|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
10~18W AC-DC Single Output Desktop Features : Universal AC input / Full range GS18B for 5~48V output series No load power consumption<0.5W Pass energy star(CEC) level 2 pole AC inlet IEC320-C8 Class power (without earth pin) Full output 3~48V safety approval Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case LED indicator for power on Approvals: UL / CUL / TUV / BSMI / CB / FCC / CE Pass LPS for 9~48V output 2 years warranty Meet EISA 2007 (Energy Independence and Security Act) for 5 ~ 48V SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER (max.) OUTPUT GS18B03 Note.2 3.3V TUV Rheinland Product Safety geprUfre Sicherheit GS18B03-P1J GS18B05-P1J GS18B07-P1J GS18B09-P1J GS18B12-P1J GS18B15-P1J GS18B18-P1J GS18B24-P1J GS18B28-P1J GS18B48-P1J GS18B05 5V 3.0A 0 ~ 3.0A 15W 50mVp-p 5.0% 1.0% 5.0% GS18B07 7.5V 2.0A 0 ~ 2.0A 15W 80mVp-p 5.0% 1.0% 5.0% GS18B09 9V 2.0A 0 ~2.0A 18W 80mVp-p 5.0% 1.0% 5.0% GS18B12 12V 1.50A 0 ~ 1.50A 18W 80mVp-p 3.0% 1.0% 3.0% GS18B15 15V 1.20A 0 ~ 1.20A 18W 100mVp-p 3.0% 1.0% 3.0% GS18B18 18V 1.0A 0 ~ 1.0A 18W 150mVp-p 3.0% 1.0% 3.0% GS18B24 24V 0.75A 0 ~ 0.75A 18W 180mVp-p 2.0% 1.0% 2.0% GS18B28 28V 0.64A 0 ~ 0.64A 18W 240mVp-p 2.0% 1.0% 2.0% GS18B48 48V 0.375A 0 ~ 0.375A 18W 240mVp-p 2.0% 1.0% 2.0% 3.0A 0 ~ 3.0A 10W RIPPLE & NOISE (max.) Note.3 50mVp-p VOLTAGE TOLERANCE Note.4 5.0% LINE REGULATION LOAD REGULATION Note.5 Note.6 1.0% 5.0% SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC 90 ~ 264VAC 135 ~ 370VDC VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 47 ~ 63Hz 68% 73% 79% 500ms, 20ms, 15ms/115VAC at full load 79% 81% 81% 82% 84% 84% 85% 0.5A / 100VAC 45A / 230VAC 0.25mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Clamp by zener diode, output short 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION Compliance to EN55022 class B, FCC PART 15 / CISPR22 class B, CNS13438 class B (Note. 7) HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY MTBF DIMENSION PACKING PLUG CABLE Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) 79*54*33mm (L*W*H) 210g ; 60pcs / 13.5kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested Standard type UL1185 6ft (4FT for 3.3 ~ 5V output) for stock ; Other type available by customer requested OTHERS CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:GS18B-SPEC 2008-05-08 10~18W AC-DC Single Output Desktop Mechanical Specification GS18B series Unit:mm UL1185 16AWG 1230 50mm for 3.3~5V UL1185 18AWG 1830 50mm for 7.5~48V POWER LED 70 10mm C"+" 11 0.5mm ID 2.1 x OD 5.5 NAME PLATE 79 33 Plug Assignment Standard plug: P1J (option) P1J 54 P/N CENTER OUTPUT + Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 50 80 60 70 0 10 20 30 40 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:GS18B-SPEC 2008-05-08 |
Price & Availability of GS18B03-P1J |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |