 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ST1000C..K Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 1473 A FEATURES * Center amplifying gate * Metal case with ceramic insulator * International standard case A-24 (K-PUK) * High profile hockey PUK A-24 (K-PUK) RoHS COMPLIANT * Lead (Pb)-free TYPICAL APPLICATIONS PRODUCT SUMMARY IT(AV) 1473 A * DC motor controls * Controlled DC power supplies * AC controllers MAJOR RATINGS AND CHARACTERISTICS PARAMETER IT(AV) IT(RMS) ITSM I2 t I2t VDRM/VRRM tq TJ Range Typical Range TEST CONDITIONS VALUES 1473 Ths Ths 50 Hz 60 Hz 50 Hz 60 Hz 55 2913 25 20.0 21.2 2000 1865 20 000 1200 to 2600 300 - 40 to 125 UNITS A C A C A kA2s kA2s V s C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE 12 16 ST1000C..K 20 22 24 26 VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V 1200 1600 2000 2200 2400 2600 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 1300 1700 2100 2300 2500 2700 100 IRRM MAXIMUM AT TJ = 125 C mA Document Number: 93714 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 ST1000C..K Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 1473 A ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average on-state current at heatsink temperature Maximum RMS on-state current SYMBOL IT(AV) IT(RMS) TEST CONDITIONS 180 conduction, half sine wave Double side (single side) cooled DC at 25 C heatsink temperature double side cooled t = 10 ms Maximum peak, one-cycle, non-repetitive surge current ITSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2 t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing Low level value of threshold voltage High level value of threshold voltage Low level value of on-state slope resistance High level value of on-state slope resistance Maximum on-state voltage drop Maximum holding current Typical latching current I2t VT(TO)1 VT(TO)2 rt1 rt2 VTM IH IL No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied VALUES 1473 (630) 55 (85) 6540 20.0 21.2 17.0 Sinusoidal half wave, initial TJ = TJ maximum 18.1 2000 1865 1445 1360 20 000 0.950 1.024 0.283 0.265 1.80 600 1000 kA2s V kA2s A UNITS A C t = 0.1 to 10 ms, no voltage reapplied (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum (I > x IT(AV)), TJ = TJ maximum (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum (I > x IT(AV)), TJ = TJ maximum Ipk = 3000 A, TJ = 125 C, tp = 10 ms sine pulse TJ = 25 C, anode supply 12 V resistive load m V mA SWITCHING PARAMETER Maximum non-repetitive rate of rise of turned-on current Typical delay time Typical turn-off time SYMBOL dI/dt td tq TEST CONDITIONS Gate drive 20 V, 20 , tr 1 s TJ = TJ maximum, anode voltage 80 % VDRM Gate current 1 A, dIg/dt = 1 A/s Vd = 0.67 % VDRM, TJ = 25 C ITM = 550 A, TJ = TJ maximum, dI/dt = 40 A/s, VR = 50 V, dV/dt = 20 V/s, gate 0 V 100 , tp = 500 s VALUES 1000 1.9 s 300 UNITS A/s BLOCKING PARAMETER Maximum critical rate of rise of off-state voltage Maximum peak reverse and off-state leakage current SYMBOL dV/dt IRRM, IDRM TEST CONDITIONS TJ = TJ maximum linear to 80 % rated VDRM TJ = TJ maximum, rated VDRM/VRRM applied VALUES 500 100 UNITS V/s mA www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 93714 Revision: 11-Aug-08 ST1000C..K Series Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 1473 A TRIGGERING PARAMETER Maximum peak gate power Maximum peak average gate power Maximum peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage SYMBOL PGM PG(AV) IGM + VGM - VGM TJ = - 40 C DC gate current required to trigger IGT TJ = 25 C TJ = 125 C TJ = - 40 C DC gate voltage required to trigger VGT TJ = 25 C TJ = 125 C DC gate current not to trigger IGD TJ = TJ maximum DC gate voltage not to trigger VGD Maximum gate current/voltage not to trigger is the maximum value which will not trigger any unit with rated VDRM anode to cathode applied Maximum required gate trigger/ current/voltage are the lowest value which will trigger all units 12 V anode to cathode applied 200 100 50 1.4 1.1 0.9 10 TJ = TJ maximum, tp 5 ms TEST CONDITIONS TJ = TJ maximum, tp 5 ms TJ = TJ maximum, f = 50 Hz, d% = 50 VALUES TYP. MAX. 16 3 3.0 20 5.0 200 3.0 mA V mA UNITS W A V 0.25 V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink SYMBOL TJ TStg RthJ-hs DC operation single side cooled DC operation double side cooled DC operation single side cooled DC operation double side cooled TEST CONDITIONS VALUES - 40 to 125 - 40 to 150 0.042 0.021 0.006 0.003 24 500 (2500) 425 See dimensions - link at the end of datasheet N (kg) g K/W UNITS C Maximum thermal resistance, case to heatsink Mounting force, 10 % Approximate weight Case style RthC-hs A-24 (K-PUK) RthJC CONDUCTION CONDUCTION ANGLE 180 120 90 60 30 SINUSOIDAL CONDUCTION SINGLE SIDE 0.003 0.004 0.005 0.007 0.012 DOUBLE SIDE 0.003 0.004 0.005 0.007 0.012 RECTANGULAR CONDUCTION SINGLE SIDE 0.002 0.004 0.005 0.007 0.012 DOUBLE SIDE 0.002 0.004 0.005 0.007 0.012 TJ = TJ maximum K/W TEST CONDITIONS UNITS Note * The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Document Number: 93714 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 ST1000C..K Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 1473 A Maximum Allowable Heatsink Temperature (C) Maximum Allowable Heatsink Temperature (C) 130 120 110 100 90 80 70 130 120 110 100 90 80 70 60 50 40 0 400 30 ST1000C..K Series (Single Side Cooled) R thJ-hs (DC) = 0.042 K/W ST1000C..K Series (Double Side Cooled) R thJ-hs(DC) = 0.021 K/W Conduction Period Conduction Angle 30 60 90 120 180 DC 60 90 120 180 0 100 200 300 400 500 600 700 Average On-state Current (A) 800 1200 1600 2000 2400 Average On-state Current (A) Fig. 1 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Maximum Allowable Heatsink Temperature (C) Maximum Average On-state Power Loss (W) 130 120 110 100 90 80 70 30 3000 2500 2000 1500 1000 500 0 0 400 800 1200 1600 Average On-state Current (A) Conduction Angle ST1000C..K Series TJ = 125C 180 120 90 60 30 ST1000C..K Series (Single Side Cooled) R thJ-hs (DC) = 0.042 K/W RMS Limit Conduction Period 60 90 120 180 DC 1000 0 200 400 600 800 Average On-state Current (A) Fig. 2 - Current Ratings Characteristics Fig. 5 - On-State Power Loss Characteristics Maximum Allowable Heatsink Temperature (C) Maximum Average On-state Power Loss (W) 130 120 110 100 90 80 70 60 50 40 0 400 30 ST1000C..K Series (Double Side Cooled) R thJ-hs(DC) = 0.021 K/W 4000 3500 3000 2500 2000 1500 DC 180 120 90 60 30 RMS Limit Conduction Angle 60 90 120 180 Conduction Period 1000 500 0 0 500 1000 1500 2000 2500 Average On-state Current (A) ST1000C..K Series T J = 125C 800 1200 1600 Average On-state Current (A) Fig. 3 - Current Ratings Characteristics Fig. 6 - On-State Power Loss Characteristics www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 93714 Revision: 11-Aug-08 ST1000C..K Series Phase Control Thyristors Vishay High Power Products (Hockey PUK Version), 1473 A Peak Half Sine Wave On-state Current (A) 18000 16000 14000 12000 10000 8000 Peak Half Sine Wave On-state Current (A) At Any Rated Load Condition And With Rated V RRMApplied Following Surge. Initial T J 125C = @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 22000 20000 18000 16000 14000 12000 10000 8000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T J= 125C No Voltage Reapplied Rated V RRM Reapplied ST1000C..K Series ST1000C..K Series 6000 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) 6000 0.01 0.1 Pulse Train Duration (s) 1 Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled 10000 Instantaneous On-state Current (A) T = 25C J T = 125C J 1000 ST1000C..K Series 100 0.5 1 1.5 2 2.5 3 3.5 4 Instantaneous On-state Voltage (V) Fig. 9 - On-State Voltage Drop Characteristics Transient Thermal Impedance Z thJ-hs (K/W) 0.1 Steady State Value R thJ-hs = 0.42 K/W (Single Side Cooled) R thJ-hs = 0.21 K/W (Double Side Cooled) 0.01 (DC Operation) ST1000C..K Series 0.001 0.001 0.01 0.1 1 10 100 Square Wave Pulse Duration (s) Fig. 10 - Thermal Impedance ZthJ-hs Characteristics Document Number: 93714 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 ST1000C..K Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 1473 A 100 Instantaneous Gate Voltage (V) Rectangular gate pulse a) Recommended load line for rated di/dt : 20V, 10ohms; tr<=1 s b) Recommended load line for <=30% rated di/dt : 10V, 10ohms tr<=1 s (1) PGM = 16W, tp = 4ms (2) PGM = 30W, tp = 2ms (3) PGM = 60W, tp = 1ms 10 (a) (b) Tj=-40 C Tj=25 C 1 VGD IGD 0.1 0.001 0.01 Device: ST100C..K Series Instantaneous Gate Current (A) Fig. 11 - Gate Characteristics Tj=125 C (1) (2) (3) Frequency Limited by PG(AV) 0.1 1 10 100 ORDERING INFORMATION TABLE Device code ST 1 1 2 3 4 5 6 7 100 2 - 0 3 C 4 26 5 K 6 1 7 8 Thyristor Essential part number 0 = Converter grade C = Ceramic PUK Voltage code x 100 = VRRM (see Voltage Ratings table) K = PUK case A-24 (K-PUK) 0 = Eyelet terminals (gate and auxiliary cathode unsoldered leads) 1 = Fast-on terminals (gate and auxiliary cathode unsoldered leads) 2 = Eyelet terminals (gate and auxiliary cathode soldered leads) 3 = Fast-on terminals (gate and auxiliary cathode soldered leads) 8 - Critical dV/dt: None = 500 V/s (standard selection) L = 1000 V/s (special selection) LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95081 www.vishay.com 6 For technical questions, contact: ind-modules@vishay.com Document Number: 93714 Revision: 11-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of ST1000C12K0
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |