![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Short Body Pushbuttons Series LP01 Distinctive Characteristics Environmentally friendly components and packaging materials meet RoHS Directive restricting use of hazardous materials. Suited for lead-free soldering because of heat resistant resin materials. Smooth, slightly concave surface of cap designed to fit fingertip. Unique design and construction of cap prevents its removal and limits tampering. Bright LED illumination in choice of red, green, or amber through translucent white cap. Short body of .551" (14.0mm) conserves behind-panel space. Combination solder lug and .110" quick connect terminals. Crisp actuation and clear circuit status provided by snap-action contact mechanism. Arc barrier between movable contacts protects against crossover. Nonilluminated models available and shown in the Pushbutton section. Actual Size NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 05-08 Short Body Pushbuttons Series LP01 General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel: 50 milliohms maximum 200 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum 1,500V AC minimum between contacts and case for 1 minute minimum 500,000 operations minimum 50,000 operations minimum 1.5N for Single Pole; 3.0N for Double Pole Nonshorting (break-before-make) Total Travel .118" (3.0mm) Materials & Finishes Actuator: Housing: Base: Movable Contact: Stationary Contacts: Lamp Terminals: Polycarbonate Bushing mount: Glass fiber reinforced polyamide (UL94V-0); Snap in mount: Polyphenylene ether (UL94V-0) Diallyl phthalate (UL94V-0) Phosphor bronze & silver with silver plating Common terminal: Phosphor bronze with silver plating; Contact terminals: Phosphor bronze with tin & copper plating Phospher bronze with tin and copper plating Environmental Data Operating Temp Range: Humidity: Vibration: Shock: -10C through +50C (+14F through +122F) 90 ~ 95% humidity for 240 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Mounting Torque: Soldering Time & Temperature: Cleaning: 0.8Nm (7.08 lb*in) Manual Soldering: See Profile A in Supplement section. Hand clean locally with alcohol based solution Standards & Certifications Flammability Standards: UL Recognition: C-UL Recognition: R UL94V-0 housing & base All single & double pole models recognized at 3A @ 125V/250V AC or 3A @ 30V DC UL File No. WOYR2.E44145; add "/U" to end of part number to order UL mark on switch All single & double pole models recognized at 3A @ 125V/250V AC or 3A @ 30V DC C-UL File No. WOYR8.E44145; add "/C-UL" to end of part number to order C-UL mark on switch NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 05-08 Short Body Pushbuttons TYPICAL SWITCH ORDERING EXAMPLE Series LP01 5C LEDS 5C 5D 5F Red Amber Green LP01 POLES 1 2 SPDT DPDT 1 5 C C K HOUSING K Black W01 B MOUNTING TYPES C M Bushing Snap-in CIRCUIT 5 ON (ON) ( ) = Momentary W01 CONTACTS & TERMINALS Silver Rated 3A @ 125V AC/250V AC Solder Lug/Quick Connect Terminals CAP COLOR B White DESCRIPTION FOR TYPICAL ORDERING EXAMPLE LP0115CCKW015CB White Cap SPDT ON-(ON) Circuit Silver Contacts Rated 3A @ 125/250V AC Solder Lug/ Quick Connect Terminals Red LED Bushing Mount Black Housing IMPORTANT: Switches are supplied without UL & C-UL marking unless specified. Specific models & ratings noted on General Specifications page. POLES & CIRCUIT Plunger Position ( ) = Momentary Normal Pole SP Model LP0115 ON (ON) 1-3 1-2 Down Connected Terminals Normal Down Throw & Power/Lamp Schematics Note: Terminal markings "COM, NO, NC, L, + and - " are actually on the switch; terminal numbers are not on the switch. 1 (COM) SPDT L (+) 3 1 (COM) 3 2 6 2 4 L (+) 5 (-) L DP LP0125 ON (ON) 1-3 4-6 1-2 4-5 DPDT (-) L NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 05-08 Short Body Pushbuttons MOUNTING TYPES C Bushing .630" (16.0mm) Diameter This mounting option is supplied with a brass hexagon nut with nickel plating. Recommended Panel Thickness: .079" ~ .256" (2.0mm ~ 6.5mm) (1.7) + 0.0 - 0.1 .067 + 0.1 (7.5) - 0.0 .295 Series LP01 M Snap-in .669" (17.0mm) Diameter Recommended Panel Thickness: .039" ~ .126" (1.0mm ~ 3.2mm) 0.2 (18.1) + 0.0 - .713 (16.0) .630 + 0.2 - 0.0 Dia 0.2 (1.1) + 0.0 R - .043 0.2 (17.3) + 0.0 Dia - .681 Allow .984" (25.0mm) distance between switches when mounted side-by-side. Allow .827" (21.0mm) distance between switches when mounted side-by-side. HOUSING K Black Housing available in black only. The one-piece body and bezel have a matte finish. CONTACT MATERIALS, RATINGS, & TERMINALS W01 Silver Power Level Solder Lug/ .110" (2.8mm) Quick Connect Epoxy Seal (2.0) .079 (2.8) .110 (7.3) .287 (0.6) R .024 3A @ 125V AC/250V AC; 3A @ 30V DC Note: If used at 1A @ 125V AC/250V AC or 1A @ 30V DC, electrical life will be 100,000 operations minimum. (1.2) .047 Thk = (0.5) .020 CAP COLOR B White The translucent cap is an integral part of the switch and is not available separately. Material: Polycarbonate Finish: Matte NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 05-08 Short Body Pushbuttons LED COLORS & SPECIFICATIONS Series LP01 The electrical specifications shown are determined at a basic temperature of 25C. LED circuit is isolated and requires external power source. Polarity marks are on the switch. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Single Color LED with 1 Element (+) (-) 5C Colors I FM IF VF VRM I F Red 30mA 20mA 1.95V 5V 0.41mA/C 5D Amber 30mA 20mA 2.0V 5V 0.29mA/C -10C ~ +50C 5F Green 30mA 20mA 2.1V 5V 0.39mA/C LEDs are an integral part of the switch and are not available separately. Forward Peak Current Continuous Forward Current Forward Voltage Reverse Peak Voltage Current Reduction Rate Above 25C Ambient Temperature Range TYPICAL SWITCH DIMENSIONS Bushing Mount * Single Pole M16 P1 (1.2) x (2.0) Typ .047 x .079 (0.5) Typ .020 NO (3.7) .146 3 2 1 NC NO (9.7) .382 (2.8) Typ .110 L -+ COM (13.6) Dia .535 (20.0) Dia .787 (2.5) .098 (5.5) .217 (21.3) .838 (7.3) .287 (3.0) .118 (5.55) .219 LP0115CCKW015CB Bushing Mount * Double Pole M16 P1 (1.2) x (2.0) Typ .047 x .079 (0.5) Typ .020 NO (3.7) .146 3 2 NC 6 5 4 NO L -+ 1 COM (9.7) .382 (2.8) Typ .110 (13.6) Dia .535 (20.0) Dia .787 (2.5) .098 (5.5) .217 (21.3) .838 (7.3) .287 (6.0) .236 (11.1) .437 LP0125CCKW015CB NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 05-08 Short Body Pushbuttons TYPICAL SWITCH DIMENSIONS Snap-in * Single Pole (1.2) x (2.0) Typ .047 x .079 (0.5) Typ .020 Series LP01 (3.7) .146 NO 3 2 1 NC NO (9.7) .382 (2.8) Typ .110 L -+ COM (13.6) Dia .535 (20.0) Dia .787 (2.5) .098 (5.5) .217 (21.3) .838 (7.3) .287 (3.0) .118 (5.55) .219 LP0115CMKW015CB Snap-in * Double Pole (1.2) x (2.0) Typ .047 x .079 (0.5) Typ .020 NO (3.7) .146 3 2 NC 6 L -+ 5 4 COM NO (9.7) .382 (2.8) Typ .110 1 (13.6) Dia .535 (20.0) Dia .787 (2.5) .098 (5.5) .217 (21.3) .838 (7.3) .287 (6.0) .236 (11.1) .437 LP0125CMKW015DB LEGENDS Easily create and submit your own legends using our new on-line Legend Maker. Visit www.nkkswitches.com For other legend support options, customers may either contact the factory or utilize the general information and basic specifications presented below. NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com LM R PW Suggested Printable Area for LP01 Cap Recommended Methods: Pad Print or Laser Etch on cap. Epoxy based ink is recommended. (12.07) Dia .475 (13.6) Dia .535 (0.76) Typ .030 Shaded area is printable area 05-08 |
Price & Availability of LP0115CMKW015CB
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |