 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 5KP24A Transient Voltage Suppressor Diodes Pb RoHS COMPLIANCE P600 Features UL Recognized File # E-96005 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated junction 5000W peak pulse power capability with a 10/1000us waveform, repetition rate (duty cycle), 0.05% Excellent clamping capability Low incremental surge resistance Fast response time: Typically less than 1.0ps from 0 Volts to V(BR) Devices with V(BR) >10v ID are typically ID less than 1.0A High temperature soldering guaranteed: 265OC / 10 seconds / .375",(9.5mm) lead length / 5lbs.,(2.3kg) tension Mechanical Data Case: Molded plastic body over glass passivated junction Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: The color band denotes the cathode, which is positive with respect to the anode under normal TVS operation Mounting Position: Any Weight: 0.07 ounce, 2.85 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Peak Power Dissipation at TA=25 C, Tp=1ms O (Note 1) O Steady State Power Dissipation at TL=75 C Lead Lengths .375", 9.5mm (Note 2) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only (Note 3) Operating and Storage Temperature Range Symbol PPPM PD IFSM VF TJ, TSTG Value Minimum5000 8.0 400 3.5 -55 to + 175 Units Watts Watts Amps Volts O C Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25OC Per Fig. 2. 2. Mounted on Copper Pad Area of 0.8 x 0.8" (20 x 20 mm) Per Fig. 4. 3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minutes Maximum. 02.09.2007/rev. a RATINGS AND CHARACTERISTIC CURVES (5KP24A) FIG.1- PEAK PULSE POWER RATING CURVE 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=250C FIG.2- PULSE DERATING CURVE PEAK PULSE POWER (PPP) or CURRENT (IPPM) SERATING IN PERCENTAGE, % 100 Pppm, PEAK PULSE POWER, KW 75 10 50 1 25 0.1 0.1 s 1.0 s 10 s 100 s 1.0ms 10ms 0 0 25 50 75 100 125 o 150 175 200 td. PULSE WIDTH, sec. TL, LEAD TEMPERATURE, C FIG.3- PULSE WAVEFORM tr=10msec. PEAK PULSE CURRENT - % PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of lPPM FIG.4- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY IFSM, PEAK FORWARD SURGE CURRENT (A) 400 8.3ms Single Half Sine Wave JEDEC Method UNIDIRECTIONAL ONLY 150 350 100 PEAK VALUE lPPM 300 HALF VALUE- lPPM 2 10/1000msec. WAVEFORM as DEFINED by R.E.A. 50 250 200 150 0 td 0 1.0 2.0 t, TIME, ms 3.0 4.0 100 1 10 NUMBER OF CYCLES AT 60Hz 100 FIG.5- TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL Tj = 25 C f=1.0MHz Vsig=50mVp-p O FIG.6- STEADY STATE POWER DERATING CURVE PM(AV), STEADY STATE POWER DISSIPATION, WATTS 8 7 6 5 4 3 2 1 0 0 25 50 75 100 125 o 100,000 60Hz RESISTIVE OR INDUCTIVE LOAD CJ, JUNCTION CAPACITANCE. (pF) 10,000 MEASURED AT ZERO BIAS MEASURED AT STAND-OFF VOLTAGE VWM L=0.375"(9.5mm) LEAD LENGTHS 1.6 X 1.6 X .040" (40 X 40 X 1mm.) COPPER HEAT SINKS 1,000 150 175 200 TL, LEAD TEMPERATURE, C 100 1 10 100 200 V(BR), BREAKDOWN VOLTAGE. VOLTS 02.09.2007/rev. a ELECTRICAL CHARACTERISTICS (TA=25OC unless otherwise noted) Device Breakdown Voltage Test Current VBR @IT (Volts) (Note 1) Min Max (mA) Stand-Off Voltage VWM (Volts) Maximum Maximum Maximum Maximum Clamping Temperature Reverse Leakage Peak Pulse at VWM Current IRSM Voltage at IPPM Coefficient O (Note 2)(Amps) VC(Volts) of VBR(% / C) ID (uA) 5KP24A 26.7 29.5 5.0 24 10 129 38.9 0.101 1. VBR measured after IT applied for 300us, IT=square wave pulse or equivalent. 2. Surge current waverform per Figure 3 and derate per Figure 2. 3. All terms and symbols are consistent with ANSI/IEEE C62.35. |
Price & Availability of 5KP24A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |