View SIL30C_4345671.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SIL30C Series
DC-DC CONVERTERS * * * * * * C Class Non-isolated
12 Vin single output
1 NEW Product
* * *
30 A current rating Input voltage range: 10.2 Vdc to 13.8 Vdc Output voltage range: 0.9 Vdc to 5.0 Vdc Industry leading value * Cost optimized design Excellent transient response Output Voltage adjustability * Pathway for future upgrades * Supports silicon voltage migration * Resulting in reduced design-in and qualification time Designed in reliability: MTBF of > 3.9 million hours per Telcordia SR-332 Current Share Available RoHS compliant
The SIL30C Series is a new high density open-frame non-isolated converter for space sensitive applications. The converter has a wide input range (10.2 Vdc to 13.8 Vdc) and offers a wide 0.9 Vdc to 5 Vdc output voltage range with a 30 A load. The series offers remote ON/OFF, overtemperature protection and overcurrent protection as standard. Its current share facility supports parallel operation of multiple SIL30C units and the remote sense feature enables the SIL30C compensate for voltage drops between the converters output and the load. With full international safety approvals including EN60950 and UL/cUL60950 the SIL30C reduces compliance costs and time to market.
All specifications are typical at nominal input, full load at 25 C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS Voltage adjustability (See Note 1) 0.9-5.0 Vdc 3% 0.2% max. 1.5% max. 0 A/30 A At turn-on At turn-off (See Note 2) Deviation 1.0% max. 100 mV max. 50 mV pk-pk 15 mV rms 75 mV 150 s recovery to within regulation band 10%
INPUT SPECIFICATIONS (CONTD.) Turn ON threshold Turn OFF threshold GENERAL SPECIFICATIONS Efficiency Switching frequency Approvals and standards Material flammability Weight MTBF Telcordia SR-332 Fixed (See Note 7) 91% 300 kHz typ. TUV Product Services IEC60950, UL/cUL60950 UL94V-0 28.3 g (1 oz) 4,456,655 hours 9.0 Vdc 7.6 Vdc
Output setpoint accuracy Using 1.0% trim resistors Line regulation Load regulation Min/max load Overshoot Undershoot Ripple and noise 5 Hz to 20 MHz Transient response (See Note 3) Current share INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 5) Power up Remote ON/OFF Nominal 12 V No load Remote OFF (See Note 4) (See Note 2) Low line to high line Full load to min. load
ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 8) Operating ambient, temperature Non-operating 0 C to +80 C -40 C to +125 C
Full load
10.2-13.8 Vdc 230 mA 30 mA 13.8 A max. @ Io max. and Vin = 10.8 V 150 mA (pk-pk) Logic high >2.4 Vdc <0.8 Vdc <30 ms <30 ms
PROTECTION Short-circuit Overtemperature RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 9) 270 F/20 m esr max. (See Note 9) 2 x 680 F/10 m esr max. Foldback, non-latching Hiccup, non-latching
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E139421 UL60950 file No. E139421 TUV Product Service (EN60950) Certificate No. B04 08 19870 228 CB report and certificate to US/6415C/UL
File Name: SIL30C.PDF Rev (04): 16 Dec 2005
SIL30C Series
DC-DC CONVERTERS C Class Non-isolated
OUTPUT POWER (MAX.) 150 W INPUT VOLTAGE 10.2-13.8 Vdc OVP N/A OUTPUT VOLTAGE (11) 0.9-5 V
12 Vin single output
2 NEW Product
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT CURRENT (MIN.) 0A OUTPUT CURRENT (MAX.) 30 A
EFFICIENCY (TYP.) 91%
REGULATION LINE 0.2% LOAD 1.5%
MODEL NUMBER (10,12,13,14) SIL30C-12SADJ-VJ
Part Number System with Options
SIL30C-12SADJ-VJ
Product Family SIL = Single in Line Rated Output Current 30 = 30 Amps Performance C = Cost Optimised Packaging Options (13) J = Pb-free (RoHS 6/6 compliant) Mounting Option V = Vertical Mount H = Horizontal Mount Number of Outputs SADJ = Single Adjustable Output Input Voltage 12 = 10.2 Vdc to 13.8 Vdc Output Voltage Adjustment of the SIL30C-12SADJ Series
The ultra-wide output voltage trim range offers major advantages to users who select the SIL30C-12SADJ. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL30C-12SADJ converter leaves the factory the output has been adjusted to the default voltage of 0.9 V
Notes
1 2 3 4 5 6 7 8 9 10 Uses external resistor from TRIM to output ground. See Application Note 132 for details. Measured with external filter. See Application Note 132 for details. di/dt = 10 A/s, Vin = Nom, Tc = 25 C, load change = 0.5 lo max to 0.75 lo max and 0.75 lo max to 0.5 lo max. External input fusing is recommended. Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. Signal line assumed <3 m. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. See Application Note 132 for operation above 50 C. See Application Note 132 for ripple current requirements. The standard unit with the suffix '-V' is for vertical mounting. To order a unit with horizontal mounting, please add the suffix '-H' to the model number, e.g. SIL30C-12SADJ-HJ. This model has a wide trim output of between 0.9 Vdc to 5 Vdc. An external resistor adjusts the output voltage. To order a unit with a pin length of 0.150", please add suffix `P4' to the model number, e.g. SIL30C-12SADJ-HP4J. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative.
PIN CONNECTIONS PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 FUNCTION TRIM No Pin Ground Power Good Not Connected Current Share Ground Ground Remote ON/OFF Remote sense (GND) Remote sense (O/P) Vin PIN NO. 13 14 15 16 17 18 19 20 21 22 23 24 FUNCTION Vin Vin Vout Vout Ground Vout Ground Vout Ground Vout Ground Vout
11 12 13 14
File Name: SIL30C.PDF Rev (04): 16 Dec 2005
SIL30C Series
DC-DC CONVERTERS C Class Non-isolated
12 Vin single output
3 NEW Product
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
0.150 (3.82) 0.120 (3.05)
0.470 (11.94)
0.050 (1.27) Ref.
1.250 (31.75
1.350 (34.36)
1.240 (31.40)
0.050 (1.27)
0.100 (2.54) Typ. 2.300 (58.42) 2.400 (60.96)
0.150 (3.81) Ref. 0.212 (5.38) 0.120 (3.05)
1.200 (30.48) 0.290 (7.46)
0.090 (2.29)
All dimensions in inches (mm) General tolerance 0.015in (0.30mm) except where specified otherwise
Figure 1: Mechanical Drawing - Horizontal Mount Version
2.400 (60.96)
0.52 0.02 (13.20 0.5) 0.09 0.02 (2.4 0.5) 1.250 (31.75)
0.062 (1.57) Ref
0.140 (3.56 Typ)
0.050 (1.27) 0.025 0.001 (0.64) Typ 0.025 0.100 (2.54) Typ 2.300 (58.42)
0.140 (3.56)
Pin 1
0.090 (2.29) 0.250 (6.35)
0.050 (1.27) Typ 0.025 0.001 (0.64) Typ. 0.025 0.26 0.03 (6.591 0.76)
0.019 (0.48) Ref
1.200 (30.48)
All dimensions in inches (mm) General tolerance 0.015in (0.30mm) except where specified otherwise
Figure 2: Mechanical Drawing - Vertical Mount Version
Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: Application Note Longform Datasheet
www.artesyn.com
File Name: SIL30C.PDF Rev (04): 16 Dec 2005

▲Up To Search▲

Price & Availability of SIL30C

	To Download SIL30C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .