operable temperature range Storage temperature range Enclosure (see drawing) Weight Packing ESD Sensitivity
pF ns % ms V V mA C C mm gram V
@ VS/2 Option 1 = "50" (5 V) Option 1 = "33" (3.3 V) @ +25C
IEC 61837 CO 27 IEC 60286-3 HBM as in IEC 610004-2
Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated 2. Frequency vs. temperature response is a 2nd order parabola with turn-over point around +20C to +30C 3. *Pulling Range Option 2 = "1500" or larger only possible with EFC voltage 0.25V ~ 4.75 V
Ordering Code:
Model (Specification) AXIS30
GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany
Option 1 Supply 50
Option 2 Pulling Range 500 AXIS30
page 1(2)
Frequency [MHz] 28.224
www.axtal.com fon: +49 (6261)939834 fax: +49 (6261) 939836 E-mail: info@axtal.com
Enclosure drawing
Pin connections
Pin # Symbol 1 VC 2 N.C. 3 GND 4 RF OUT 6 Vs Function Control Voltage (EFC) No connection Ground RF Output (see table) Supply Voltage
Environmental conditions:
Test Visual inspection, dimensions Solderability Resistance to soldering heat Shock* IEC 60068 Part ... IEC 60679-1 clause ... 4.3 2-20 2-58 2-27 4.6.3 Test conditions Enclosure styles as in IEC 60679-3 or 61837, if applicable Test Ta (235 5)C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g 30 days @ 85C, OCXO @25C 1000h, 2000h, 8000h @85C
4.6.8 4.6.7
Vibration, sinusoidal* 2-6
Endurance tests - ageing - extended aging
4.7.1 4.7.2
GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany
AXIS30
page 2(2)
www.axtal.com fon: +49 (6261)939834 fax: +49 (6261) 939836 E-mail: info@axtal.com

▲Up To Search▲

Price & Availability of AXIS30

	To Download AXIS30 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .