 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| COMMUNICATIONS MODULES & SUBSYSTEMS 10GBASE-SR XFP Optical Transceiver JXP Series Key Features * 850 nm VCSEL for up to 300 m reach over MMF * Positive power supply operation (1.8 V, 3.3 V, 5.0 V) * Power dissipation 2.0 W max * Power-down capability to less than 50 mW * Supports data rates from 9.95 Gb/s to 11.10 Gb/s * XFI AC-coupled electrical interface * Digital Diagnostic Monitoring (DDM) support * Integrated electrical equalization on transceiver transmit side * Integration Clock and Data Recovery (CDR) for receive and transmit data path * No reference clock needed for JXP-01SGAA1 * Bail latch for easy removal * Bit error rate <10-12 Applications * Storage Area Networks (SAN) * Ethernet switches and applications * Fibre channel switches and applications * Local Area Networks (LAN) * Client/Server environments The JXP Series 10 Gb/s 850 nm XFP Transceiver is an integrated fiberoptic transceiver that provides a high-speed serial link at signaling rates from 9.95 Gb/s to 11.10 Gb/s. The module complies with IEEE 802.3ae 10GBASE-SR (Ethernet) and 10 GFC 1200-MX-SN-I (Fibre Channel) standards, as well as with the XFP Transceiver Multisource Agreement (MSA). The 10 Gb/s 850 nm XFP Transceiver is protocol-agnostic and can be used for Ethernet or Fibre Channel systems, thereby lowering customer inventory requirements and costs. The 10 Gb/s 850 nm XFP Transceiver integrates receive and transmit paths in one package and is designed for reliability and performance. On the transmit side, the 10 Gb/s serial data stream is recovered, retimed, and passed to a laser driver. The laser driver biases and modulates an 850 nm VCSEL, enabling data transmission at distances of up to 300 m over multimode fiber (MMF) through an industry standard LC connector. On the receive side, the 10 Gb/s optical data stream is recovered from a PIN photodetector/transimpedance amplifier, retimed, and passed to an output driver. This module features a hot-pluggable XFI compliant electrical interface. Compliance * IEEE 802.3ae standard * 10 GFC 1200-MX-SN-I standard * Class 1 Laser Safety * UL and TUV certified * Tested in accordance with Telcordia GR-468 NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com 10GBASE-SR XFP OPTICAL TRANSCEIVER 2 JXP-01SGAA1 Module Block Diagram Vcc3 Vcc5 Vcc2 Vee5 No Connect GND Transceiver Ground Power Supply Sequence / In Rush Control Circuit ROSA RDRD+ CDR / Limiting Amplifier TIA REFCLK+ REFCLK- XFI Loopback MicroProcessor TDTD+ RX_LOS MOD_NR INTERRUPT MOD_DESEL PDOWN/RST MOD_ABS Vcc3 Vcc3 GND Vcc3 CDR / Equalizer Laser Driver TOSA SCL SDA TX_DIS JXP-01SWAA1 Module Block Diagram Vcc3 Vcc5 Vcc2 Vee5 No Connect GND Transceiver Ground Power Supply Sequence / In Rush Control Circuit ROSA RDRD+ CDR / Limiting Amplifier TIA REFCLK+ REFCLK- XFI Loopback MicroProcessor TDTD+ RX_LOS MOD_NR INTERRUPT MOD_DESEL PDOWN/RST MOD_ABS Vcc3 Vcc3 GND Vcc3 CDR / Equalizer Laser Driver TOSA SCL SDA TX_DIS 10GBASE-SR XFP OPTICAL TRANSCEIVER 3 Specifications Parameter Electrical Interface Transmit signal input differential swing Receive signal input differential swing Control I/O signals External reference clock Optical Wavelength Data rate Minimum launch power into fiber (average) Maximum launch power into fiber (average) Transmitter and dispersion penalty (TDP) Stressed receiver sensitivity (OMA) Maximum bit error rate at minimum receiver sensitivity Power Transceiver power Voltage Voltage tolerance Current Environmental Operating temperature, ambient Operating temperature, case Operating humidity Storage temperature Mechanical Dimensions (W x D x H) Form factor Digital Diagnostic Monitoring Diagnostics Control Serial ID (base and extended) Laser Safety US International JXP-01SWAA1 JXP-01SGAA1 120/820 mVp-p 340/850 mVp-p Low voltage TTL (3.3 V) Yes 850 nm 9.95 to 11.10 Gb/s -7.3 dBm -1.0 dBm 3.9 dB -7.5 dBm <10-12 120/820 mVp-p 340/850 mVp-p Low voltage TTL (3.3 V) No 850 nm 9.95 to 11.10 Gb/s -7.3 dBm -1.0 dBm 3.9 dB -7.5 dBm <10-12 Maximum Maximum Maximum Typical 2.0 W 2.0 W 1.8 V, 3.3 V, 5.0 V 1.8 V, 3.3 V, 5.0 V 5% 5% 530 mA (1.8 V), 110 mA (3.3 V), 60 mA (5.0 V) 0 to 55 C 70 C 8 to 80% -40 to 85 C XFP MSA compliant XFP, LC connector XFP DDM compliant XFP DDM compliant XFP DDM compliant 0 to 55 C 70 C 8 to 80% -40 to 85 C XFP MSA compliant XFP, LC connector XFP DDM compliant XFP DDM compliant XFP DDM compliant Maximum 21 CFR 1040.10 except for deviations pursuant to Laser Notice 50 (2001); UL approved for US and Canada IEC 60825:Am.2 (2001) and IEC 60950 (CB Scheme) 10GBASE-SR XFP OPTICAL TRANSCEIVER Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: JXP-01SGAA1 Product Code JXP-01SGAA1 JXP-01SWAA1 Description 10GBASE-SR XFP Optical Transceiver without External Reference Clock 10GBASE-SR XFP Optical Transceiver with External Reference Clock Telcordia is a registered trademark of Telcordia Technologies Incorporated. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. (c)2007 JDS Uniphase Corporation. All rights reserved. 10143051 Rev. 003 03/07 10GSRXFPTC.DS.CMS.AE NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com March 2007 |
Price & Availability of JXP-01SGAA1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |