 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| COMMUNICATIONS COMpONENTS 850 nm 8.5 G TOSA PL-XLD-00-SH0-C5 Features *Dataratesupto8.5Gbps *-10Cto85Coperation *Opticalpowermonitorwithexcellenttracking *Multiplepinoutoptionsavailable *VCSELTO-canalignedtoLCopticalhousing *OptionalflexattachtoPCBA Benefits * Industry standard housing dimensions * Very high reliability Low FIT High MTBF * Excellent performance over extended operational temperatures * Modulation performance verification The JDSU 850 nm 8.5 Gbps connectorized TOSA product (Transmit Optical SubAssembly) is designed for high-speed data communication applications in 8.5 Gbps transceiver modules. The product utilizes a high performance, high reliability VCSEL integrated in a custom hermetically sealed TO package aligned to a precision LC housing. The device is configured for differential drive and a controlled impedance flex circuit is available for optimum performance. Each unit receives JDSU's proprietary burn-in and stabilization process to insure a low failure rate and long life expectancy while providing continuously consistent performance. The PL-XLD-00-SH0-C5 converts an electrical signal into optical power at data rates up to 8.5 Gbps and it is designed for performance over extended operating temperature and power conditions with high reliability. It is perfectly suited for 50/125 mm multimode fiber. Each part is electro-optically tested to exacting standards. NORTH AMERICA: 800 498-JDSU (5378) wORlDwIDE: +800 5378-JDSU wEBSITE: www.jdsu.com 850 NM 8.5 G TOSA TOSA with Flex Dimensions (lC) UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 2X 5.941 6.599 +0.050 4.039- 0.025 0.660 1 A PIN 2 PIN 3 PIN 4 2.0830.025 BARREL KEYING FEATURE 5.080+0.025 - 0.076 PIN 1 2.9210.025 0.8380.025 9010 1.270 +0.38 6.54 - 0.25 A PIN 5 10.80 PAD 6 PAD 1 0.80 PAD PITCH OPTICAL REF PLANE 2X 2.28 45.00.5 0.40 0.13 0.5 B 4.840 4.039 0.92 1.12 45.00.5 4.166 SECTION A-A 0.46 4X 0.38 12X 2X 0.71 0.30 DETAIL B pl-FlD-00-SH0-C5 (5-lead TOSA, Differential drive, with flex) pad 1 2 3 4 5 6 Symbol KPD GND ALD KLD GND APD Function Monitor Cathode Case/ GND VCSEL Anode VCSEL Cathode Case/GND Monitor Anode 850 NM 8.5 G TOSA 5-lead TOSA without Flex Dimensions (lC) UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 4.039 2.083 0.025 0.838 0.025 +0.050 - 0.025 0.660 5X 13.460 PIN 5 PIN 4 2X 0.250 2X 57 PIN 1 B 2X 5.941 45 1 5.080 +0.025 - 0.076 1.397 2X 82 3X 2.921 0.025 6.599 BARREL KEYING FEATURE 1.270 6.54 +0.38 - 0.25 0.440 PIN 2 PIN 3 2.540 B 10 MAX ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSY AND BARREL 4.039 OPTICAL REF PLANE 4.166 45 1 SECTION B-B pl-FlD-00-SH0-C5 (5-lead TOSA, no flex) pin 1 2 3 4 5 Symbol ALD KLD APD KPD GND Function VCSEL Anode Monitor Cathode Monitor Anode VCSEL Cathode Ground 850 NM 8.5 G TOSA Shipping Information Shipped in anti-static stackable trays. Absolute Maximum Ratings parameter Storage temperature Lead solder temperature Flex attach temperature Laser forward current1 Laser reverse voltage Photodiode forward current ESD2 Symbol Tst Ts TF If BVRLD Ifm Ratings -40 to +100 260 C for 10 sec. 2 mm from case 370 C for 10 sec. 7 -2 2 Class 0 Unit C mA V mA Note: Conditions exceeding those listed may cause permanent damage to the device. Devices subjected to conditions beyond the limits specified for extended periods of time may adversely affect reliability. 1. Average 2. HBM 850 NM 8.5 G TOSA Electro-optical Characteristics (Tcase = 25 C , CW operation unless otherwise stated) parameter VCSEL Peak emission wavelength Case operating temperature RMS spectral width lp temp coefficient Relative intensity noise1 Rise/Fall time Symbol lp Top Dl Dlp RIN12 tr tf Ith DIth Vf Rs efiber h Dh/DT CLD Test Condition Minimum Typical Maximum Unit Pout=0.5 mW Pout=0.5 mW; 10.3125 Gb/s mod. 840 -10 850 860 85 0.65 nm C nm nm/C dB/Hz psec 0.06 10.3125 Gb/s mod. Pout=0.5 mW, 10.3125 Gb/s, 20-80%, filtered T= -10 C to 85 C Pout=0.5 mW Pout=0.5 mW Pout=0.5 mW 6 mA bias Pout=0.5 mW 130 50 Threshold current Ith temperature variation Laser forward voltage Series resistance Coupling efficiency Slope efficiency2 Slope efficiency temperature variation Total capacitance @ VCSEL Small signal bandwidth Optical return loss MonitorPhotodiode Photocurrent Monitor current tracking3 90 0.075 1 +1.0 1.9 100 75 -4000 1.3 +2.0 2.2 110 0.16 0.6 6.375 -12 mA mA V W % mW/mA PPM/C pF GHz dB mA dB IPD DIm ID CM Monitor dark current Monitor capacitance Pout=0.5 mW Vr = 1.5V Pout=0.5 mW T = -10 C to 85 C Vrm = 1.5V Vr = 1.5 V Vrm = 1.5V 0.12 -0.25 0.6 0.25 500 50 nA pF 1. Measured according to IEEE802.3 for RIN under Modulation. 2. Includes connector repeatability, ferrule concentricity, and diameter (50 mm fiber). 3. For constant monitor current. Does not include the effect of fiber coupling efficiency. Order Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: pl-SlD-00-SH0-C5 part Number PL-SLD-00-SH0-C5 PL-FLD-00-SH0-C5 Description Differentialdrive8.5GTOSAwithLChousing Differentialdrive8.5GTOSAwithLChousing,withflex NORTH AMERICA: 800 498-JDSU (5378) wORlDwIDE: +800 5378-JDSU wEBSITE: www.jdsu.com Product specifications and descriptions in this document subject to change without notice. (c) 2008 JDS Uniphase Corporation 30149333 000 0308 PL-XLD-00-SH0-C5.DS.CC.AE March 2008 |
Price & Availability of PL-XLD-00-SH0-C5
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |