 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Pluggables Datasheet Copper Ethernet SFPs Features OP SFP-GC-R - 1000Base-T for Layer 1 devices (no MAC) SFP-GA-R - 1000Base-T for Layer 2 and above devices (with MAC) SFP-SW10/100-R - 10/100Base-TX to 100-FX (system) - Auto-negotiation - Speed and duplex matching MDI/MDI-X automatic detection Plug-and-play functionality Hot-swap support SFP-SW10/100-R SFP-GA-R SFP-GC-R Overview MRV offers three models of Ethernet SFPs for copper media applications.Two of the models support Gigabit Ethernet functionality, and the third one provides unique 10/100 Fast Ethernet solutions. The SFP-GC-R model supports Gigabit Ethernet with a 1000BaseT interface, and it is designed for Layer 1 network devices that do not incorporate an Ethernet MAC. The SFP-GA-R is designed for use in Layer 2 and above devices such as switches and routers that do incorporate an Ethernet MAC. It supports Gigabit Ethernet with an auto-negotiating 1000Base-T interface. SFP-GC-R and SFP-GA-R models each support MDI/MDI-X auto-detection and jumbo packet sizes over 9,600 bytes. Installed into MRV products with an available SFP port, the SFP-GC-R plug-ins provide a simple and cost-effective way to merge copper and fiber network segments. The SFP-GA-R gives network administrators greater flexibility in configuring their SFP-enabled switches and routers, allowing them to use less expensive copper cabling and interfaces for links of 100 meters or less. The SFP-GC-R and SFP-GA-R do not convert between edge devices of different speeds or duplex mode. Connected edge devices must operate at the same speed and duplex mode to communicate. An edge device that supports auto-negotiation may require specific interface settings for fixed Gigabit Ethernet speed and duplex mode operation. The SFP-SW10/100R is a unique Fast Ethernet 10/100 Base-TX to 100FX (system side). It offers auto-negotiation with speed and duplex matching as well as MDI/MDI-X auto-detection. It supports transport of jumbo packets up to 1,600 bytes. The SFP-SW10/100R can translate between edge devices of different speeds or duplex mode. Connected edge devices may operate at different speeds and duplex modes. sales@mrv.com Transmitter always on - does not support LIN function MSA compliance Complete MRV SFP compatibility Pluggables A. Gigabit Ethernet Copper-to-Fiber Conversion with Redundancy SFP-GCs are used in combination with the Fiber Driver Dual Multi-Rate Transponder (EM316DMR3G-3R) to create edge-to-edge redundant Gigabit copper links. Network Switch/Router Network Switch/Router EM316DMR module with SFP-GCs and optical SFPs in a 1-slot Chassis Redundant GbE Copper Links Redundant GbE Copper Links Redundant GbE Fiber Links B. SFP-Enabled GbE Switch/Router The SFP-GA-R is used in an SFP-enabled GbE switch or router to link to a server configured with a copper GbE NIC. Switch/Router Server C. Fast Ethernet Copper-to-Fiber Conversion Converting from copper to fiber and back again, SFP-SW10/100R and optical SFPs are used as interfaces in data rate independent Fiber Driver SFP-toSFP pluggable media modules (EM316-2SFP). The fiber link operates at Fast Ethernet speed. The SFP-SW10/100 matches the speed and duplex mode of each edge device, allowing them operate at different speeds and duplex modes. Switch/Router Workstation EM316-2SFP module with SFP-SW10/100R and optical SFP in a 1-slot Chassis 100Base-TX Copper 100Base-TX Copper GbE Single Mode sales@mrv.com Pluggables Physical Specifications Operating Temperature Range Storage Temperature Relative Humidity Power Regulatory Compliance 00C to 700C (320F to 1580F) -400C to 850C (-400F to 1850F) 85% maximum, non-condensing 1.5 W FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity; RoHS Directive; China RoHS; WEEE Directive: Wheelie Bin Mark Comparison Table RJ-45 connector Cable type Maximum cable length (m) Ethernet Standard Supports speed auto-negotiation Supports duplex auto-negotiation Supports auto MDI/MDI-X detect Match translates between edge devices Used with Layer 0/1 devices (e.g. repeaters converters and WDM transponders) Used with Layer 2 devices, e.g. switches and routers Packet Size (bytes) SFP-GC-R Yes CAT-5 100 1000 Base-T N/A N/A Yes No. Both edge devices must operate in the same duplex mode. Yes No 9600 + SFP-GA-R Yes CAT-5 100 1000 Base-T Yes Yes Yes No. Both edge devices must operate in the same duplex mode. No Yes 9600 + SFP-SW10/100-R Yes CAT-5 100 10/100 Base-TX Yes Yes Yes Yes Yes Yes 1600 Outline Drawing for SFP-GC-R and SFP-GA-R sales@mrv.com Pluggables Outline Drawing for SFP-SW10/100-R [22.48] .885 [15.92] .627 [18.67] .735 .885 .524 [14.48] .570 [77.06] 3.034 [75.69] 2.980 Ordering Information Max. Data Rate (Mbps) Connectors Distance Range (m) 1-100 1-100 1-100 Function Protocol Gigabit Ethernet Gigabit Ethernet Ethernet, Fast Ethernet Voltage (V) 3.3 3.3 Model SFP-GC-R SFP-GA-R SFP supporting 1000Base-T for Layer 0/1 devices. RoHS compliant. SFP supporting 1000Base-T for Layer 2 and higher devices. RoHS compliant. SFP supporting 10/100Base-TX to 100-FX with autonegotiation and speed/duplex matching. RoHs Compliant. 1250 1250 RJ-45 RJ-45 SFP-SW10/100-R 3.3 125 RJ-45 MRV has more than 50 offices throughout the world. Addresses, phone numbers, and fax numbers are listed at www.mrv.com. Please e-mail us at sales@mrv.com or call us for assistance. MRV (West Coast USA) 20415 Nordhoff St. Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV (East Coast USA) 295 Foster St. Littleton, MA 01460 800-338-5316 978-952-4700 MRV (International) Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax. (49) 6105/207-100 All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-FD-SFPCE-071707 3020016-001 Rev. A1 Copyright (c)2007 MRV Communications, Inc. All Rights Reserved. |
Price & Availability of SFP-SW10-100-R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |