 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PSRL9802OS Series 200 Watt Single Output N + 1 Parallel Redundancy AC/DC Switching Power Supply FEATURES 2 Year Warranty Optional Top Cover N+1 Parallel Redundancy AC Input Range Auto-Selectable Approved to UL CUL TUV CB and CE Power Factor Corrected to EN61000-3-2 Class A Compact 1U Height & Power Density: 5.16 Watts/cu in Providing Peak Power 600W within 500uS Duty Duration 6.8(L) x 3.8(W) x 1.5(H) inches. SPECIFICATIONS: PSRL9802OS Series All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage 90 - 132 / 180 - 264vac, Auto-Selectable. Input Frequency 47 to 63Hz Input Current 5 / 2.5A at 115 / 230 VAC. Inrush Current Max. 70A @ 230VAC and 35A @ 115VAC; cold start. Leakage Current 1.5mA @ 240VAC. Remote On/Off Designated as REMO on the CN3. Requires a low signal to inhabit output; Hiccough mode. OUTPUT SPECIFICATIONS Output Voltage See Table Output Power Range 200 Watts max with airflow. (See Notes 3 and 4) Output Adjustability Output user adjustable 5% minimum. Total Regulation 1% Output Current See Table Ripple & Noise (peak to peak) 1% Transient Response Output voltage returns to within 1% in less than 2.5ms for a 50% load change, peak does not excess 5%. Hold-Up Time 20ms min. at 120VAC and 80% of full load. Overshoot Turn on-off overshoot < 5% over nominal voltage. Turn On Delay 1 second maximum at 120VAC. PROTECTION Over Voltage Protection Unit latching down when output exceeds 130% and recycle AC input to reset. Short Circuit Protection Trip without damage and auto-recovery. Over-Temperature Protection Unit protected of excessive operating ambient 85C, and automatic recovery. Over Load Protection Fold back mode 110-135%; auto-recovery. Input Circuit Protection One T5A/250V fuse inserted in primary. GENERAL SPECIFICATIONS Switching Frequency 25KHz fixed frequency. Efficiency 70% for 3.3V, 75% for 5V, 80% for 12V, and 83% min. for other outputs (Measuring at 230VAC and full load). 1500 VAC input line to chassis (10mA cut off current), 3000VAC primary to secondary, and 1500VAC primary Withstand Voltage to core. All for 3 sec. Burn In Applying 230VAC for input voltage. Applying full load for this product in 45 5C burn-in room for one hour. PFC Power factor correction pass EN61000-3-2 Class A (total parallel output power not exceed 200W). Designated as PG on the CN3 will go high 100-500ms after regulation and goes low 1ms before loss of Power Good regulation. Power Supply On Green LED designated as LED1 on the PCB. Grounding Test Apply 25A from ground pin of the three prong plug to the far most earth. Max. allowable resistance is 0.1 ohm. o Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSRL9802OS Series 200 Watt Single Output N + 1 Parallel Redundancy AC/DC Switching Power Supply SPECIFICATIONS (CONTINUED) ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity Vibration Cooling Fan Drive MTBF PHYSICAL SPECIFICATIONS Weight Dimensions Warranty SAFETY EMC Standards Safety Regulations 0C to +40C -20C to +85C 5% to 90% RH, non-condensing 5% to 95% RH, non-condensing Frequency 5 ~ 50Hz, acceleration 7.35 m/(s x s) on X, Y, and Z axis. 200W max with 18.7CFM airflow or 150W max under convection cooling. 12VDC/300mA is available to drive an external fan. 100,000 hours (according to MIL-HBK-217F) at 30C. 600 grams U-Chassis Type Enclosure: 6.8(L) x 3.8(W) x 1.5(H) inches. 2 years CISPR 22 / EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, EN55024 CE Marked (LVD). Approved to UL60950-1, CSA C22.2 No. 60950-1, TUV EN60950-1, and CB certificate available. OUTPUT VOLTAGE / CURRENT RATING CHART Output Voltage Range PSRL9802OSA 3 - 4 VDC PSRL9802OSB 5 - 6 VDC PSRL9802OSC 12 - 18 VDC PSRL9802OSD 24 - 30 VDC PSRL9802OSE 48 -56 VDC PSRL9802OS36 32 -46 VDC Model Preset Voltage 3.3 VDC 5 VDC 12 VDC 24 VDC 48 VDC 36 VDC Output Current Convection With Forced Air 22A 30A 22A 40A 12.5A 16.67A 6.25A 8.33A 3.13A 4.17A 4.17A 5.56A Regulation 1% 1% 1% 1% 1% 1% Ripple & Noise 1% 1% 1% 1% 1% 1% NOTES 1. All output ranges are covered in agency certifications and the preset voltage will be set as standard models. If any request is not standard output, then please contact us in advance. 2. 1% minimum load is required to maintain the ripple and regulation. 3. Maximum 200W continuous output, with minimum 18.7 CFM forced ventilation. 4. Maximum 150W continuous output with air convection, except PSRL9802OSA and PSRL9802OSB which Power is limited to 22A. 5. Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output terminals with parallel 0.1uF ceramic and 22uF electrolytic capacitors. 6. All series N+1 parallel redundancy. 7. Optional top cover available. Please call factory for ordering details. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSRL9802OS Series 200 Watt Single Output N + 1 Parallel Redundancy AC/DC Switching Power Supply MECHANICAL DRAWINGS Overall size: 6.8(L) x 3.8(W) x 1.5(H) inches; Weight: 600g. (Optional Top Cover) OUTPUT PIN CONNECTION Howder Molex Vo+: Pins 1 - 2 Vo+: Pins 1 - 6 Vo-: Pins 3 - 4 Vo-: Pins 7 - 12 I/O CONNECTOR PIN ASSIGNMENT AC Input Connector (CN1): Mating Molex Part No. 09-91-0500 or equivalent (5 pin,3 used) PCB is Labeled: L = Line; N = Neutral; G = Chassis Ground Mating Pins; Molex Engineering Series 2478, 2578, 8818 or Howder Terminal block Part No. FTB-702-3P (3 pin). Output Connector (CN2): Mating Molex Part No. 09-91-1200 (12 pin), or Howder Terminal block Part No. HD-301-4P (4 pin). Output Pin Assignment: See Output Pin Connection table above. Logic signal connector (CN3): Mating JST XHP-6 or equivalent (CHYAO SHIUNN JS-2001-06). Mating Pins: JST SXH-002T-P0.6 FOR AWG 30 to 26. Mounting Inserts: 8 Places M4. Maximum Penetration 4mm see outline drawing for location. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 |
Price & Availability of PSRL9802OS36
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |