|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
M62446AFP 6ch Electronic Volume with Tone Control REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Description The M62446AFP is 6ch electronic volume with tone control. This IC is revised from M62446FP. The extended function of M62446AFP is volume level and tone control level. M62446AFP is easy to use more than M62446FP. Features * 6ch Electric volume Volume level: 0 to -95 dB (1 dB/step)* Application DVD, Home Audio equipment, TV Recommended Operating Conditions Supply voltage range: 4.5 to 7.5 V (analog), 4.5 V to 5.5 V (digital) Recommended supply voltage: 7.0 V (analog), 5.0 V (digital) REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 1 of 18 M62446AFP System Block Diagram C in SW in SL in SR in BYPASS1 BYPASS2 L in R in -com interface volume volume volume volume Cout SWout SLout SRout Lout Rout tone volume volume LATCH DATA CLK REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 2 of 18 M62446AFP Pin Configuration and Block Diagram OUT4 OUT3 OUT2 OUT1 AVDD SW in GNDS SR in SL in GNDC C in GNDR R in GNDL L in BYPASSR BYPASSL LTRE LBASS3 LBASS2 LBASS1 1 2 3 4 5 volume 6 7 8 9 10 11 12 13 volume 14 15 16 17 18 19 20 21 tone tone volume volume 42 41 MCU volume I/F 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 40 DVDD CLK DATA LATCH DGND AGND SW out SR out SL out C out R out L out AVSS CL1 CL2 CR1 CR2 RTRE RBASS3 RBASS2 RBASS1 OUTPUT PORT volume REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 3 of 18 M62446AFP Pin Description Pin No. 1 2 3 4 5 7 10 12 14 6 8 9 11 36 35 34 33 13 15 16 17 31 32 18 25 19 24 20 23 21 26 22 28 27 29 31 32 Symbol OUT4 OUT3 OUT2 OUT1 AVDD GNDS GNDC GNDR GNDL SW in SR in SL in C in SW out SR out SL out C out R in L in BYPASSR BYPASSL L out R out LTRE RTRE 18,25 1 to 4 Function Port OUTPUT Circuit OUTPUT: PMOS Transistor open drain DVDD (= 5V) Analog positive power supply GND +7 V Connect to analog GND Volume INPUT 6,8,9,11 Volume OUTPUT 18 to 22 k (Typ) + - 33,34,35,36 Tone INPUT 13,15 70 k (Typ) + - L, R volume INPUT in BYPASS mode L OUTPUT R OUTPUT Tone treble cycle control 16,17 70 k (Typ) 18 to 22 k (Typ) + - 31,32 LBASS3 RBASS3 LBASS2 RBASS2 LBASS1 RBASS1 CR2 CL2 CR1 CL1 L out R out Tone bass cycle control 2.3 k (Typ) 19,24 20,23 + - 21,22 Tone OUTPUT 26,28 L, R volume INPUT 27,29 70 k (Typ) 18 to 22 k (Typ) + - 31,32 L OUTPUT R OUTPUT REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 4 of 18 M62446AFP Pin No. 30 37 38 39 40 41 42 Symbol AVSS AGND DGND LATCH DATA CLK DVDD Function Analog negative power supply Analog GND Digital GND Latch INPUT Data INPUT Clock INPUT forward data Digital power supply +5 V -7 V Circuit 39,40,41 S INPUT: schmitt trigger type Absolute Maximum Ratings Item Supply voltage Power dissipation Thermal derating Operating temperature Storage temperature Symbol Vsupply Pd K Topr Tstg Ratings 16 7 1000 10 -20 to +75 -40 to +125 Unit V mW mW/C C C Condition AVDD - AVSS DVDD - DGND Ta 25 C Ta > 25 C Thermal Derating (Maximum Rating) (with the standard board) 1.5 Power Dissipation Pd (W) 1.0 0.5 0 0 25 50 75 100 125 150 Ambient Tenperature Ta (C) *Standard board * board size 70 mm x 70 mm * board thickness 1.6 mm * board material glass epoxy * copper pattern copper thickness 18 m copper size 0.25 mm (wide) 30 mm (length/lead) REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 5 of 18 M62446AFP Recommended Operating Condition (Ta = 25C, unless otherwise noted) Item Analog positive supply voltage Analog negative supply voltage Digital supply voltage High-level input voltage Low-level input voltage Note: Symbol AVDD AVSS DVDD VIH VIL Min 4.5 -7.5 4.5 DVDD x 0.7 DGND Typ 7.0 -7.0 5.0 -- -- Max 7.5 -4.5 5.5 DVDD DVDD x 0.3 Unit V V V V V Condition AVSS DGND < DVDD AVDD Relationship between Data and Clock and Latch H D0 DATA L D1 DE DF D0 H CLOCK L H LATCH L Note: CLOCK and LATCH function at raising edges of pulse. REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 6 of 18 M62446AFP Data Timing (Recommended Conditions) tcr CLOCK 75% 25% tr tWHC tf tWLC 75% DATA 25% tsc tr tf tWHL tr tSL LATCH 25% tf tSD tHD 75% 25% Digital Block Timing Regulation Item CLOCK cycle time CLOCK pulse width ("H" level) CLOCK pulse width ("L" level) CLOCK, DATA, LATCH rise time CLOCK, DATA, LATCH fall time DATA setup time DATA hold time LATCH setup time LATCH pulse width CLOCK start time after LATCH Symbol tcr tWHC tWLC tr tf tSD tHD tSL tWHL tSC Min 8 3.2 3.2 -- -- 1.6 1.6 2 3.2 3.2 Limits Typ -- -- -- -- -- -- -- -- -- -- Max -- -- -- 0.8 0.8 -- -- -- -- -- Unit s REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 7 of 18 M62446AFP Digital Control Specification Fore kinds of input format options are available by changing slot settings of DE and DF. (When the IC is powered up, the internal settings are not fixed.) (1) D01 D11 D21 D31 D41 1 TONE CONT TLEBLE OUTPUT PORT n CONT High: 1,Low: 0 D51 2 D61 3 D71 4 TONE CONT BASS 0 TONE :0 BYPASS :1 D81 D91 DA1 DB1 DC1 DD1 DE DF 0 0 (2) D02 D12 D22 D32 D42 D52 D62 D72 D82 D92 DA2 DB2 DC2 DD2 DE DF VOLUME Lch VOLUME Rch 0 1 (3) D03 D13 D23 D33 D43 D53 D63 D73 D83 D93 DA3 DB3 DC3 DD3 DE DF VOLUME Cch VOLUME SWch 1 0 (4) D04 D14 D24 D34 D44 D54 D64 D74 D84 D94 DA4 DB4 DC4 DD4 DE DF VOLUME SLch VOLUME SRch 1 1 REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 8 of 18 M62446AFP Setting Code (1) Tone Control (Bass/Treble) ATT Treble Bass * -14 dB * -12 dB -10 dB -8 dB -6 dB -4 dB -2 dB +0 dB +2 dB +4 dB +6 dB +8 dB +10 dB * +12 dB * +14 dB Note: * is an extended function. D01 D81 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D11 D91 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 D21 DA1 1 0 1 0 1 1 0 0 0 1 1 0 1 0 1 D31 DB1 1 1 0 0 1 0 1 0 1 0 1 0 0 1 1 (2) Port Output D41 D51 D61 D71 Out: H Out: L 1 0 (3) Bypass Control DD1 BYPASS TONE Note: 1 0 Do not input other data than the above. REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 9 of 18 M62446AFP (4)-1 Volume (0 to -39 dB) ATT Volume 0 dB -1 dB -2 dB -3 dB -4 dB -5 dB -6 dB -7 dB -8 dB -9 dB -10 dB -11 dB -12 dB -13 dB -14 dB -15 dB -16 dB -17 dB -18 dB -19 dB -20 dB -21 dB -22 dB -23 dB -24 dB -25 dB -26 dB -27 dB -28 dB -29 dB -30 dB -31 dB -32 dB -33 dB -34 dB -35 dB -36 dB -37 dB -38 dB -39 dB Note: D0X D7X 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D1X D8X 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D2X D9X 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D3X DAX 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D4X DBX 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 D5X DCX 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 D6X DDX 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Do not input other data than the above. REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 10 of 18 M62446AFP (4)-2 Volume (-40 to - dB) ATT Volume -40 dB -41 dB -42 dB -43 dB -44 dB -45 dB -46 dB -47 dB -48 dB -49 dB -50 dB -51 dB -52 dB -53 dB -54 dB -55 dB -56 dB -57 dB -58 dB -59 dB -60 dB -61 dB -62 dB -63 dB -64 dB -65 dB -66 dB -67 dB -68 dB -69 dB -70 dB -71 dB -72 dB -73 dB -74 dB -75 dB -76 dB -77 dB -78 dB -79 dB - dB Note: D0X D7X 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D1X D8X 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D2X D9X 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 D3X DAX 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 D4X DBX 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 D5X DCX 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 D6X DDX 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 Do not input other data than the above. REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 11 of 18 M62446AFP (4)-3 VOLUME (-80 to - dB) This is an extended function from M62446FP. ATT Volume - dB - dB - dB D0X D7X 1 1 1 D1X D8X 0 0 0 D2X D9X 1 1 1 D3X DAX 0 0 0 D4X DBX 0 0 0 D5X DCX 0 1 1 D6X DDX 1 0 1 - dB - dB -80 dB -81 dB -82 dB -83 dB -84 dB -85 dB -86 dB -87 dB -88 dB -89 dB -90 dB -91 dB -92 dB -93 dB -94 dB -95 dB - dB - dB 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 - dB - dB 1 1 1 1 1 1 1 1 1 1 1 1 0 1 REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 12 of 18 M62446AFP Electrical Characteristics (Ta = 25C, AVDD/AVSS/DVDD = 7/-7 V/5 V, f = 1 kHz, unless otherwise noted. Rg = 1 k, RL = 10 k, TONE CONTROL * VOL are set to 0 dB/FLAT.) (1) Power Supply Characteristics Item Analog positive circuit current Analog negative circuit current Digital circuit current Symbol Aldd Alss Dldd Min -- -- -- Limits Typ 22 22 1.0 Max 35 35 2.0 Unit mA mA mA Test Condition Current at pin 5 No signal Current at pin 30 No signal Current at pin 42 No signal (2) Input/Output Characteristics Item Input resistance Maximum output voltage Symbol Ri VOM Min 35 3.0 Limits Typ 70 4.2 Max 150 -- Unit k Vrms Test Condition 13, 15, 16, 17, 27, 29 pin 6, 8, 9, 11, 13, 15, 16, 17 pin INPUT 31 to 36 pin OUTPUT THD = 1% Vi = 0.2 Vrms, FLAT 8, 9, 11, 13, 15, 16, 17 pin INPUT 31 to 36 pin OUTPUT BW = 400 to 30 kHz Vi = 0.2 Vrms, RL = 10 k Pass gain Gv -2.0 0 2.0 dB Distortion Output noise voltage THD Vn (VOL) Vn (tone) -- -- -- -- -1.5 -- 0.2 0.002 1.5 5 -100 0 -80 -- 0.09 6 20 -95 1.5 -65 -- % Maximum attenuation Volume gain between channels Crosstalk between channels Port output current ATTmax Dvol CT IL Vrms 31 to 36 pin, Rg = 0 k, JIS-A, VOL = 0 dB Vrms 31, 32 pin JIS-A, VOL = 0 dB dB 31 to 36 pin JIS-A, VOL = - dB dB dB mA Vo = 0.5 Vrms, RL = 10 k, JIS-A, Rg = 1 k REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 13 of 18 M62446AFP (3) Tone Control Characteristics Item Tone control voltage gain Symbol *T +14 dB *T +12 dB T +10 dB T +8 dB T +6 dB T +4 dB T +2 dB T -2 dB T -4 dB T -6 dB T -8 dB T -10 dB *T -12 dB *T -14 dB BALT Min 12 10 8 6 4.5 2.5 1 -3 -5.5 -7.5 -10 -12 -14 -16 -1.5 Limits Typ 14 12 10 8 6 4 2 -2 -4 -6 -8 -10 -12 -14 0 Max 16 14 12 10 7.5 5.5 3 -1 -2.5 -4.5 -6 -8 -10 -12 +1.5 Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Test Condition Vo = 0.2 Vrms, TREBLE (f = 10 kHz), BASS (f = 100 Hz), Voltage gain (Input to pin 13, 15 Output from pin 31, 32) INPUT 13, 15 pin OUTPUT 31, 32 pin Balance between channel Note: * is an extended function. Input 13, 15 pin Vo = 0.2 Vrms Output 31, 32 pin REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 14 of 18 M62446AFP Test Circuit 1 22 k 1 2 3 4 3.3 + - 42 41 40 CLK DATA 2 22 k 22 + DVDD 3 22 k 4 22 k 22 + - 39 LATCH 38 37 36 35 34 33 DGND AGND 3.3 10 k 3.3 10 k 3.3 10 k 3.3 10 k 3.3 10 k 3.3 10 k AVDD Vi6 (SW) + 5 6 + - 1k 3.3 Vi8 (SR) Vi9 (SL) 1k 3.3 Vi11 (C) 1k Vi13 (R) 1k Vi15 (L) Vi16 (BYPASSR) Vi17 (BYPASSL) 3.3 1k 1k 1k 8200 p 0.015 0.33 3.3 3.3 3.3 1k 3.3 7 8 9 10 70 k 70 k 70 k Vo36 Vo35 Vo34 Vo33 Vo32 Vo31 + - 11 12 + - 32 31 30 29 28 S T 70 k 13 14 70 k Bass + - + - + - 22 3.3 Treble + - Bass + AVSS 15 16 Treble + - 27 + - 70 k 17 18 + - 3.3 26 25 8200 p 0.015 0.33 19 20 21 24 23 22 REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 15 of 18 M62446AFP Signal Processing Diagram BYPASS 3.3 F TONE CONTROL (+14 dB to -14 dB) TONE in 3.3 F + - 70 k BASS + - TLEBLE + - 3.3 F 70 k 70 k VOLUME Lch,Rch (0 dB to - dB) + - 3.3 F 8200 pF 0.015 F 0.33 F VOLUME in 3.3 F VOLUME Cch,SWch,SLch,SRch (0 dB to - dB) + - 3.3 F Notes: 1. The resistance value of Volume change about 18 to 22 k by attenuated condition. 2. No built a zero cross circuit. 3. When the mode changed (BYPASS/TONE), it is necessary the muting function. DVDD ( = 5 V) CLK, DATA, LATCH S INPUT: Schmitt trigger type OUTPUT PORT OUTPUT port: PMOS transistor open drain REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 16 of 18 M62446AFP Application Example When using Tone control and Bypass 0.001 F 22 k OUT4 22 k OUT3 22 k OUT2 OUT1 22 k 4 47 F 0.0047 F + 10 F 1 2 3 42 41 MCU volume I/F 39 38 volume 37 36 3.3 F 35 3.3 F 34 3.3 F 33 volume 3.3 F 32 3.3 F 31 30 volume 0.0047 F DVDD = 5 V OUTPUT PORT 40 MCU AVDD = 7 V SWin + 5 6 7 DGND AGND 3.3 F SWout SRout SLout Cout Rout Lout AVSS = -7 V + 47 F 3.3 F 3.3 F SRin 3.3 F SLin 9 10 3.3 F Cin 11 12 3.3 F Rin 13 14 3.3 F Lin 3.3 F 16 BYPASSRin BYPASSLin 18 8200 pF 19 0.015 F 20 0.33 F 21 22 tone tone 23 24 25 3.3 F 17 26 volume 27 15 28 8 volume 29 3.3 F 3.3 F 8200 pF 0.015 F 0.33 F REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 17 of 18 M62446AFP Package Dimensions 42P2R-A EIAJ Package Code SSOP42-P-450-0.80 42 MMP JEDEC Code -- Weight(g) 0.63 22 Plastic 42pin 450mil SSOP Lead Material Alloy 42/Cu Alloy e b2 HE E e1 F Recommended Mount Pad Dimension in Millimeters Min Nom Max 2.4 -- -- -- -- 0.05 -- 2.0 -- 0.5 0.4 0.35 0.2 0.15 0.13 17.7 17.5 17.3 8.6 8.4 8.2 -- 0.8 -- 12.23 11.93 11.63 0.7 0.5 0.3 -- 1.765 -- 0.75 -- -- -- 0.9 -- 0.15 -- -- 0 -- 10 -- -- 0.5 -- 11.43 -- -- 1.27 -- Symbol 1 21 A G D A2 e y b A1 A A1 A2 b c D E e HE L L1 z Z1 y b2 e1 I2 L1 c z Z1 Detail G Detail F REJ03F0212-0201 Rev.2.01 Mar 31, 2008 Page 18 of 18 L I2 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 http://www.renesas.com Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 (c) 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2 |
Price & Availability of M62446AFP |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |