 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EV31C6 Series * RoHS Compliant (Pb-Free) * Voltage Controlled Crystal Oscillator (VCXO) * 5.0V Supply Voltage * HCMOS output with Tri-State function * Ceramic 6-pad SMD package * APR Performance to 100ppm * Commercial and Industrial Temperature Range ELECTRICAL SPECIFICATIONS H L W EV31C6 1.65 7.0 5.0 OSCILLATOR 1.544MHz, 2.000MHz, 2.048MHz, 3.088MHz, 3.580MHz, 3.686MHz, 4.000MHz, 4.032MHz, 4.096MHz, 4.434MHz, 5.000MHz, 6.144MHz, 6.176MHz, 6.312MHz, 6.400MHz, 8.000MHz, 8.192MHz, 8.448MHz, 10.000MHz, 12.000MHz, 12.288MHz, 12.352MHz, 12.960MHz, 13.000MHz, 13.500MHz, 14.318MHz, 15.360MHz, 15.440MHz, 16.000MHz, 16.384MHz, 16.660MHz, 17.664MHz, 18.432MHz, 19.200MHz, 19.440MHz, 20.000MHz, 20.480MHz, 24.000MHz, 24.576MHz, 24.704MHz, 25.920MHz, 26.000MHz, 27.000MHz, 28.636MHz, 30.000MHz, 30.720MHz, 32.000MHz, 32.768MHz, 34.368MHz, 35.328MHz, 36.864MHz, 38.880MHz, 40.000MHz, 40.960MHz, 44.736MHz, 50.000MHz, 51.840MHz, 52.000MHz, 62.208MHz, 65.536MHz, 74.250MHz, 77.760MHz Operating Temperature Range (OTR) 0C to 70C or -40C to 85C Storage Temperature Range (STR) -55C to 125C Supply Voltage (VDD) 5.0VDC 10% <27.000MHz Input Current (IDD) 25mA Maximum > 27.000MHz 35mA Maximum Inclusive of All Conditions: Calibration Tolerance at 25C, Frequency Tolerance/Stability 50ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, Shock, and Vibration IOH = -4mA Output Voltage Logic High (VOH) 90% of VDD Minimum IOL = +4mA Output Voltage Logic Low (VOL) 10% of VDD Maximum 20% to 80% of Waveform w/HCMOS Load or w/TTL Load Rise Time / Fall Time (TR/TF) 5 nSeconds Maximum at 50% of Waveform Duty Cycle (SYM) 50 5(%) Typical, 50 10(%) Max. Load Drive Capability (CLOAD) 10TTL Load or 30pF HCMOS Load Max. Aging (at 25C) 2ppm/1st year Typical, 10ppm /10 years Max. Start Up Time (TS) 10 mSeconds Maximum VIH: No Connection Enables Output Tri-State Input Voltage VIH: >0.9VDD Enables Output VIL: <0.1VDD Disables Output: High Impedance FJ=12kHz to 20MHz 1pSec Maximum RMS Phase Jitter Inclusive of All Conditions: Calibration Tolerance at 25C, 50ppm Minimum Absolute Pull Range (APR) Frequency Stability over the Operating Temperature Range, Supply 80ppm Minimum < 51.840MHz only Voltage Change, Output Load Change, Shock, Vibration, and Aging 100ppm Minimum < 36.000MHz only over Control Voltage (VC) 10% Typical, 20% Maximum Linearity 0.5VDC to 4.5VDC Control Voltage (VC): Test Conditions for APR Control Voltage Range (VCR) 0.0VDC to VDD Transfer Function Positive Transfer Characteristic Input Impedance (ZI) 50kOhms Minimum Input Leakage Current 10A Maximum -3dB, VC = 2.5VDC Modulation Bandwidth (MBW) 10kHz Minimum At offset of 10Hz Typical Phase Noise (Fo = 27.000MHz) -70dBc/Hz At offset of 100Hz -100dBc/Hz At offset of 1kHz -130dBc/Hz At offset of 10kHz -147dBc/Hz At offset of 100kHz -152dBc/Hz Frequency Range (FO) MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EV31C6 CERAMIC 5.0V OS60 11/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EV31C6 B 3 A 1 - 35.328M TR OPERATING TEMPERATURE RANGE A=0C to 70C, B=-40C to 85C ABSOLUTE PULL RANGE (APR) 3=50ppm Minimum, 4=80ppm Minimum, 5=100ppm Minimum AVAILABLE OPTIONS Blank=Bulk (Standard) TR=Tape and Reel FREQUENCY MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1: Control Voltage (VC) Pin 2: Tri-State Pin 3: Case Ground Pin 4: Output Pin 5: No Connect Pin 6: Supply Voltage Tolerances= +0.1 TAPE A 16.3-.1 B 7.5.1 C 6.75.1 D 4 .1 E 2.1 F REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1,000 F 8.1 G B0* H 1.5 +.1-0 J A0* K .3 .05 L K0* R 2.5 MIN S 10 MIN T 22.4 MAX U 360 MAX V 16.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Line 1: ECLIPTEK Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EV31C6 CERAMIC 5.0V OS60 11/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. |
Price & Availability of EV31C6
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |